Posted: Sat Sep 10, 2022 15:51 Post subject: New Build - 09/10/2022 - r50146
Welcome to Broadcom r50146 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Netgear R8500
Firmware Version DD-WRT v3.0-r50146 std (09/10/22)
Kernel Version Linux 4.4.302-st25 #7387 SMP Sat Sep 10 15:32:52 +07 2022 armv7l
Current Time Sat, 10 Sep 2022 16:23:07
Uptime 1 min
GUI over 50057
Reset: no
Issues: none
Linksys E2500
DD-WRT v3.0-r50146 mega (09/10/22)
Linux 4.4.302-st25 #18574 Sat Sep 10 16:46:43 +07 2022 mips
GUI install over r49677
'dd-wrt.v24-50146_NEWD-2_K3.x_mega.bin'
Used as a WAP -- all is good
Router/Version: ASUS RT-AC68U rev B1 (AC1900)
File: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.302-st25 #7381 SMP Sat Sep 10 14:44:51 +07 2022 armv7l
Previous/Reset: r50057 / No reset, upgraded via GUI (https)
Mode/Status: Station Bridge
Issues/Errors: No issues; Working as configured
Thank you BS and all of the other devs who help out to make this firmware great. _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Last edited by MysticGold04 on Mon Sep 12, 2022 0:47; edited 1 time in total
Router/Version: Asus RT-AC3100
File: asus_rt-ac3100-firmware.trx
Kernel: Linux 4.4.302-st25 #7386 SMP Sat Sep 10 15:26:03 +07 2022 armv7l
Previous/Reset: r50057 / No reset, upgraded via GUI (https)
Mode/Status: Gateway/AP (separate network, in double NAT)
Issues/Errors: No issues; Working as configured
Thank you BS and all of the other devs who help out to make this firmware great. _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Joined: 18 Mar 2014 Posts: 12915 Location: Netherlands
Posted: Mon Sep 12, 2022 8:39 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r50146M Community Build (09/10/22)
Kernel Version: Linux 4.4.302-st25 #2 SMP Sat Sep 10 13:57:51 CEST 2022 armv7l
Upgraded from: DD-WRT v3.0-r49599M Community Build (07/30/22)
Reset: No not this time
Status: Up and running for 48 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working.
OpenVPN server working.
WireGuard server working with 8 clients (phones, Windows and two other routers for site-to-site setup).
mDNS/Avahi working.
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Mon Sep 12, 2022 11:42 Post subject: DD-WRT BS build 50146 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r50146 std (09/10/22)
Kernel: Linux 4.4.302-st25 #7385 Sat Sep 10 15:15:06 +07 2022 armv7l
Previous: DD-WRT v3.0-r50057 std (09/03/22)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working {
Not 24/7; Not using IPv6, VAP, VPN, CTF, FA;
DDNS (no-ip.com) OK; SFE + Port-forwarding OK;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
Recursive DNS Unbound(need restart by USB script);
Entware core (CPU: armv71) installed without problem
}
Reset: NO reset during firmware upgrade
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/09-10-2022-r50146/asus-rt-n18u/
Firmware: v3.0-r50146 std (09/10/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st25 #7381 SMP Sat Sep 10 14:44:51 +07 2022 armv7l
Previous: v3.0-r49866 std (08/24/22)
Mode/Status: AP wired and wireless / Up and running for 1.5 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 47.0 °C / WL1 52.0 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7