[blkt]

Welcome to Atheros r50595 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50551 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
• mDNS/Avahi dlna Squid jQuery frr dnsmasq kernels Zabbix zfs iperf3 OpenSSL FreeRADIUS irqbalance Unbound SmartDNS
• In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• TL-WR1043N v5 stock factory-to-ddwrt.bin flash and TFTP recovery fixed 50231, add support 50242, 50243, 50244, 50252.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[RobrPatty]

Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r50595 std (10/23/22)
Kernel Version Linux 4.9.330 #651 SMP Tue Oct 4 13:04:30 +07 2022 armv7l
Current Time Sun, 23 Oct 2022 12:22:52
Uptime 2 min
GUI over 50551
Reset: no
Issues: none

Thank you BS & Devs

[mrjcd]

Linksys EA8500 ...main gateway
DD-WRT v3.0-r50595 std (10/23/22)
Linux 4.9.330 #1305 SMP Sat Oct 22 02:08:16 +07 2022 armv7l
scp 'firmware.bin' install over r50593
uptime 6:22 -- all good

#

Netgear WNDR3700 V4
DD-WRT v3.0-r50595 std (10/23/22)
Linux 3.18.140-d6 #156506 Sun Oct 23 20:09:36 +07 2022 mips
scp 'firmware.bin' install over r50593
uptime 6:21 -- all good

[ramblin]

Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50595 std (10/23/22)
Kernel: Linux 4.9.330 #1305 SMP Sat Oct 22 02:08:16 +07 2022 armv7l
Reset: NO ...GUI upgrade from r50551
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50595 std (10/23/22)
Kernel: Linux 4.9.330 #1305 SMP Sat Oct 22 02:08:16 +07 2022 armv7l
Reset: NO ...GUI upgrade from r50551
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE

Happy to report the last 4-5 builds I have not had a single issue on all (3) ea8500s.
These builds are ROCKIN !! Thanks DEVs !!

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50595 std (10/23/22)
Previous/Reset: DD-WRT v3.0-r50551 std (10/19/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50595) / Linux 4.9.330 #1307 SMP Sun Oct 23 14:03:25 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50551 std (10/19/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

[Alozaros]

Router Model Netgear Nighthawk X10
Firmware Version DD-WRT v3.0-r50595 std (10/23/22)
Kernel Version Linux 4.9.330 #651 SMP Tue Oct 4 13:04:30 +07 2022 armv7l

update: CLI r50551 > r50595
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...

Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r50595 std (10/23/22)
Kernel Version Linux 4.9.330 #1307 SMP Sun Oct 23 14:03:25 +07 2022 armv7l

update: CLI r50551 > r50595
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r50595 std (10/23/22)
Kernel Version Linux 3.18.140-d6 #156478 Sun Oct 23 19:03:04 +07 2022 mips

update: CLI/GUI r50551 > r50595
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...but...when flashing CLI it reported 9MB+ ram free but it was not enough...flash went trough unit rebooted and was fully functional...but i re-flashed from GUI, just in case...
Also when I CLI flash 1043v2, i still get this bus error report at the end of the flash...but all reboots normal...
I usually cut of few services that take ram on my 1043v2 so there will be a sufficient amount of ram free...as well i use my /USB to DL the flash file...and call it from there, instead of /tmp

[kalrez]

Looking at the Trac SVN changes, I noticed several areas that have been of topics in the past. But I'm not smart enough know what the changes mean. anyone have any knowledge what these changes will do for performance of fix issues ?

@50571 4 days brainslayer special function for hostnames at ddns
@50570 4 days brainslayer intentional delay
@50569 4 days brainslayer update smartdns
@50568 4 days brainslayer update unbound: remove old files
@50567 4 days brainslayer update unbound: add new files

[grc]

Router/Version: Netgear R7800
Previous/Reset: No

Issues/Errors: 5 ghz unbridged virtual interface (wlan0.1) doesn't come up. Back to r50551 std (10/19/22)

[r7000-2]

Router/Version: Netgear R9000
File/Kernel: r9000-webupgrade.bin / Linux 4.9.330 #651 SMP Tue Oct 4 13:04:30 +07 2022 armv7l
Previous/Reset: r50474 std (10/11/22) / no
Mode/Status: RIP2 router, IPv4/IPv6, ntp, remote syslog / Working
Issues/Errors: None

[tedm]

Router/Version: TP-Link ARCHER-A7 v5
File/Kernel: Linux 3.18.140-d6 #156490 Sun Oct 23 19:29:19 +07 2022 mips
Previous/Reset: No
Mode/Status: Marginal
Issues/Errors: See Description

Previously running a build from October 2021

With this build the router flashes it fine and sets up, I'm able to do a factory reset with the new build with no issues. However, over a 24 hour period the wireless radios start getting more unstable, after 6 hours or so the 5Ghz radio stops advertising it's SSID and working completely, and by 12 hours the 2.4Ghz radio is still advertising but it won't allow any more connections.

Power-cycling restores normal functionality.

Based on posts in another thread I have now set:

Airtime Fairness : Disabled
Disassoc Low Ack : Disabled

In the advanced settings for both wifi bands

In older versions of dd-wrt firmware these settings were not available (I assume they were disabled)

We will see how that goes.

[DWCruiser]

Thank you BS & Team.

Netgear R9000 Nighthawk X10
File: DD-WRT v3.0-r50595 std (10/23/22)
Kernel: Linux 4.9.330 #651 SMP Tue Oct 4 13:04:30 +07 2022 armv7l
Reset: No
Mode & Uptime: Gateway running over 48hrs
Features:
- Gateway & DNSMasq
- Network separation (VLAN) for improved mgt & security
* Private network (vlan1, wlan0, wlan1)
* Guest network (wlan0.1)
* IoT network (wlan1.1)
(VLANS are bridged to avoid conflicts peculiar to R9000)
- 5GHz (AC/N-Mixed); 2.4GHz (NG-Mixed) - both DD-WRT. <<< (stable & no issue in my setup)
- Static, MAC-tied & DHCP allocated IPs
- CloudFare with 'Ignore WAN DNS' option
- OpenVPN Client with PBR for source IPs - P/Forwarding to 2nd router for OpenVPN Server.
- QoS (HFSC/SFC priorities set on MAC, Netmask & Interface)

(Disabled/Not used)
- WLAN2 - 60Ghz
- 10G LAN SFP+

Issues/Errors: Not aware of.

[egc]

[Zyxx]

Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r50595 std (10/23/22) (prev. DD-WRT v3.0-r50551 std (10/19/22))
Kernel: Linux 4.9.330 #1307 SMP Sun Oct 23 14:03:25 +07 2022 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed two days ago, ok.

[tatsuya46]

dont touch ddwrt radio firmware unless on qca988x, for qca99xx its bad. throughput is awful and jittery, latency is jittery, tx rates (to client) are very low..