New Build - 09/03/2022 - r50057

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4585

PostPosted: Sat Sep 03, 2022 4:50    Post subject: New Build - 09/03/2022 - r50057 Reply with quote
Welcome to Broadcom r50057 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50012 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
mDNS/Avahi DoTR php Asterisk OpenSSL frr mac80211 SmartDNS ZFS Squid dnsmasq nl80211 nDPI .11r FS Unbound QoS
In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 647

PostPosted: Sat Sep 03, 2022 6:23    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r50057) / Linux 4.4.302-st25 #7235 SMP Sat Sep 3 03:18:42 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50012 std (08/31/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF + DDNS (Dynu) + USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 List of reference threads, how-tos, and otherwise (Moderator's Pick 🌟)
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10788
Location: Netherlands

PostPosted: Sat Sep 03, 2022 7:54    Post subject: Reply with quote
Router Model: Linksys E1200 v1.0

Firmware Version: DD-WRT v3.0-r50057 mini (09/03/22)
Kernel Version: Linux 2.6.24.111 #28494 Sat Sep 3 02:18:06 +07 2022 mips

Upgraded: from DD-WRT v3.0-r49866 mini (08/24/22)
Reset: Yes, reset to factory defaults

Configuration: Setup as Gateway, 2,4 GHz working.

Status: Working for 2 hours

Errors: Nothing encountered yet

Thanks BS!

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5379
Location: UK, London, just across the river..

PostPosted: Sat Sep 03, 2022 8:16    Post subject: Reply with quote
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r50057 std (09/03/22)
Kernel Version Linux 4.4.302-st25 #7235 SMP Sat Sep 3 03:18:42 +07 2022 armv7l

update: CLI r50012 > r50057
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...Thanks Dev's !

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 50500 WAP
TP-Link WR1043NDv2 -DD-WRT 50841 Gateway,DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 50841 Gateway,DNS,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.13.0 AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 50963 Gateway,DNS,AD-Block,AP&Net Isolation,VLAN's,Firewall,DoT,Vanilla
Netgear R9000 --DD-WRT 50927 Gateway,DNS,AD-Block,AP Isolation,Firewall,Forced DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 50927 Gateway,DNS,AD-Block,Firewall,Forced DNS,VLAN's,DoT,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 200
Location: North America

PostPosted: Sat Sep 03, 2022 11:46    Post subject: Reply with quote
Router Model: Netgear R7000P
Operating Mode/Setup: Gateway / 5 GHz AP VAP | Unbound USB

Unbound unable to read /jffs/etc/unbound/root.key

had to revert to previous public beta
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1287
Location: Hung Hom, Hong Kong

PostPosted: Sat Sep 03, 2022 12:22    Post subject: Reply with quote
itwontbewe wrote:
Router Model: Netgear R7000P
Operating Mode/Setup: Gateway / 5 GHz AP VAP | Unbound USB

Unbound unable to read /jffs/etc/unbound/root.key

had to revert to previous public beta

You might need to power off then on the router after firmware upgrade.

I think DD-WRT build 50057 was not detecting /jffs/etc/ properly when starting Unbound a.k.a. recursive_dns. It got no problem picking up /jffs/etc/minidlna.conf and /jffs/etc/lighttpd.conf. I suspect they were possibly using different methods to detect /jffs, especially when /jffs was not JFFS2 but an external USB drive.

It'll better if DD-WRT just copies and uses the startup method of MiniDLNA to load Unbound.


_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper!
May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6575
Location: Romerike, Norway

PostPosted: Sat Sep 03, 2022 12:49    Post subject: Reply with quote
Router/Version: Asus RT-AC66U
File/Kernel: Linux 4.4.302-st25 #18416 Sat Sep 3 04:41:09 +07 2022 mips
Previous/Reset: 49934, no reset
Mode/Status: Working
Issues/Errors: None
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 152

PostPosted: Sat Sep 03, 2022 13:57    Post subject: Reply with quote
Netgear R6700 v3 – Station Bridge? - Slave
Firmware Version: DD-WRT v3.0-r50057 std (09/03/22)
Kernel Version: Linux 4.4.302-st25 #7235 SMP Sat Sep 3 03:18:42 +07 2022 armv7l
Temperatures: CPU 71.4 °C / WL1 55.5 °C
Current Time: Sat, 03 Sep 2022 06:55:45
Uptime: 5:28
Reset: No
CL install over r49866

No issues

Thank you BS and gurus.

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 278

PostPosted: Sat Sep 03, 2022 14:17    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r50057 std (09/03/22)
Kernel: Linux 4.4.302-st25 #7235 SMP Sat Sep 3 03:18:42 +07 2022 armv7l
Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info.
Reset: Nope.
Previous: 08-31-2022-r50012
Status: Working so far, still testing. There is something screwy with the wl driver and older clients. There is a performance issue with anyone using a PCI\VEN_14E4&DEV_43B1
based chip.

wl: 14E4:4360
Temperatures: CPU 67.5 °C / WL0 54.0 °C / WL1 55.3 °C
Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.



Logs.txt
 Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!

nvram set console_debug=1

cat /var/log/messages (Initial Flash)
dmesg (Initial Flash)
cat /proc/cpuinfo
cat /tmp/dnsmasq.conf
cat /tmp/DNSCache.log
cat /tmp/unbound

Download
 Filename:  Logs.txt
 Filesize:  254.16 KB
 Downloaded:  25 Time(s)

itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 200
Location: North America

PostPosted: Sat Sep 03, 2022 14:53    Post subject: Reply with quote
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r50057 std (09/03/22)
Kernel Version: Linux 4.4.302-st25 #7241 SMP Sat Sep 3 04:05:02 +07 2022 armv7l
Reset: no
Operating Mode/Setup: Gateway / 5 GHz AP VAP | Unbound USB
Status: running well. thanks BS and DD-WRT community

*
initially i got these errors
Code:
Sep  3 10:40:35 router user.info : [unbound] : daemon successfully stopped
Sep  3 10:40:37 router user.info : [unbound] : successfully started
Sep  3 10:40:39 router daemon.notice unbound: [2851:0] notice: init module 0: validator
Sep  3 10:40:39 router daemon.err unbound: [2851:0] error: unable to open /unbound/root.key for reading: No such file or directory
Sep  3 10:40:39 router daemon.err unbound: [2851:0] error: error reading auto-trust-anchor-file: /jffs/etc/unbound/root.key
Sep  3 10:40:39 router daemon.err unbound: [2851:0] error: validator: error in trustanchors config
Sep  3 10:40:39 router daemon.err unbound: [2851:0] error: validator: could not apply configuration settings.
Sep  3 10:40:39 router daemon.err unbound: [2851:0] error: module init for module validator failed
Sep  3 10:40:39 router daemon.crit unbound: [2851:0] fatal error: failed to setup modules

after playing around it would work if i disabled the chroot setting in my conf

typically i used
Code:
chroot: "/jffs/etc"


now i have it disabled
Code:
chroot: ""
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 1770
Location: Germany

PostPosted: Sat Sep 03, 2022 15:30    Post subject: Reply with quote
see: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1271057#1271057
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1569
Location: Belgrade

PostPosted: Sat Sep 03, 2022 16:08    Post subject: Reply with quote
Router/Version: Netgear R8000 using experimental build (brcmfmac driver + iw tool 5.19)
File/Kernel: Linux 4.4.302-st25 #7244 SMP Sat Sep 3 04:24:51 +07 2022 armv7l
Previous/Reset: yes
Mode/Status: Working, using all tri bands 1300+600+1300, IPv6PD+IPv4 dul stack radvd, QoS on ipv4+ipv6 HTB+fq_CoDel, mDNS, mactelnet, NextDNS DOH from jffs, WG server(IPv4),
Issues/Errors: No
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 200
Location: North America

PostPosted: Sat Sep 03, 2022 16:31    Post subject: Reply with quote
ho1Aetoo wrote:
see: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1271057#1271057

weird. that build worked for me

i guess this build broke for me because bs removed the setting
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 1770
Location: Germany

PostPosted: Sat Sep 03, 2022 16:43    Post subject: Reply with quote
Can you please post your current not working config?

I would like to try something.
And of course that's a bit annoying when a fix breaks something else.


Last edited by ho1Aetoo on Sat Sep 03, 2022 16:57; edited 2 times in total
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1845
Location: WCentral Indiana USA

PostPosted: Sat Sep 03, 2022 16:49    Post subject: Reply with quote
R6200V2
BCM47081A0 @800 BCM4360 & BCM43217
DD-WRT v3.0-r50057 std (09/03/22)
Linux 4.4.302-st25 #7235 SMP Sat Sep 3 03:18:42 +07 2022 armv7l

tftp R6250.chk
Previous 49976
No reset
wl0 WLAN Repeater, wl1 AP, wl1.1 unbridged VAP, static leases
Overclocked 880 MHz

wl1 Guest VAP would not connect, Multiple DHCP Server had vanished in GUI.
Readded that and all good.

_________________
Forum Guide Lines (Please read!) --- How to get help the right way----Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum