Joined: 18 Mar 2014 Posts: 12834 Location: Netherlands
Posted: Sun Jan 01, 2023 8:01 Post subject:
I will move your thread to the appropriate forum.
See the forum guidelines with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
While the router is running simply press the reset button for a couple of seconds.
When the router is rebooted you are greeted with the page to enter a new username and password.
Make sure your browser still supports http and not only https
so the address is http://192.168.1.1
Note http and not https
Joined: 16 Nov 2015 Posts: 6407 Location: UK, London, just across the river..
Posted: Sun Jan 01, 2023 9:31 Post subject: Re: After the router is restarted, it fails again,
15563601 wrote:
After the router is restarted, it fails again,
more details needed ...
firmware build number...
browser used to access the WEB interface...
what was the reason, that router started to behave like this...
can you tftp to stock...
is the router operational at all...
and whatever you can provide as information...any detail or pictures of your set up (cover the sensitive data) could help...
If your router started to behave like this after you flashed to ddwrt that you have either to try fix
it or get back to stock and try again..or stay on stock firmware...
Happy New Year ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 01 Jan 2023 Posts: 13 Location: China HeBei
Posted: Sun Jan 01, 2023 9:35 Post subject: Re: After the router is restarted, it fails again,
路由器型号Netgear Nighthawk X10 (R9000)
固件版本DD-WRT v3.0-r51140 (12/31/22)
内核版本Linux 4.9.336 #657 SMP Sat Dec 17 00:53:25 +07 2022 armv7l
TFTP is available,
EDGE browser and Google browser are not good, details? This refers to the configuration? Or what
Alozaros wrote:
15563601 wrote:
After the router is restarted, it fails again,
more details needed ...
firmware build number...
browser used to access the WEB interface...
what was the reason, that router started to behave like this...
can you tftp to stock...
is the router operational at all...
and whatever you can provide as information...any detail or pictures of your set up (cover the sensitive data) could help...
If your router started to behave like this after you flashed to ddwrt that you have either to try fix
it or get back to stock and try again..or stay on stock firmware...
Joined: 16 Nov 2015 Posts: 6407 Location: UK, London, just across the river..
Posted: Sun Jan 01, 2023 9:57 Post subject:
so, unit is operational via wire, but no-WiFi radios ...
or there are WiFi radios SSID (shown), but you cannot connect to them...
Did you reset after upgrade and than reconfigure manually...( i use pale-moon browser)
After the reset ware there radios ?
Do not load/use save files from different builds!
Joined: 01 Jan 2023 Posts: 13 Location: China HeBei
Posted: Mon Jan 02, 2023 1:46 Post subject:
In the 51040 version, the web access is normal. The only problem is that only 433 mobile phone WiFi cannot reach 866
I am a Chinese, and my English is poor. I am not familiar with this place. How do I deal with this situation
Alozaros wrote:
so, unit is operational via wire, but no-WiFi radios ...
or there are WiFi radios SSID (shown), but you cannot connect to them...
Did you reset after upgrade and than reconfigure manually...( i use pale-moon browser)
After the reset ware there radios ?
Do not load/use save files from different builds!
Joined: 15 Aug 2016 Posts: 223 Location: Melbourne, Australia
Posted: Mon Jan 02, 2023 3:12 Post subject:
I wrote a document on setting up VLANs on Netgear R9000.
While it's much more than what you're trying at this stage, i think being aware of certain aspects of R9000 may be helpful to you. Be patient with the R9000 is the clue here.
The link is in my signature. _________________ Life is a journey; travel alone makes it less enjoyable and lonely.
Joined: 01 Jan 2023 Posts: 13 Location: China HeBei
Posted: Mon Jan 02, 2023 3:15 Post subject:
Thank you. I'll try to configure it as you say
DWCruiser wrote:
I wrote a document on setting up VLANs on Netgear R9000.
While it's much more than what you're trying at this stage, i think being aware of certain aspects of R9000 may be helpful to you. Be patient with the R9000 is the clue here.
Joined: 01 Jan 2023 Posts: 13 Location: China HeBei
Posted: Mon Jan 02, 2023 4:15 Post subject:
According to your link, find the relevant configuration. The next two links are. Now there is a problem with the indicator light. The link you gave me is also available. I'll try it later
I wrote a document on setting up VLANs on Netgear R9000.
While it's much more than what you're trying at this stage, i think being aware of certain aspects of R9000 may be helpful to you. Be patient with the R9000 is the clue here.