New Build - 11/09/2022 - r50841

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Wed Nov 09, 2022 8:56    Post subject: New Build - 11/09/2022 - r50841 Reply with quote
Welcome to Atheros r50841 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50814 (mirror)

OpenVPN 2.5.8: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
mDNS/Avahi dnsmasq zabbix zfs iperf3 freeradius irqbalance unbound mc smartdns OpenSSL radvd Privoxy kernels inadyn
In-kernel Samba (ksmbd 3.4.6): guest behavior is now selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Major update to inadyn: Dynamic DNS client with SSL/TLS support. Please reconfigure also test new DD-WRT beta releases!
SSH keygen/download, OpenVPN server Export Client Configuration features by egc! Import/parse client configs by eibgrad!

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Wed Nov 09, 2022 11:35    Post subject: Reply with quote
Just a little bit ago 'scp firmware.bin' to all three wirelessly from laptop sitting in recliner and they all worky fine.
All have OVPN servers & the openvpn version 2.5.8 does its job okydoky good --- I tested them all Smile

Linksys EA8500 ...main gateway
DD-WRT v3.0-r50841 std (11/09/22)
Linux 4.9.332 #1349 SMP Wed Nov 9 13:48:28 +07 2022 armv7l

#

Netgear WNDR3700 V4
DD-WRT v3.0-r50841 std (11/09/22)
Linux 3.18.140-d6 #157420 Wed Nov 9 04:23:23 -00 2022 mips
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12834
Location: Netherlands

PostPosted: Wed Nov 09, 2022 12:47    Post subject: Reply with quote
Router Model: Netgear R7800

Firmware Version: DD-WRT v3.0-r50841 std (11/09/22)

Upgraded from: DD-WRT v3.0-r50814 std (11/06/22)

Reset: No, not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, port forwarding DDNS, WOL, 2,4GHz, VAP and VLAN for IoT, 5Ghz, (Vanilla Firmware, Disabled Airtime), DDNS (Inadyn) to freedns.afraid.org.
On demand governor with minimum 800 MHz.

Errors: Nothing encountered yet

Thanks BS!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Wed Nov 09, 2022 13:38    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50841 std (11/09/22)
Previous/Reset: DD-WRT v3.0-r50814 std (11/06/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Wed Nov 09, 2022 14:11    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50841) / Linux 4.9.332 #1351 SMP Wed Nov 9 14:36:28 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50814 std (11/06/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
ramblin
DD-WRT User


Joined: 03 Nov 2015
Posts: 316
Location: Florida, USA

PostPosted: Wed Nov 09, 2022 15:25    Post subject: Reply with quote
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50841 std (11/09/22)
Kernel: Linux 4.9.332 #1349 SMP Wed Nov 9 13:48:28 +07 2022 armv7l
Reset: NO ...Upgrade from r50786
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50841 std (11/09/22)
Kernel: Linux 4.9.332 #1349 SMP Wed Nov 9 13:48:28 +07 2022 armv7l
Reset: NO ...Upgrade from r50786
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE

_________________
......All GOOD here... Just Handshakes and Time Stamps !......
asavage
DD-WRT Novice


Joined: 06 Jun 2020
Posts: 22
Location: Oak Harbor, Washington, USA

PostPosted: Wed Nov 09, 2022 16:07    Post subject: Reply with quote
DDNS with multiple hostnames (sites), for DynDNS provider at least, now appears to work correctly. Thanks to several who worked on this, fixing multiple issues.

Perhaps the wiki
https://wiki.dd-wrt.com/wiki/index.php/DDNS_-_How_to_setup_Custom_DDNS_settings_using_embedded_inadyn_-_HOWTO#Configuration

should be updated for In-a-Dyn 2.9.1, to remove reference to the now-defunct "-a" parameter to specify multiple hostnames.

_________________
Regards,
Al Savage
----------------
R7800 x2
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2028

PostPosted: Wed Nov 09, 2022 16:46    Post subject: Reply with quote
Netgear R7800
DD-WRT v3.0-r50841 std (11/09/22)
Linux 4.9.332 #1351 SMP Wed Nov 9 14:36:28 +07 2022 armv7l

CLI firmware.bin upgrade over previous 50813
No Reset

GW,wlan0 disabled, wlan1 AP.
Tunnel oet2 - Proton Free WireGuard client, Destination based routing
Tunnel oet1 - WG server 2 peers
All using SmartDNS
ProFTPD, Entware, Static leases, all working.
Vanilla
on_demand, up_threshold 20
r45727 override

The bug where DDNS was updating every 10 minutes reported at 50755 is fixed at 50841.
Shoutout to @the-joker for his perseverance on this and BS as well.
All Good
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Wed Nov 09, 2022 17:34    Post subject: Reply with quote
asavage wrote:
Perhaps the wiki
https://wiki.dd-wrt.com/wiki/index.php/DDNS_-_How_to_setup_Custom_DDNS_settings_using_embedded_inadyn_-_HOWTO#Configuration

should be updated for In-a-Dyn 2.9.1, to remove reference to the now-defunct "-a" parameter to specify multiple hostnames.


This is volunteer driven updates to wiki. But In any case a great deal more than that needs doing. FYI I cant get the config for dual hostname working freedns side, only tested to see if it worked not when configured via UI as foo.domain.bar foobar.domain.foo errors out

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Wed Nov 09, 2022 17:49    Post subject: Reply with quote
the-joker wrote:
asavage wrote:
Perhaps the wiki
https://wiki.dd-wrt.com/wiki/index.php/DDNS_-_How_to_setup_Custom_DDNS_settings_using_embedded_inadyn_-_HOWTO#Configuration

should be updated for In-a-Dyn 2.9.1, to remove reference to the now-defunct "-a" parameter to specify multiple hostnames.


This is volunteer driven updates to wiki. But In any case a great deal more than that needs doing. FYI I cant get the config for dual hostname working freedns side, only tested to see if it worked not when configured via UI as foo.domain.bar foobar.domain.foo errors out

I concur with the bold quoted text above. To that end, that wiki will get updated when all research is done and the dust settles unless one of the previously listed editors in the history of that wiki does it before I get a round tuit in hand. Please exercise a little patience, thanks. First order of business is to disconnect that redirect page, anyway. It shouldn't exist. The proper wiki link is:

https://wiki.dd-wrt.com/wiki/index.php/Dynamic_DNS

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Wed Nov 09, 2022 18:09    Post subject: Reply with quote
Scratch that I was using wrong provider, the format is correct in UI foo.domain.bar foobar.domain.foo its nice and smooth.

via cli the format is {"foo.domain.bar", "foobar.domain.foo"} which deviates slightly for inadyn documentation, but then its to be expected since there is a DD-WRT ddns layer ontop of inadyn

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Thu Nov 10, 2022 5:18    Post subject: Reply with quote
Home Main Gateway Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r50841 std (11/09/22)
Kernel Version: Linux 4.9.332 #1351 SMP Wed Nov 9 14:36:28 +07 2022 armv7l
Previous/Reset: r50814 / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: WiFi,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6


Home Main AP Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r50841 std (11/09/22)
Kernel Version: Linux 4.9.332 #1351 SMP Wed Nov 9 14:36:28 +07 2022 armv7l
Previous/Reset: r50814 / No Reset, CLI Update
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Static WAN,IPv6-6to4,WiFi Vannilla,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba


All running for over 14 hours.


Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
r7000-2
DD-WRT User


Joined: 23 May 2022
Posts: 61

PostPosted: Thu Nov 10, 2022 9:24    Post subject: Reply with quote
Router/Version: Netgear Nighthawk X10 (R9000)
File/Kernel: r9000-webupgrade.bin / Linux 4.9.332 #653 SMP Mon Nov 7 18:53:29 +07 2022 armv7l
Previous/Reset: r50786 std (11/02/22) / No
Mode/Status: RIP2 router, 2G/5G radio's active
Issues/Errors: None

_________________
Several NetGears with Broadcom and with Atheros
Mode: RIP2 Router, 2G/5G radios are active, Routed WiFi multiple SSID's/separated by IP subnets.
Remote Syslog, NTP, IPv6 management, WireGuard routed Site-2-Site VPNs
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 732

PostPosted: Thu Nov 10, 2022 13:02    Post subject: Reply with quote
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r50841 std (11/09/22)
Kernel: Linux 4.9.332 #1351 SMP Wed Nov 9 14:36:28 +07 2022 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed yesterday, ok.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Thu Nov 10, 2022 13:50    Post subject: Reply with quote
Up and stable for 24 hours, no issues. Thanks, BrainSlayer and Team.
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum