Joined: 08 May 2018 Posts: 14242 Location: Texas, USA
Posted: Tue Nov 08, 2022 0:09 Post subject:
I'm not going to look at image size numbers from 41986 to present to see which ones are under the prescribed size to edit the wiki without flash reports of each build. People not reporting flashing this device in the forum are not helping curate information. I was looking for flash reports on this device or other threads that apply and can't seem to find anything except a thread from you back in 2017:
HOME Wired Multicast ISP 4K TV Network Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50814 std (11/05/22)
Kernel Version: Linux 4.4.302-st25 #8186 SMP Sat Nov 5 23:21:41 -00 2022 armv7l
Previous/Reset: r50671 - Good Run / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,CTF,SSH,Syslog
Services Disabled: FA,WiFi,QoS,ttraff,Telnet,NAS,Samba
Running for over 34 hours.
OffSite #1 Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50814 std (11/05/22)
Kernel Version: Linux 4.4.302-st25 #8186 SMP Sat Nov 5 23:21:41 -00 2022 armv7l
Previous/Reset: r50671 - Good Run / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: CTF,DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over 33 hours.
OffSite #2 Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50814 std (11/05/22)
Kernel Version: Linux 4.4.302-st25 #8186 SMP Sat Nov 5 23:21:41 -00 2022 armv7l
Previous/Reset: r50671 - Good Run / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: CTF,DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over an hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
r7000 same problem I have had the last few builds the NTP server variable is not doing anything, I can change it in the web gui and it changes the nvram variable ntp_server but the defaults are still used, no attempt in the log is seen to use the different servers.
Wifi speeds were really good last build but now it won't hold at 866mbit 5ghz and drops to 2.4ghz 200~mbit
Joined: 18 Mar 2014 Posts: 12904 Location: Netherlands
Posted: Tue Nov 08, 2022 14:10 Post subject:
portsup wrote:
r7000 same problem I have had the last few builds the NTP server variable is not doing anything, I can change it in the web gui and it changes the nvram variable ntp_server but the defaults are still used, no attempt in the log is seen to use the different servers.
Wifi speeds were really good last build but now it won't hold at 866mbit 5ghz and drops to 2.4ghz 200~mbit
not an R7000 but it uses the same ntp code , I just set the google time server 216.239.35.4 in the NTP field and this is what syslog is showing:
Code:
Nov 8 15:06:19 E1200v1 daemon.info process_monitor[2711]: Cyclic NTP Update success (servers 216.239.35.4)
Nov 8 15:06:19 E1200v1 daemon.info process_monitor[2711]: Local timer delta is 0
Nov 8 15:06:19 E1200v1 daemon.debug process_monitor[2711]: We need to re-update after 3600 seconds
Nov 8 15:06:19 E1200v1 daemon.info process_monitor[2711]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
Joined: 18 Mar 2014 Posts: 12904 Location: Netherlands
Posted: Tue Nov 08, 2022 15:09 Post subject:
Router Model: Linksys WRT 54 GS v1.0
Firmware Version: DD-WRT v3.0-r50814 mega (11/05/22)
Kernel Version: Linux 2.4.37 #70150 Sat Nov 5 22:34:09 -00 2022 mips
Upgraded: from DD-WRT v3.0-r49113 mega (06/07/22)
Reset: Yes, reset to factory defaults
Status: Up and running for 1 hour, Wireless working, OpenVPN Client does not work, openvpn starts and I can see the process running but then it hangs, syslog:
Code:
Nov 8 16:03:11 WRT54GS user.info syslog: [openvpn] : OpenVPN daemon (Client) starting/restarting...
Nov 8 16:03:12 WRT54GS daemon.warn openvpn[1132]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1132]: Current Parameter Settings:
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1132]: config = '/tmp/openvpncl/openvpn.conf'
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1132]: mode = 0
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1132]: NOTE: --mute triggered...
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1132]: 239 variation(s) on previous 3 message(s) suppressed by --mute
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1132]: OpenVPN 2.5.7 mipsel-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [MH/PKTINFO] [AEAD] built on Nov 5 2022
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1132]: library versions: OpenSSL 1.1.1s 1 Nov 2022, LZO 2.10
Nov 8 16:03:12 WRT54GS user.info syslog: [openvpn] : successfully started
Nov 8 16:03:12 WRT54GS daemon.notice openvpn[1141]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:16
Nov 8 16:03:12 WRT54GS daemon.warn openvpn[1141]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
root@WRT54GS:~#
Errors: OpenVPN does not seem functional, otherwise it runs
r7000 same problem I have had the last few builds the NTP server variable is not doing anything, I can change it in the web gui and it changes the nvram variable ntp_server but the defaults are still used, no attempt in the log is seen to use the different servers.
Wifi speeds were really good last build but now it won't hold at 866mbit 5ghz and drops to 2.4ghz 200~mbit
not an R7000 but it uses the same ntp code , I just set the google time server 216.239.35.4 in the NTP field and this is what syslog is showing:
Code:
Nov 8 15:06:19 E1200v1 daemon.info process_monitor[2711]: Cyclic NTP Update success (servers 216.239.35.4)
Nov 8 15:06:19 E1200v1 daemon.info process_monitor[2711]: Local timer delta is 0
Nov 8 15:06:19 E1200v1 daemon.debug process_monitor[2711]: We need to re-update after 3600 seconds
Nov 8 15:06:19 E1200v1 daemon.info process_monitor[2711]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
So at least on this router it is working
I am not sure if it's an r7000 thing but more likely my config. When I do the same thing I set ntp_server field to an ip it changes the nvram, if use apply it restarts the process but the log still shows the default server list. I have tried either save restart, save apply or apply only and all have the same result. I will try resetup from scratch next.
Here are my ntp nvram setting if you see any problem?
Joined: 16 Nov 2015 Posts: 6445 Location: UK, London, just across the river..
Posted: Tue Nov 08, 2022 22:58 Post subject:
if the nvram value is changed and followed by nvram commit...it will be saved and used/reported...
it will survive restart too..
try settings
nvram set ntp_server=216.239.35.4
nvram commit
reboot
than check the log with
cat /tmp/var/log/messages
do you by any chance use remote loggin via commands...on a usb ?
_________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Check if your nvram is not filled to the max, look at Status/router page
Well other nvram settings became changed with this build. I also had strange repeated wifi disconnects which when reconnected asked for the wifi password again, which I didn't give and still reconnected after a bit lol.
Anyway I am re setting up with the next build, dev is moving fast.
