you can fairly add more NTP time servers in the NTP time section in the GUI...
preferably using numerical format(IP) looking like:
216.239.35.4 162.159.200.123
those 2 are google and cloudflare NTP time, but you can add others too, the format is a like this with space/interval in between...
than again if not using DNSmasq, but only SmartDNS you better not use anything regarding servers in advanced DNSmasq, although it shouldn't be a problem...i guess..
Thanks. I got it working. I put the IP on the setup page and used the server= format in SmartDNS. I hope others learn from this thread. _________________ Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
you can fairly add more NTP time servers in the NTP time section in the GUI...
preferably using numerical format(IP) looking like:
216.239.35.4 162.159.200.123
those 2 are google and cloudflare NTP time, but you can add others too, the format is a like this with space/interval in between...
than again if not using DNSmasq, but only SmartDNS you better not use anything regarding servers in advanced DNSmasq, although it shouldn't be a problem...i guess..
Thanks. I got it working. I put the IP on the setup page and used the server= format in SmartDNS. I hope others learn from this thread.
SmartDNS format for adding plain servers is like
server 1.1.1.1 ....so there is no '='
for tls(DoT) or https (DoH) is different...
https://github.com/pymumu/smartdns/blob/master/ReadMe_en.md _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913