Help in SIP Account setup

Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions
Author Message
seneka21
DD-WRT Novice


Joined: 12 Nov 2022
Posts: 6

PostPosted: Sat Nov 12, 2022 21:23    Post subject: Help in SIP Account setup Reply with quote
I am unsuccessfully trying to get a Yuboto VOIP connection working.
I use the Flyingvoice FTA1101 Adapter which as I understand is running some VOIP version of DD-WRT.
My basic router is a Linksys WRT1900ACS.
My SIP account and relevant setup can be seen in the attached pics.
Testing making phone calls with a softphone (GS Wave android app) connected on the same Linksys router under the same Yuboto account worked OK.
I’ve got tired just wasting my time trying on this.
Sad
I would be so thankful for any help. Smile



DD-WRT VOIP .jpg
 Description:
 Filesize:  4.07 MB
 Viewed:  1213 Time(s)

DD-WRT VOIP .jpg


Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sat Nov 12, 2022 22:05    Post subject: Reply with quote
Good luck getting help with a 3rd Party piece of equipment that is not directly supported by this firmware.
The webUI of the device is definitely dated by the looks of it. I have contacted the lead developer.

https://www.flyingvoice.com/products/voip-adapter/fta1101.html

http://esp.flyingvoice.com/faq/120.html

https://usermanual.wiki/Flyingvoice-Network-Technology/FTA1101/html

https://www.yuboto.com/services/voip-telephony

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
seneka21
DD-WRT Novice


Joined: 12 Nov 2022
Posts: 6

PostPosted: Sun Nov 13, 2022 9:31    Post subject: Reply with quote
kernel-panic69 wrote:
Good luck getting help with a 3rd Party piece of equipment that is not directly supported by this firmware.
The webUI of the device is definitely dated by the looks of it. I have contacted the lead developer.

https://www.flyingvoice.com/products/voip-adapter/fta1101.html

http://esp.flyingvoice.com/faq/120.html

https://usermanual.wiki/Flyingvoice-Network-Technology/FTA1101/html

https://www.yuboto.com/services/voip-telephony


Dear kernel-panic69, thank you very much for your time. Still looking for a solution. Smile
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Sun Nov 13, 2022 10:20    Post subject: Reply with quote
Not with that old firmware version you wont. And not even sure the backend for VOIP works anymore, We removed Milkfish which was defunct for one, We still have asterisk, But thats not available on your platform apparently

https://svn.dd-wrt.com/browser/src/router/configs/mvebu/.config_wrt1900ac#L78

And Im unsure if we even have any other support available for SIP or if its available for your platform.

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sun Nov 13, 2022 12:28    Post subject: Re: Help in SIP Account setup Reply with quote
This isn't the WRT1900 in question. It's a 3rd-party device.

seneka21 wrote:
I am unsuccessfully trying to get a Yuboto VOIP connection working.
I use the Flyingvoice FTA1101 Adapter which as I understand is running some VOIP version of DD-WRT.
My basic router is a Linksys WRT1900ACS.
My SIP account and relevant setup can be seen in the attached pics.
Testing making phone calls with a softphone (GS Wave android app) connected on the same Linksys router under the same Yuboto account worked OK.
I’ve got tired just wasting my time trying on this.
Sad
I would be so thankful for any help. Smile

The question is, is this device behind the WRT1900 or ahead of it? IOW, is this device between the ISP modem and the WRT1900 or not? Outside of that, we cannot support a 3rd-party developed firmware here unless the lead developer himself knows anything about it. Still no reply from him.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
seneka21
DD-WRT Novice


Joined: 12 Nov 2022
Posts: 6

PostPosted: Sun Nov 13, 2022 15:36    Post subject: Reply with quote
First of all I want to thank you once more for your time.
My setup goes as the attached picture below.
My problem is not with the Linksys Router but with the VOIP ATA indeed.



schematic .png
 Description:
 Filesize:  326.61 KB
 Viewed:  1088 Time(s)

schematic .png


dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Sun Nov 13, 2022 19:41    Post subject: Reply with quote
Port forwards may be required or placing the ATA's WAN IP in your WRT1900s DMZ.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
seneka21
DD-WRT Novice


Joined: 12 Nov 2022
Posts: 6

PostPosted: Sun Nov 13, 2022 20:05    Post subject: Reply with quote
dale_gribble39 wrote:
Port forwards may be required or placing the ATA's WAN IP in your WRT1900s DMZ.


Thank you dale_gribble39 for the suggestion. Smile
I will try.
In any case I can't understand why Softphone app "GS Wave" on my mobile which is connected to WRT1900s works fine without any port forwarding or DMZ or anything else. Confused
seneka21
DD-WRT Novice


Joined: 12 Nov 2022
Posts: 6

PostPosted: Mon Nov 14, 2022 7:55    Post subject: Reply with quote
seneka21 wrote:
dale_gribble39 wrote:
Port forwards may be required or placing the ATA's WAN IP in your WRT1900s DMZ.


Thank you dale_gribble39 for the suggestion. Smile
I will try.
In any case I can't understand why Softphone app "GS Wave" on my mobile which is connected to WRT1900s works fine without any port forwarding or DMZ or anything else. Confused


Unfortunately, port forwarding didn't work either. Sad
seneka21
DD-WRT Novice


Joined: 12 Nov 2022
Posts: 6

PostPosted: Mon Nov 14, 2022 11:52    Post subject: [SOLVED] Help in SIP Account setup Reply with quote
The solution was pretty simple and was provided by a Flyingvoice's technical assistant.
As is depicted in the attached pic (red rectangle), I should have put in "Phone Number" field, under SIP Account menu, my Voip account Username instead of my phone number.Confused

Many thanks to all members for their time spent for my issue.



DD-WRT VOIP 7TH.jpg
 Description:
 Filesize:  1.27 MB
 Viewed:  1004 Time(s)

DD-WRT VOIP 7TH.jpg


Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum