Posted: Sat Dec 31, 2022 10:46 Post subject: New Build - 12/31/2022 - r51140
Welcome to Atheros r51140 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Netgear R9000
File/Kernel: factory-to-ddwrt.img / Linux 4.9.336 #657 SMP Sat Dec 17 00:53:25 +07 2022 armv7l
Previous/Reset: V1.0.5.42 / No
Mode/Status: Router
Issues/Errors: Initial upgrade from original firmware went fine.
Happy New Year to everyone! _________________ Several NetGears with Broadcom and with Atheros
Mode: RIP2 Router, 2G/5G radios are active, Routed WiFi multiple SSID's/separated by IP subnets.
Remote Syslog, NTP, IPv6 management, WireGuard routed Site-2-Site VPNs
12-31-2022-r51140, htop command via ssh putty does not work on wdr3600 rev 1.5 _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
Posted: Sat Dec 31, 2022 13:58 Post subject: Happy new year to all!
Router/Version: Netgear R9000
File/Kernel: Linux 4.9.336 #657 SMP Sat Dec 17 00:53:25 +07 2022 armv7l
Previous/Reset: 15-Dez-2022-r51032, no reset
Mode/Status: AP, 802.11r (FT) on wlan0 and wlan1
Issues/Errors: wlan's working, speed ok
Router/Version: Netgear R7800
File/Kernel: Linux 4.9.336 #1463 SMP Sat Dec 31 03:34:48 +07 2022 armv7l
Previous/Reset: 15-Dez-2022-r51032, no reset
Mode/Status: AP, 802.11r (FT) on wlan0 and wlan1
Issues/Errors: wlan's working, speed ok
Router/Version: D-LINK DAP-2660
File/Kernel: Linux 3.18.140-d6 #160034 Sat Dec 31 09:03:01 +06 2022 mips
Previous/Reset: 05-Oct-2022-r50357, no reset
Mode/Status: AP, 802.11r (FT) on wlan0 and wlan1
Issues/Errors: wlan's working; 5GHz wifi is working again, speed ok
Router/Version: Netgear XR500 Nighthawk Pro Gaming
Firmware: DD-WRT v3.0-r51140 std (12/31/22)
Kernel: Linux 4.9.336 #1463 SMP Sat Dec 31 03:34:48 +07 2022 armv7l
Previous: DD-WRT v3.0-r51040 std (12/17/22)
Update Method: CLI/SSH/Putty
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz - Vanilla , 2.4 GHz guest (VAP), 5.0 GHz - Vanilla, IPv4, DHCP, DNSMasq, Static Leases, Port Forwarding, USB, NAS, Samba exFAT (User/Password required), NTP Client, Wireguard Server, and Wake-on-WAN (Internet)
Issues/Errors:
(1) Updated using CLI/SSH/Putty but the router reset to default settings so the configuration needed to be manually reapplied.
(2) USB drive mounts but is not accessible from Windows 10 using Explorer, but is accessible using WinSCP _________________ Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
Same issues as Nickant & d00zah. EA8500s all boot back to the previously installed build. My XR500 reset to defaults, but seems to be working fine after reconfiguration. My R7500v2s seem good so far. _________________ Current devices:
XR500 - gateway
5x R7500v2 - AP
OpenMediaVault server for tailscale, SMB, & Emby