Posted: Mon Nov 28, 2022 10:25 Post subject: New Build - 11/28/2022 - r50963
Welcome to Broadcom r50963 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 24 Feb 2013 Posts: 1625 Location: Belgrade
Posted: Mon Nov 28, 2022 12:28 Post subject:
Router/Version: Netgear R8000 (main router)
Kernel Version: Linux 4.4.302-st28 #8308 SMP Mon Nov 28 05:21:43 +06 2022 armv7l
Previous/Reset: No
Mode/Status: Working stable (up 8:1, IPv6 PD with dnsmasq used for RA (radvd disabled - old androids don't like it), mactelnet,
ssh, mDNS / Avahi, ksmbd with USB share, wl0 VHT80 ch.149, wl1 HT40 ch.9, wl2 VHT80 ch.52 regdomain Canada, WG Server with routed ipv6
Issues/Errors: None
Router/Version: Netgear R6250 (Station)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: No
Mode/Status: Working stable (up 8:29), basic functions as station
Issues/Errors: None
Joined: 18 Mar 2014 Posts: 12468 Location: Netherlands
Posted: Mon Nov 28, 2022 14:46 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r50963M Community Build (11/28/22)
Kernel Version: Linux 4.4.302-st28 #1 SMP Mon Nov 28 14:01:01 CET 2022 armv7l
Upgraded from: DD-WRT v3.0-r50841M Community Build (11/09/22)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz with unbridged VAP and 5 GHz.
Throughput testing is the same as reported at: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333373&start=3
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
Upgraded from: DD-WRT v3.0-r50551 std
No reset - Upgrade in GUI
Errors: no in log but issue with IPV4 connectivity.
Test with 2 Netgear R7000 (cf signature)
Same problem :
After upgrade and reboot, i lost IPV4 connectivity. NO IPV4 in netgear.
After new reboot (electric), IPV4 OK (in GUI and with an IFCONFIG) but SSH seems to be broken in IPV4. i can connect on SSH with IPV6
Rollback to : v3.0-r50551 => SSH OK in IPV4 _________________ Netgear R7000 :
#1 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP Off / IPv4 only / VAP Off & Wifi 2.4 / 5Ghz #2 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP On / IPv4 & IPv6 / VAP On & Wifi 2.4 / 5Ghz & Isolated Guest Network
Router/Version: DLink DIR-885L File/Kernel: r50963 Previous/Reset: no Mode/Status: Repeater Issues/Errors: Problemas com distribuição de IPs e baixa performance do wi-fi / Some bugs
Using the repeater mode, I faced problems such as failure in the ip distribution in the 5G network when restarting, it is only corrected when restarting again. I also had a problem with the ip on the network cable, having to wait a few precious minutes. The cable performance is great, the speed is 500Mbps, practically the available speed, but the wifi suffers on the 5G network, obtaining 290Mbps. In the 2.4G network the speed is great, 122Mbps.
I know that Broadcom ARM heats up a lot, but I think 75°C is worrying. Or is it normal?
Can experimental drivers be used normally?
Sorry to go into this subject here, it lacks detailed and easily accessible information
Upgraded from: DD-WRT v3.0-r50551 std
No reset - Upgrade in GUI
Errors: no in log but issue with IPV4 connectivity.
Test with 2 Netgear R7000 (cf signature)
Same problem :
After upgrade and reboot, i lost IPV4 connectivity. NO IPV4 in netgear.
After new reboot (electric), IPV4 OK (in GUI and with an IFCONFIG) but SSH seems to be broken in IPV4. i can connect on SSH with IPV6
Rollback to : v3.0-r50551 => SSH OK in IPV4
I updated my R7000 to this build yesterday evening. No issues with IPV4. There seems to be a problem with SSH though. _________________ Netgear R7000 on Build 53939
Asus AC-AC68U rev. C1 (AP) on Build 53939
Asus AC-68U rev. A1 on Build 53694
Asus AC-68U rev. A1 on Build 53339
Joined: 18 Mar 2014 Posts: 12468 Location: Netherlands
Posted: Tue Nov 29, 2022 8:53 Post subject:
If you have trouble connecting with SSH then download the latest Putty and make sure under SSH/Host keys to move ed25519 to the top and untick "Prefer Algorithms for which a host key is known" or forget/remove the HOST keys.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-50963_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r50963 big (11/28/22) (prev. DD-WRT v3.0-r50906 big (11/18/22))
Kernel: Linux 4.4.302-st28 #20301 Mon Nov 28 05:55:52 +06 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed a few hours ago, ok.
Joined: 26 Mar 2013 Posts: 1744 Location: Hung Hom, Hong Kong
Posted: Tue Nov 29, 2022 12:33 Post subject:
LiloBzH wrote:
Router Model: R7000
Kernel Version: DD-WRT v3.0-r50963 std
Upgraded from: DD-WRT v3.0-r50551 std
No reset - Upgrade in GUI
Errors: no in log but issue with IPV4 connectivity.
Test with 2 Netgear R7000 (cf signature)
Same problem :
After upgrade and reboot, i lost IPV4 connectivity. NO IPV4 in netgear.
After new reboot (electric), IPV4 OK (in GUI and with an IFCONFIG) but SSH seems to be broken in IPV4. i can connect on SSH with IPV6
Rollback to : v3.0-r50551 => SSH OK in IPV4
Newer builds changed the host key which is based on ED25519 instead of RSA. You need to download the new host keys by removing the old entry in your client's ~/.ssh/known_hosts file. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Netgear R6300v1
File/Kernel: dd-wrt.v24-50963_NEWD-2_K3.x_giga-R6300.bin/Linux 4.4.302-st28
Previous/Reset: 50671/no reset
Mode/Status: AP/switch
Issues/Errors: none
This version works fine, as opposed to r50927, which resulted in a blinking power LED and needing to revert to 50671: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1276281#1276281.
Firmware: v3.0-r50963 std (11/28/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous: v3.0-r50906 std (11/18/22)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Power-off boot before and soft boot after upgrade
Temperatures: CPU 60.2 °C / WL0 46.3 °C / WL1 51.2 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
, IPv6 PD with dnsmasq used for RA (radvd disabled - old androids don't like it), mactelnet,
