Run command `iptables -nvL` returns empty

Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking
Author Message
passerby2
DD-WRT Novice


Joined: 08 Nov 2022
Posts: 9

PostPosted: Tue Nov 08, 2022 16:44    Post subject: Run command `iptables -nvL` returns empty Reply with quote
I run command 'iptables -nvL' and it returns just a bunch of lines with '--'
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Tue Nov 08, 2022 16:49    Post subject: Reply with quote
You did not state build, router or setup.

But you sure have a problem.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
passerby2
DD-WRT Novice


Joined: 08 Nov 2022
Posts: 9

PostPosted: Tue Nov 08, 2022 17:03    Post subject: Reply with quote
egc wrote:
You did not state build, router or setup.

But you sure have a problem.

Firmware: DD-WRT v3.0-r44715 micro (11/03/20)
Linksys WRT54G2 v1.0

I had a very old v2 firmware and then found out with excitement (many thanks to ddwrt people!) there's v3 beta build, installed without resetting configuration. The router is routing packets ok, so I assume iptables IS working but not able to get it from "Run Command".
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Tue Nov 08, 2022 17:21    Post subject: Reply with quote
You are running an old and outdated build. Latest build is 50814.

Furthermore you better run commands from the command line interface e.g. telnet or putty Smile

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Tue Nov 08, 2022 17:22    Post subject: Reply with quote
Current release is 11-06-2022-r50814

https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2022/11-06-2022-r50814/broadcom/

https://forum.dd-wrt.com/wiki/index.php/Linksys_WRT54G2_v1.0

Also, telnet / ssh is a better option than using the Administration -> Commands tab.

Forum Rules and Guidelines English

Broadcom forum FAQ – README

Advanced Networking forum FAQ – README

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum