Author
Message
blkt DD-WRT Guru Joined: 20 Jan 2019 Posts: 5700
Posted: Fri Oct 14, 2022 19:14 Post subject:
If having any problems configuring DD-WRT SSH and WinSCP as described, use HFS instead with Telnet and wget.
It is simple as running HFS , adding a file, Telnet as root "cd /tmp" then wget http://your.pc.ip.address/venom.img
Back to top
Sponsor
Scarface56 DD-WRT Novice Joined: 09 Oct 2022 Posts: 13
Posted: Sun Oct 16, 2022 15:31 Post subject:
bikt thank you very much for the time you dedicated to me, I correct the post because I was able to solve. It is possible to keep both Linksys and DD-WRT firmware?
Thanks again
Back to top
blkt DD-WRT Guru Joined: 20 Jan 2019 Posts: 5700
Posted: Sun Oct 16, 2022 22:05 Post subject:
Possible, not recommended as nvram space is shared. Both partitions read and write settings to the same location.
Boot new firmware? Always perform hard reset, factory defaults or erase any previous environment configurations.
Back to top
Scarface56 DD-WRT Novice Joined: 09 Oct 2022 Posts: 13
Posted: Mon Oct 17, 2022 19:40 Post subject:
Thank you very much for helping me resolve. Hello
Back to top