[blkt]

Welcome to Atheros r50500 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50485 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
• mDNS/Avahi Wiviz MiniDLNA Squid SmartDNS jQuery frr dnsmasq kernels Zabbix zfs iperf3 OpenSSL FreeRADIUS Unbound
• In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• TL-WR1043N v5 stock factory-to-ddwrt.bin flash and TFTP recovery fixed 50231, add support 50242, 50243, 50244, 50252.
• Dongwon DW02-412H supported.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[blkt]

Router/Version: Linksys EA8500 / Box Rev. A00 PCB REV:205(XC) hw_rev=1 hw_ver=XB / r50500 (10/13/22)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.330 #1279 SMP Wed Oct 12 22:07:32 +07 2022
Previous/Reset: r50485 (10/12/22) / No
Mode/Status: AP Gateway / VaNiLLa Mixed 20 MHz Ch 1 & 149 TX Power 30 dBm Short Preamble, ttraff disabled
Issues/Errors: No / No, uptime 8 hours 35 minutes

[Alozaros]

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r50500 std (10/13/22)
Kernel Version Linux 3.18.140-d6 #155600 Thu Oct 13 06:16:36 +07 2022 mips

update: GUI 50485>50500
reset: NO
mode: Gateway
status: Operational 1h+
errors: Nothing new, yet...all running normal..

Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r50500 std (10/13/22)
Kernel Version Linux 4.9.330 #1281 SMP Thu Oct 13 01:35:34 +07 2022 armv7l

update: CLI 50484>50500
reset: NO
mode: Gateway
status: Operational 1h+
errors: Nothing new, yet...all running normal..

[mrjcd]

Linksys EA8500 ...main gateway
DD-WRT v3.0-r50500 std (10/13/22)
Linux 4.9.330 #1279 SMP Wed Oct 12 22:07:32 +07 2022 armv7l

#

Netgear WNDR3700 V4
DD-WRT v3.0-r50500 std (10/13/22)
Linux 3.18.140-d6 #155628 Thu Oct 13 07:20:57 +07 2022 mips

----
all were scp 'firmware.bin' over r50485
worky fine

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50500) / Linux 4.9.330 #1281 SMP Thu Oct 13 01:35:34 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50484 std (10/12/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

[foz111]

Router Model: Netgear R7800 (Main)
Firmware: DD-WRT v3.0-r50500 std (10/13/22)
Kernel Version: Linux 4.9.330 #1281 SMP Thu Oct 13 01:35:34 +07 2022 armv7l

Update: CLI r50357 > r50500
Reset: NO
Mode: Gateway
Status: Operational Minutes
WAN Connection Type: PPPoE
Services Used: DHCP Server, DNSMasq, USB Mount, conf-file=/jffs/dnsmasq.custom - Static Leases, IPv4, OVPN obfuscated Server, 3 x Wireguard Commercial Client VPN's, 1 x VLAN for I-o-T, No Wireless Enabled On This Router, Wireless Mesh System Attached.
DNS: Unbound Pi-Hole
Errors: Cold reboot required after flash to mount USB drive correctly.


---------------------------------------------------------------------------

Router Model: Netgear R7800 (2)
Firmware: DD-WRT v3.0-r50500 std (10/13/22)
Kernel Version: Linux 4.9.330 #1281 SMP Thu Oct 13 01:35:34 +07 2022 armv7l

Update: CLI r50357 > r50500
Reset: NO
Mode: Gateway
Status: Always Flash Router 2 First - 2 Hours
WAN Connection Type: DHCP
Services Used: DNSMasq, IPv4, 2 x Wireguard commercial client VPN's, wlan0 & wlan0.1 VAP
DNS: Unbound Pi-Hole
Errors: Nothing Untoward Showing In Logs


Thank you BS & Devs

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50500 std (10/13/22)
Previous/Reset: DD-WRT v3.0-r50484 std (10/12/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues

[ramblin]

Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50500 std (10/13/22)
Kernel: Linux 4.9.330 #1279 SMP Wed Oct 12 22:07:32 +07 2022 armv7l
Reset: NO ...GUI upgrade from r50474
Errors: Nothing

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50500 std (10/13/22)
Kernel: Linux 4.9.330 #1279 SMP Wed Oct 12 22:07:32 +07 2022 armv7l
Reset: NO ...GUI upgrade from r50474
Errors: Nothing

[RobrPatty]

Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r50500 std (10/13/22)
Kernel Version Linux 4.9.330 #651 SMP Tue Oct 4 13:04:30 +07 2022 armv7l
Current Time Thu, 13 Oct 2022 08:41:19
Uptime 2 min
GUI over 50484
Reset: no
Issues: upgraded fine

Thank you BS & Devs

[alindumitru46]

Router/Version: Linksys EA8500
Firmware: DD-WRT v3.0-r50500 std (10/13/22)
Kernel: Linux 4.9.330 #1279 SMP Wed Oct 12 22:07:32 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using GUI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r50474 std (10/11/22)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, NTP TimeSync,

Easy upgrade, all fine
Thanks.

[grc]

Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r50500 std (10/13/22) / Linux 4.9.330 #1281 SMP Thu Oct 13 01:35:34 +07 2022 armv7l
Previous/Reset: 50313 / no
Issues/Errors: no

nice smooth swiftly GUI experience. thx devs!

[Molle]

Router/Version: Netgear R7800
Previous/Reset: r50313 (CLI update) / No
Status: OK

- 5 GHz (DD-WRT): WDS AP, AC/N-Mixed, VHT80
- 2.4 GHz (DD-WRT): AP, NG-Mixed, Wide HT40
- Features: Gateway, IPv4, DHCP Server, DNSMasq, Static Leases, NTP Client, Ondemand Governor

Router/Version: Linksys EA8500
Previous/Reset: r50313 (CLI update) / No
Status: OK

- 5 GHz (DD-WRT): WDS Station, AC/N-Mixed, VHT80
- 2.4 GHz: disabled
- Features: IPv4, NTP Client, Ondemand Governor

Thanks BS!

[MLandi]

Up and stable for 24 hours, no issues. Thanks, BrainSlayer and Team!

[Per Yngve Berg]

Router Model: Netgear R7800
Firmware Version:DD-WRT v3.0-r50500 std (10/13/22)
Kernel Version: Linux 4.9.330 #1281 SMP Thu Oct 13 01:35:34 +07 2022 armv7l

Status: Working
Issues: Thank you @the-joker. The horizontal scroll bar on the Syslog tab is finally gone. Also no longer need to scroll both vertical scrollbars (inside iframe and parent window).

[DWCruiser]

Thank you BS & Team.

Netgear R9000 Nighthawk X10
File: DD-WRT v3.0-r50500 std (10/13/22)
Kernel: Linux 4.9.330 #651 SMP Tue Oct 4 13:04:30 +07 2022 armv7l
Reset: Yes
Mode & Uptime: Gateway running over 48hrs
Features:
- Gateway & DNSMasq
- Network separation (VLAN) for improved mgt & security
* Private network (vlan1, wlan0, wlan1)
* Guest network (wlan0.1)
* IoT network (wlan1.1)
(VLANS are placed on bridges to avoid conflicts peculiar to R9000)
- 5GHz (AC/N-Mixed); 2.4GHz (NG-Mixed) - both DD-WRT. <<<<
- Static, MAC-tied & DHCP allocated IPs
- CloudFare with 'Ignore WAN DNS' option
- OpenVPN Client with PBR for source IPs - P/Forwarding to 2nd router for OpenVPN Server.
- QoS (HFSC/SFC priorities set on MAC, Netmask & Interface)

(Disabled/Not used)
- WLAN2 - 60Ghz
- 10G LAN SFP+

Issues/Errors: Not aware of.