New Build - 11/06/2022 - r50814

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sun Nov 06, 2022 11:08    Post subject: New Build - 11/06/2022 - r50814 Reply with quote
Welcome to Broadcom r50814 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50786 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
mDNS/Avahi FRR dnsmasq Zabbix zfs iperf3 FreeRADIUS irqbalance Unbound MC SmartDNS OpenSSL kernels inadyn radvd
In-kernel Samba (ksmbd 3.4.6): guest behavior is now selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Major update to inadyn: Dynamic DNS client with SSL/TLS support. Please reconfigure also test new DD-WRT beta releases!
SSH keygen/download, OpenVPN server Export Client Configuration features by egc! Import/parse client configs by eibgrad!

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Sun Nov 06, 2022 12:01    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r50814) / Linux 4.4.302-st25 #8186 SMP Sat Nov 5 23:21:41 -00 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50786 std (11/02/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF + SSH (public key) + DDNS (Dynu.com) + USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Sun Nov 06, 2022 13:31    Post subject: Reply with quote
Netgear R8500
Firmware Version DD-WRT v3.0-r50814 std (11/06/22)
Kernel Version Linux 4.4.302-st25 #8192 SMP Sun Nov 6 00:07:28 -00 2022 armv7l
Current Time Sun, 06 Nov 2022 06:28:12
Uptime 1 min
GUI over 50786
Reset: no
Issues: radvd is not functioning in this build. No IPv6 protocol

Thank you BS & Devs
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

PostPosted: Sun Nov 06, 2022 14:36    Post subject: Reply with quote
Router/Version: Netgear R8000-brcmfmac
File/Kernel: Linux 4.4.302-st25 #8195 SMP Sun Nov 6 00:43:32 -00 2022 armv7l
Previous/Reset: No
Mode/Status: Working - IPv6PD with radvd, NextDNS CLI on jffs2, mactelnet, ssh with 4096 key, wlan0 5745 MHz VHT80, wlan1 2412 MHz HT20
wlan2 5220 MHz HT40, QoS, WG server

Issues/Errors: None
TCB13
DD-WRT User


Joined: 06 Jun 2010
Posts: 260
Location: Portugal

PostPosted: Sun Nov 06, 2022 20:30    Post subject: Reply with quote
RobrPatty wrote:
Netgear R8500
Reset: no
Issues: radvd is not functioning in this build. No IPv6 protocol

Thank you BS & Devs


Anyone else having issues here? Thank you.

Update: Just upgraded my R7000 and radvd is working properly.

_________________
1x Netgear R7800 (latest); 3x Netgear R7000 (latest); 2x Asus RT-N16 (v3.0-r47656); 2x Fonera 2100 (v3.0-r45454).
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Sun Nov 06, 2022 21:22    Post subject: Reply with quote
TCB13 wrote:
RobrPatty wrote:
Netgear R8500
Reset: no
Issues: radvd is not functioning in this build. No IPv6 protocol

Thank you BS & Devs


Anyone else having issues here? Thank you.

Update: Just upgraded my R7000 and radvd is working properly.


You are not having issues with IPv6 not connecting?
TCB13
DD-WRT User


Joined: 06 Jun 2010
Posts: 260
Location: Portugal

PostPosted: Sun Nov 06, 2022 21:24    Post subject: Reply with quote
RobrPatty wrote:
TCB13 wrote:
RobrPatty wrote:
Netgear R8500
Reset: no
Issues: radvd is not functioning in this build. No IPv6 protocol

Thank you BS & Devs


Anyone else having issues here? Thank you.

Update: Just upgraded my R7000 and radvd is working properly.


You are not having issues with IPv6 not connecting?


No. Everything is working fine.

My config:

Code:
interface br0
{
 IgnoreIfMissing on;
 AdvSendAdvert on;
 MinRtrAdvInterval 3;
 MaxRtrAdvInterval 10;
 AdvHomeAgentFlag off;
 AdvManagedFlag off;
 AdvOtherConfigFlag on;
 AdvLinkMTU 1452;
 prefix ::/64
 {
  AdvOnLink on;
  AdvAutonomous on;
  AdvValidLifetime 30;
  AdvPreferredLifetime 20;
 };
};

_________________
1x Netgear R7800 (latest); 3x Netgear R7000 (latest); 2x Asus RT-N16 (v3.0-r47656); 2x Fonera 2100 (v3.0-r45454).
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 289
Location: Maryland, United States

PostPosted: Sun Nov 06, 2022 21:37    Post subject: Reply with quote
IPv6 stopped working for me on the previous build (WAN address but no LAN). I went back to an older build, and it is working. R7000P router.
tuxero
DD-WRT Novice


Joined: 26 Apr 2022
Posts: 5

PostPosted: Sun Nov 06, 2022 21:46    Post subject: Reply with quote
RobrPatty wrote:
Netgear R8500
Firmware Version DD-WRT v3.0-r50814 std (11/06/22)
Kernel Version Linux 4.4.302-st25 #8192 SMP Sun Nov 6 00:07:28 -00 2022 armv7l
Current Time Sun, 06 Nov 2022 06:28:12
Uptime 1 min
GUI over 50786
Reset: no
Issues: radvd is not functioning in this build. No IPv6 protocol

Thank you BS & Devs


In https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1275031#1275031 I described if you leave DNS 1 & 2 entries empty you'll get ipv6 on your lan.
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Mon Nov 07, 2022 0:14    Post subject: Reply with quote
PaulGo wrote:
IPv6 stopped working for me on the previous build (WAN address but no LAN). I went back to an older build, and it is working. R7000P router.


Yep went back to 50595 and works now.
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Mon Nov 07, 2022 0:16    Post subject: Reply with quote
tuxero wrote:
RobrPatty wrote:
Netgear R8500
Firmware Version DD-WRT v3.0-r50814 std (11/06/22)
Kernel Version Linux 4.4.302-st25 #8192 SMP Sun Nov 6 00:07:28 -00 2022 armv7l
Current Time Sun, 06 Nov 2022 06:28:12
Uptime 1 min
GUI over 50786
Reset: no
Issues: radvd is not functioning in this build. No IPv6 protocol

Thank you BS & Devs


In https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1275031#1275031 I described if you leave DNS 1 & 2 entries empty you'll get ipv6 on your lan.


Tried this workaround and no go. egc said BS will be working on the radvd functions. Its fixed on the lastest firmware for R9000. But still needs work on the R8500
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1855
Location: Hung Hom, Hong Kong

PostPosted: Mon Nov 07, 2022 8:51    Post subject: DD-WRT BS build 50814 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r50814 std (11/05/22)
Kernel: Linux 4.4.302-st25 #8190 Sat Nov 5 23:52:25 -00 2022 armv7l
Previous: DD-WRT v3.0-r50786 std (11/02/22)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
  Not 24/7; Using CTF+FA with port-forwarding;
  Not using SFE, STP, IPv6, VPN, VAP;
  USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
  WAN DNS disabled; DDNS (no-ip.com) OK;
  DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
  Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/11-06-2022-r50814/asus-rt-n18u/

Summary

Lazy, lousy testing this time! Nothing strange to report.

After cold boot, Unbound was not loaded. I was not sure whether the failure was just coincidental. Notice that my Unbound was loading a big adblock host list.

Anyway, I went to Setup->Basic Setup->Dynamic Host Configuration Protocol, un-ticked Recursive DNS Resolving (Unbound), Apply, ticked it again, Apply. Then Unbound was loaded at cold boot.

I noticed that there are 2 nvram variables related to Unbound, "custom_configs" was a new one.
Code:
~# nvram show | grep -i -E 'bound|recur' | grep -v grep | grep -v -i "rc_"
size: 34475 bytes (31061 left)
custom_configs=unbound
recursive_dns=1


Update: It really is just an intermittent failure for Unbound loading a huge DNS blacklist during startup.

System Log

Code:
~# grep -i err /var/log/messages
Jan  1 08:00:12 rt-n18u kern.err kernel: [    0.000125] smp_twd: clock not found -2
Jan  1 08:00:12 rt-n18u kern.err kernel: [    2.078580] bcmsflash: found no supported devices
Jan  1 08:00:13 rt-n18u daemon.info mstpd[634]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Jan  1 08:00:13 rt-n18u daemon.info mstpd[634]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 9
Jan  1 08:00:21 rt-n18u local5.err ksmbd: [ksmbd-manager/1068]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Nov  7 15:32:58 rt-n18u kern.err kernel: [   36.442645] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Nov  7 15:33:00 rt-n18u local5.err ksmbd: [ksmbd-manager/1068]: ERROR: WARNING: child process exited abnormally: 1069
Nov  7 15:33:00 rt-n18u local5.err ksmbd: [ksmbd-manager/1068]: ERROR: can't execute kill 1069: No such process
Nov  7 15:33:05 rt-n18u local5.err ksmbd: [ksmbd-manager/2480]: ERROR: Failed to create lock file: File exists

Code:
# iperf3 -c 103.138.xx.xx
Connecting to host 103.138.xx.xx, port 5201
[  5] local 110.235.xx.xx port 44024 connected to 103.138.xx.xx port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  9.65 MBytes  80.9 Mbits/sec   13   65.0 KBytes
[  5]   1.00-2.00   sec  9.25 MBytes  77.6 Mbits/sec    0   77.8 KBytes
[  5]   2.00-3.00   sec  9.08 MBytes  76.1 Mbits/sec    0   79.2 KBytes
[  5]   3.00-4.00   sec  9.24 MBytes  77.5 Mbits/sec    0   79.2 KBytes
[  5]   4.00-5.00   sec  9.21 MBytes  77.2 Mbits/sec    0   79.2 KBytes
[  5]   5.00-6.00   sec  8.97 MBytes  75.2 Mbits/sec    3   94.7 KBytes
[  5]   6.00-7.00   sec  9.22 MBytes  77.3 Mbits/sec    1   91.9 KBytes
[  5]   7.00-8.00   sec  9.20 MBytes  77.2 Mbits/sec    2   93.3 KBytes
[  5]   8.00-9.00   sec  9.38 MBytes  78.7 Mbits/sec    0   94.7 KBytes
[  5]   9.00-10.00  sec  9.35 MBytes  78.5 Mbits/sec    1   94.7 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  92.5 MBytes  77.6 Mbits/sec   20             sender
[  5]   0.00-10.07  sec  92.4 MBytes  77.0 Mbits/sec                  receiver

iperf Done.


_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw


Last edited by mwchang on Wed Nov 09, 2022 7:50; edited 11 times in total
tuxero
DD-WRT Novice


Joined: 26 Apr 2022
Posts: 5

PostPosted: Mon Nov 07, 2022 11:48    Post subject: Reply with quote
RobrPatty wrote:
tuxero wrote:
RobrPatty wrote:
Netgear R8500
Firmware Version DD-WRT v3.0-r50814 std (11/06/22)
Kernel Version Linux 4.4.302-st25 #8192 SMP Sun Nov 6 00:07:28 -00 2022 armv7l
Current Time Sun, 06 Nov 2022 06:28:12
Uptime 1 min
GUI over 50786
Reset: no
Issues: radvd is not functioning in this build. No IPv6 protocol

Thank you BS & Devs


In https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1275031#1275031 I described if you leave DNS 1 & 2 entries empty you'll get ipv6 on your lan.


Tried this workaround and no go. egc said BS will be working on the radvd functions. Its fixed on the lastest firmware for R9000. But still needs work on the R8500


I thought it was a general problem affecting all platforms. This worked in 50786 on a tp-link TL-WDR4300 with mips, atheros.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Mon Nov 07, 2022 12:08    Post subject: Reply with quote
There are users reporting IPv6 is working again: https://svn.dd-wrt.com/ticket/7614#comment:5

I do not use IPv6 so cannot test or troubleshoot Sad

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 235

PostPosted: Mon Nov 07, 2022 22:35    Post subject: Reply with quote
Router/Version: Linksys WRT54GL v1.1
File/Kernel: dd-wrt.v24 mini generic r50814 / Linux 2.4.37 #70142 Sat Nov 5 22:11:02 -00 2022 mips
Previous/Reset: dd-wrt.v24 mini generic r50551 / no
Mode/Status: AP wired and wireless / Up and running for 7 hours
Issues/Errors: Nothing significant

No issues. Thank you BS and gurus
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum