Joined: 18 Mar 2014 Posts: 12881 Location: Netherlands
Posted: Thu Sep 01, 2022 15:56 Post subject:
MuzzleVelocity wrote:
Linksys EA8500 dd-wrt-webupgrade.bin r50012/Linux 4.9.326 #1181 SMP Mon Aug 29 01:53:59 +07 2022 armv7l previous r46885/ Reset: Yes Mode: entware on ext4 USB, lighttpd, samba /Status: operational Issues/Errors: USB Disk Info is gone!
been a while since i upgraded, so i dont know if this is a recent bug or its been a while. But on the USB tab the Disk-info box only lists Disk-space, nothing else. Among other things, this is where it used to show the UUID of any drives you inserted, which need to be copied up to the "mount partition to /opt" box.
It shows alright on my router, have you tried to refresh browser cache or use another bowser and/or incognito mode
It shows alright on my router, have you tried to refresh browser cache or use another bowser and/or incognito mode
I had tried those, and still no luck. But, I just installed r50012 on my identical "spare" EA5800, put in a freshly formatted ext4 USB stick, and the USB info shows up fine there.
So this must be something screwy with the USB drive i have in the main router.
Router/Version: R9000
File/Kernel: dd-wrt_r9000-webupgrade-r50012.bin
Previous/Reset: dd-wrt_r9000-webupgrade-r49599.bin
Mode/Status: operational
Issues/Errors: I had to roll back to firmware 49599 because I was having issues with DNS.
Last edited by johnnyNobody999 on Fri Sep 02, 2022 16:02; edited 1 time in total
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Fri Sep 02, 2022 9:29 Post subject: New Build - 08/31/2022 - r50012
Router/Version: Tp-Link TL-WDR3600 v 1.5
Kernel: Linux 3.10.108-d11 #115598 Wed Aug 31 03:52:41 +07 2022 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq, firewall
Status: Working
Issues: Nothing significant
Uptime: almost 48h
Device working good. I don't see any problems. I have plan to restore factory default soon, cause firmware have many changes at last time. Generic device condition and performance is good.
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r50012 std (08/31/22)
GUI over 49626
Reset: no
For the last few builds, I haven't been able to get freeRADIUS working with my old setup. The logs keep filling with entries about being unable to contact the freeRADIUS server. I haven't yet tried to fully reset and restore manually (Too much work right now) but I was wondering if anyone else has had this issue?
For now, I've restored back to 49626 and everything is working fine.
Linksys EA8500...main gateway
DD-WRT v3.0-r50012 std (08/31/22)
Linux 4.9.326 #1181 SMP Mon Aug 29 01:53:59 +07 2022 armv7l
GUI install over r49838
yea twas a PITA to reconfig it all.
Had to dig in logs to see WTH with ovpn server...Nobody told me after a reset you cannot use the
DH field any longer...yea, Diffie Hellman prolly cussin ya
Everything is working just great now
br1 is isloated from main net but br1 has access to me webserver which is at 10.72.28.1 ...yous can see in firewall
Doing my VLAN twasn't too bad. I just looked at:
sweatbee post:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1119771#1119771 ...link has always been on my VLAN page for yous R7800 peoples but its handy now for us all
Don't know what happen to sweatbee but he had setup a VLAN same as I been using on
his R7800 back in the day --- prolly have to read most of the link but it is all simple
once you get the ol head wrapped around it. Works now on the EA8500
thanky sweatbee where ever yous at...
statrtup cmds:
Code:
swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 vlan 1 set ports "1 2 3 6"
swconfig dev switch0 vlan 4 set ports "4 6t"
swconfig dev switch0 set apply
vconfig add eth1 4
brctl addif br1 eth1.4
ifconfig eth1.4 up
sleep 10
for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n ondemand > $CPUFREQ; done
echo 35 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
me firewall:
Code:
iptables -t nat -I POSTROUTING -o `get_wanface` -j MASQUERADE
iptables -I INPUT -i br1 -m state --state NEW -j DROP
iptables -I INPUT -i br1 -p udp -m multiport --dports 53,67 -j ACCEPT
iptables -I FORWARD -i br1 -o br0 -m state --state NEW -j DROP
iptables -I FORWARD -i br1 -o br0 -d 10.72.28.1 -m state --state NEW -j ACCEPT
Linksys EA8500...main gateway
DD-WRT v3.0-r50012 std (08/31/22)
Linux 4.9.326 #1181 SMP Mon Aug 29 01:53:59 +07 2022 armv7l
GUI install over r49838
yea twas a PITA to reconfig it all.
Had to dig in logs to see WTH with ovpn server...Nobody told me after a reset you cannot use the
DH field any longer...yea, Diffie Hellman prolly cussin ya
just to note:
when I did cat /tmp/var/log/messages | grep openvpn
it told me it could NOT find dh.pem in /tmp/openvpn/ ...therefore it would NOT start
but it twas there just like it is now cause I checked then
Code:
root@Citadel-Station-Homeworld:~# cd /tmp/openvpn
root@Citadel-Station-Homeworld:/tmp/openvpn# ls
ca.crt cert.pem cldiscon.sh ip-pool openvpn.conf route-up.sh
ccd clcon.sh dh.pem key.pem route-down.sh
root@Citadel-Station-Homeworld:/tmp/openvpn#
after reading several posts in a few DD-WRT forums about things NOT starting up as they should...
...that is likely the case here. Alls I know when I Enabled ECDH it all worked fine then and
yea I done a reboot and everything just make sure all was good.
It is in as main router now with newer build so can't monkey with it now...just gonna mention---end note
Joined: 18 Mar 2014 Posts: 12881 Location: Netherlands
Posted: Sun Sep 04, 2022 10:09 Post subject:
I dug up an old DH.PEM certificate and did a quick test and it seems to work fine also after a reboot.
I can trigger the error:
Sep 4 11:56:40 EA8500 daemon.err openvpn[2783]: Cannot load DH parameters from /tmp/openvpn/dh.pem
Sep 4 11:56:40 EA8500 daemon.notice openvpn[2783]: Exiting due to fatal error
if I put in a wrong certificate or did not copy the whole certificate so maybe that is what happened?
