New Build - 10/01/2022 - r50308

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4580

PostPosted: Sat Oct 01, 2022 4:57    Post subject: New Build - 10/01/2022 - r50308 Reply with quote
Welcome to Atheros r50308 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50274 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
mDNS/Avahi nl ft fs Unbound QoS nDPI Tor ntp EC-SRP Wiviz MiniDLNA Squid SmartDNS jQuery FRR ZFS kernels dnsmasq
In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• TL-WR1043N v5 stock factory-to-ddwrt.bin flash and TFTP recovery fixed 50231, add support 50242, 50243, 50244, 50252.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5945
Location: Texas

PostPosted: Sat Oct 01, 2022 5:18    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r50308 std (10/01/22)
Linux 4.9.329 #1236 SMP Fri Sep 30 12:39:32 +07 2022 armv7l
GUI install over r50291
worky very well
uptime 4:21

other EA8500
scp 'firmware.bin' install over r50291
he's all good
Jovan
DD-WRT User


Joined: 06 Nov 2018
Posts: 120

PostPosted: Sat Oct 01, 2022 6:52    Post subject: Reply with quote
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r50308 (10/01/22)
Kernel Version Linux 3.18.140-d6 #154297 Sat Oct 1 06:29:19 +07 2022 mips

Updated via CLI from r50274
Reset: yes

Working as AP, Mixed, HT40.

Issue: Bad wifi speeds, my Galaxy Tab S6 doesnt reach 300M-HT40 as with previous firmwares, it shows only 144M-HT20. Ookla Speedtest download test is down to 25.2 Mbps (from usual 80-85 Mbps).

Reverting to r50274.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5945
Location: Texas

PostPosted: Sat Oct 01, 2022 7:06    Post subject: Reply with quote
Netgear WNDR3700 V4
DD-WRT v3.0-r50308 std (10/01/22)
Linux 3.18.140-d6 #154339 Sat Oct 1 08:02:22 +07 2022 mips
scp 'firmware.bin' install over r50291
all good
Code:
mrjcd@daDeb:~$ ssh root@citadel-switch.mrjcd.com
DD-WRT v3.0-r50308 std (c) 2022 NewMedia-NET GmbH
Release: 10/01/22
Board: Netgear WNDR3700 V4
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   https://www.dd-wrt.com


==========================================================


BusyBox v1.35.0 (2022-10-01 08:02:50 +07) built-in shell (ash)

root@Citadel-Switch:~# ps
  PID USER       VSZ STAT COMMAND
    1 root      1252 S    /sbin/init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    4 root         0 SW   [kworker/0:0]
    5 root         0 SW<  [kworker/0:0H]
    6 root         0 SW   [kworker/u2:0]
    7 root         0 SW<  [khelper]
    8 root         0 SW<  [netns]
    9 root         0 SW   [kworker/u2:1]
   71 root         0 SW<  [writeback]
   72 root         0 SW<  [crypto]
   75 root         0 SW<  [bioset]
   77 root         0 SW<  [kblockd]
   79 root         0 SW   [kswapd0]
   80 root         0 SW   [kworker/0:1]
  112 root         0 SW   [fsnotify_mark]
  126 root         0 SW<  [deferwq]
  127 root         0 SW   [kworker/u2:2]
  469 root      1020 S    /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
  566 root         0 SW<  [cfg80211]
  569 root         0 SW   [kworker/0:2]
  612 root      1940 S    watchdog
  839 root      1472 S    syslogd -Z -L
  841 root      1472 S    klogd
  938 root      3324 S    /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
 1074 root      1904 S    wland
 1376 root      4536 S    httpd -n -p 80
 1381 root      1556 S    resetbutton
 1788 root       984 S    cron
 1792 root      1940 S    process_monitor
 1806 root      1360 S    dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
 1945 root      1380 R    dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
 1946 root      1480 S    -sh
 1948 root      1480 R    ps
root@Citadel-Switch:~# uptime && date
 02:04:35 up 5 min,  load average: 0.11, 0.19, 0.09
Sat Oct  1 02:04:35 CDT 2022
root@Citadel-Switch:~#
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Sat Oct 01, 2022 7:08    Post subject: Reply with quote
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r50308 std (10/01/22)
Kernel Version Linux 4.9.329 #650 SMP Thu Sep 29 01:33:34 +07 2022 armv7l
Current Time Sat, 01 Oct 2022 01:05:57
Uptime 2 min
GUI over 50274
Reset: no
Issues: upgraded fine

Thank you BS & Devs
grc
DD-WRT User


Joined: 11 Jul 2018
Posts: 115

PostPosted: Sat Oct 01, 2022 7:23    Post subject: Reply with quote
Router/Version: Netgear R7800
File/Kernel: Linux 4.9.329 #1238 SMP Sat Oct 1 01:29:46 +07 2022 armv7l
Previous/Reset: last previous/No
Mode/Status: Running
Issues/Errors: Gui page load has longer latency but running stable without hanging

bad page format on Status/OpenVPN
Jovan
DD-WRT User


Joined: 06 Nov 2018
Posts: 120

PostPosted: Sat Oct 01, 2022 7:33    Post subject: Reply with quote
Jovan wrote:
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r50308 (10/01/22)
Kernel Version Linux 3.18.140-d6 #154297 Sat Oct 1 06:29:19 +07 2022 mips

Updated via CLI from r50274
Reset: yes

Working as AP, Mixed, HT40.

Issue: Bad wifi speeds, my Galaxy Tab S6 doesnt reach 300M-HT40 as with previous firmwares, it shows only 144M-HT20. Ookla Speedtest download test is down to 25.2 Mbps (from usual 80-85 Mbps).

Reverting to r50274.


Reverted to r50274 but no improvement. So maybe is the tablet to blame, it was a system update that intalled a few days ago, maybe that changed something. My main computer reach 300M-HT40, no problem there.
DWCruiser
DD-WRT User


Joined: 15 Aug 2016
Posts: 155
Location: Melbourne, Australia

PostPosted: Sat Oct 01, 2022 12:07    Post subject: Reply with quote
Thank you BS & Team.

Netgear R9000 Nighthawk X10
File: DD-WRT v3.0-r50308 std (10/01/22)
Kernel: Linux 4.9.329 #650 SMP Thu Sep 29 01:33:34 +07 2022 armv7l
Reset: No
Mode & Uptime: Gateway running over 6.30hrs
Features:
- Gateway & DNSMasq
- Network separation (VLAN) for improved mgt & security
* Private network (vlan 1, wlan0, wlan1)
* Guest network (wlan0.1)
* IoT network (wlan1.1)
(However, VLANS are subsumed into bridges to avoid conflicts peculiar to R9000)
- 5GHz (AC/N-Mixed); 2.4GHz (NG-Mixed) - both DD-WRT. <<<<
- Static, MAC-tied & DHCP allocated IPs
- CloudFare with 'Ignore WAN DNS' option
- OpenVPN Client with PBR for source IPs - P/Forwarding to 2nd router for OpenVPN Server.
- QoS (HFSC/SFC priorities set on MAC, Netmask & Interface)

_________________
Life is a journey; travel alone makes it less enjoyable and lonely.

-For setting up VLANS on Netgear R9000, see (at bottom of page): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=322349&postdays=0&postorder=asc&start=60
habeIchVergessen
DD-WRT User


Joined: 04 May 2010
Posts: 425

PostPosted: Sat Oct 01, 2022 13:19    Post subject: Reply with quote
hardware: ea8500
software: 50308/50176 webupgrade

issues:
- no internet connection. ifconfig doesn't list vlan* interfaces. switch config seems to be valid

- back on 48081 (ubootenv + reboot) doesn't connect to internet too. powercycle is required to get internet back

Code:

root@router ~ $ ifconfig
br0       Link encap:Ethernet  HWaddr 58:EF:68:xx:xx:xx
          inet addr:192.168.10.13  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::1/64 Scope:Link
          inet6 addr: fe80::5aef:68ff:fe58:6ef8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7983 errors:0 dropped:3 overruns:0 frame:0
          TX packets:6996 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:962878 (940.3 KiB)  TX bytes:1885108 (1.7 MiB)

brRadius  Link encap:Ethernet  HWaddr 58:EF:68:xx:xx:xx
          inet addr:192.168.20.13  Bcast:192.168.20.255  Mask:255.255.255.0
          inet6 addr: fe80::60fd:9bff:fe02:90e4/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:23020 (22.4 KiB)

eth0      Link encap:Ethernet  HWaddr 58:EF:68:xx:xx:xx
          inet6 addr: fe80::5aef:68ff:fe58:6ef8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:125 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1698 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:15789 (15.4 KiB)  TX bytes:356567 (348.2 KiB)
          Interrupt:101

eth1      Link encap:Ethernet  HWaddr 58:EF:68:xx:xx:xx
          inet6 addr: fe80::5aef:68ff:fe58:6ef8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1263 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2511 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:356688 (348.3 KiB)  TX bytes:505105 (493.2 KiB)
          Interrupt:102

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:179 errors:0 dropped:0 overruns:0 frame:0
          TX packets:179 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:13556 (13.2 KiB)  TX bytes:13556 (13.2 KiB)

wlan0     Link encap:Ethernet  HWaddr 58:EF:68:xx:xx:xx
          inet6 addr: fe80::5aef:68ff:fe58:6efa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:336 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1987 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:52011 (50.7 KiB)  TX bytes:414389 (404.6 KiB)

wlan0.1   Link encap:Ethernet  HWaddr 5A:EF:68:xx:xx:xx
          inet6 addr: fe80::58ef:68ff:fe58:6efa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:24536 (23.9 KiB)

wlan0.2   Link encap:Ethernet  HWaddr 5E:EF:68:xx:xx:xx
          inet6 addr: fe80::5cef:68ff:fe58:6efa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:24428 (23.8 KiB)

wlan1     Link encap:Ethernet  HWaddr 58:EF:68:xx:xx:xx
          inet6 addr: fe80::5aef:68ff:fe58:6efb/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7611 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8863 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1006735 (983.1 KiB)  TX bytes:2514699 (2.3 MiB)


Code:

root@router ~ $ swconfig list
Found: switch0 - gpio-0
root@router ~ $ swconfig dev switch0 show
Global attributes:
        enable_vlan: 0
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        mirror_monitor_port: 0
        mirror_source_port: 0
        disable_all_leds: ???
        arl_age_time: 300
        arl_table: address resolution table
Port 0: MAC 00:05:cd:xx:xx:xx
Port 0: MAC 00:09:52:xx:xx:xx
Port 0: MAC 68:54:5a:xx:xx:xx
Port 0: MAC fc:d4:36:xx:xx:xx
Port 0: MAC 58:b1:0f:xx:xx:xx
Port 0: MAC 58:ef:68:xx:xx:xx
Port 0: MAC 00:90:3e:xx:xx:xx
Port 0: MAC 02:87:09:xx:xx:xx
Port 3: MAC 00:09:52:xx:xx:xx
Port 4: MAC 02:87:09:xx:xx:xx
Port 4: MAC 74:bf:c0:xx:xx:xx
Port 4: MAC 00:05:cd:xx:xx:xx
Port 5: MAC f4:cc:55:xx:xx:xx
Port 5: MAC 00:1d:aa:xx:xx:xx
Port 6: MAC 00:1d:aa:xx:xx:xx
Port 6: MAC 58:b1:0f:xx:xx:xx
Port 6: MAC fc:d4:36:xx:xx:xx
Port 6: MAC f4:cc:55:xx:xx:xx
Port 6: MAC 00:90:3e:xx:xx:xx
Port 6: MAC 58:ef:68:xx:xx:xx
Port 6: MAC 68:54:5a:xx:xx:xx

        igmp_snooping: 0
        igmp_v3: 1
Port 0:
        mib: ???
        enable_eee: ???
        igmp_snooping: 0
        vlan_prio: 0
        pvid: 2
        link: port:0 link:up speed:1000baseT full-duplex
Port 1:
        mib: ???
        enable_eee: 0
        igmp_snooping: 0
        vlan_prio: 0
        pvid: 1
        link: port:1 link:up speed:10baseT full-duplex auto
Port 2:
        mib: ???
        enable_eee: 0
        igmp_snooping: 0
        vlan_prio: 0
        pvid: 1
        link: port:2 link:up speed:10baseT half-duplex auto
Port 3:
        mib: ???
        enable_eee: 0
        igmp_snooping: 0
        vlan_prio: 0
        pvid: 1
        link: port:3 link:up speed:100baseT full-duplex txflow rxflow auto
Port 4:
        mib: ???
        enable_eee: 0
        igmp_snooping: 0
        vlan_prio: 0
        pvid: 1
        link: port:4 link:up speed:1000baseT full-duplex txflow rxflow auto
Port 5:
        mib: ???
        enable_eee: 0
        igmp_snooping: 0
        vlan_prio: 0
        pvid: 2
        link: port:5 link:up speed:1000baseT full-duplex txflow rxflow auto
Port 6:
        mib: ???
        enable_eee: ???
        igmp_snooping: 0
        vlan_prio: 0
        pvid: 1
        link: port:6 link:up speed:1000baseT full-duplex
VLAN 1:
        vid: 1
        ports: 1 2 3 4 6
VLAN 2:
        vid: 2
        ports: 0 5
[/code]
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10747
Location: Netherlands

PostPosted: Sat Oct 01, 2022 13:46    Post subject: Reply with quote
@grc, thanks for reporting

OpenVPN Status page display problem has been confirmed and noted.

Developers are aware and dealing with it Smile

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 645

PostPosted: Sat Oct 01, 2022 13:51    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50308) / Linux 4.9.329 #1238 SMP Sat Oct 1 01:29:46 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50274 std (09/27/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 40MHz, 802.11r (FT), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 List of reference threads, how-tos, and otherwise (Moderator's Pick 🌟)
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10747
Location: Netherlands

PostPosted: Sat Oct 01, 2022 13:56    Post subject: Reply with quote
@habeIchVergessen there are no VLAN interfaces any more since the updated .dts when we switched from one CPU port to two CPU ports.

eth0 is the WAN (vlan2)
eth1 is the LAN (vlan1 with br0 and radio's)

Did you reset to defaults after the switch was made (someone will surely look up with what build that was)

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 803

PostPosted: Sat Oct 01, 2022 14:30    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50308 std (10/01/22)
Previous/Reset: DD-WRT v3.0-r50274 std (09/27/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues

_________________
Netgear R9000 X10
DD-WRT v3.0-r50927 std (11/21/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5945
Location: Texas

PostPosted: Sat Oct 01, 2022 15:13    Post subject: Reply with quote
egc wrote:
@habeIchVergessen there are no VLAN interfaces any more since the updated .dts when we switched from one CPU port to two CPU ports.

eth0 is the WAN (vlan2)
eth1 is the LAN (vlan1 with br0 and radio's)

Did you reset to defaults after the switch was made (someone will surely look up with what build that was)

The EA8500 must be reset for any build after r49838
https://mrjcd.com/EA8500_DD-WRT/vlans/ Twisted Evil
ramblin
DD-WRT User


Joined: 03 Nov 2015
Posts: 238
Location: Florida, USA

PostPosted: Sat Oct 01, 2022 15:40    Post subject: Reply with quote
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50308 std (10/01/22)
Kernel: Linux 4.9.329 #1236 SMP Fri Sep 30 12:39:32 +07 2022 armv7l
Reset: NO .. GUI upgrade from r50274
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50308 std (10/01/22)
Kernel: Linux 4.9.329 #1236 SMP Fri Sep 30 12:39:32 +07 2022 armv7l
Reset: NO .. GUI upgrade from r50274
Errors: NONE

FAST, Easy upgrades .. No issues ..Thanks DEVs !

_________________
......All GOOD here... Just Handshakes and Time Stamps !......
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum