[blkt]

Welcome to Broadcom r49976 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49934 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
• mDNS/Avahi irqbl Tor DoT Redirect PHP Asterisk OpenSSL FRR mac80211 Unbound SmartDNS ZFS Squid dnsmasq nl80211
• In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[G29]

How/where does one find the change-log-deltas from one build to the next ?

Thanks much.

[blkt]

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r49976) / Linux 4.4.302-st25 #7172 SMP Mon Aug 29 02:39:06 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49934 std (08/28/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF + DDNS (Dynu) + USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: Switch config page doesn't look normal, see the screenshot of Jovan. With r49934 was OK

[wabe]

[RobrPatty]

Netgear R8500
Firmware Version DD-WRT v3.0-r49976 std (08/29/22)
Kernel Version Linux 4.4.302-st25 #7178 SMP Mon Aug 29 03:25:51 +07 2022 armv7l
Current Time Mon, 29 Aug 2022 13:46:08
Uptime 0 mi
GUI over 49934
Reset: no
Issues: upgraded fine

Thank you BS & Devs

[egc]

Looking at the Wireless filter I noticed that there is no filter available for my unbridged VAP, which is present on my Atheros routers.

I never looked but is this something specific for Broadcom or is this a bug?

[rlegault]

Router/Version: DLINK DIR885L
File/Kernel: dir885-webflash.bin / 4.4.302-st25 #7177 SMP Mon Aug 29 03:19:08 +07 2022 armv7l DD-WRT
Previous/Reset: DD-WRT v3.0-r47040 std (07/12/21)- WAS WORKING ON THIS BUILD / FULL RESET DONE
Mode/Status: Router / working
Issues/Errors: STATIC LEASES/ appear in GUI and Shell but do nothing

UPDATE
I tried r49934 and it also doesn't work.
I tried r49626 this one works perfectly with Static leases


nvram show | grep static
size: 47270 bytes (18266 left)
static_route=
pppoe_static_ip=
pppoe_static=0
static_route_name=
ppp_static_ip=
static_leasenum=1
ppp_static=0
static_leases=2C:F0:5D:82:BF:E4=RobPCEthernet=192.168.0.69=

[r7000-2]

Router/Version: Netgear 8000
File/Kernel: Linux 4.4.302-st25 #7177 SMP Mon Aug 29 03:19:08 +07 2022 armv7l
Previous/Reset: 08-15-2022-r49741 / no
Mode/Status: RIP2 router, wireguard / works
Issues/Errors: None (not counting "Setup/switch config" view as it will be taken care in next releases)

[bushant]

R6200V2
BCM47081A0 @800 BCM4360 & BCM43217

DD-WRT v3.0-r49909 std (08/27/22)
Linux 4.4.302-st25 #7117 SMP Sat Aug 27 14:33:46 +07 2022 armv7l

tftp R6250.chk
Previous 49909
No reset
Uptime 55 min

wl0 WLAN Repeater, wl1 AP, wl1.1 unbridged VAP, static leases
Overclocked 880 MHz
Temps CPU 160.52 °F / WL0 124.7 °F / WL1 118.94 °F

All good