Posted: Mon Aug 15, 2022 6:05 Post subject: New Build - 08/15/2022 - r49741
Welcome to Broadcom r49741 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Netgear R8500
Firmware Version DD-WRT v3.0-r49741 std (08/15/22)
Kernel Version Linux 4.4.302-st20 #6954 SMP Mon Aug 15 03:03:54 +07 2022 armv7l
Current Time Mon, 15 Aug 2022 01:00:45
Uptime 1 min
GUI over 49681
Reset: no
Issues: none
Router/Version: Linksys WRT54GL v1.1
File/Kernel: dd-wrt.v24 mini generic r49741 / Linux 2.4.37 #69240 Mon Aug 15 01:45:46 +07 2022 mips
Previous/Reset: dd-wrt.v24 mini generic r49547 / yes
Mode/Status: Gateway / Working
Issues/Errors: yes.
Thank you. The firmware was installed without problems and corresponds to its serial number
A new problem has been identified. The router does not work the Internet, neither on Wi-fi nor on the cord. It turned out to go only to the site download1.dd-wrt.com. Youtube and others not working
Router Model/Version: Asus RT-AC66U B1
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r49741 std (08/15/22)
Kernel: Linux 4.4.302-st20 #6948 SMP Mon Aug 15 02:19:32 +07 2022 armv7l
Current Time: Mon, 15 Aug 2022 22:53:45
Temperatures: CPU 47.5 °C / WL0 40.5 °C / WL1 41.0 °C
Previous: DD-WRT v3.0-r49467 std (07/09/22)
Factory Reset: Before the Upgrade
Mode: Gateway/VAP/AP
Uptime: 23 Min
Status: OK
Issues: None
Router/Version: ASUS RT-AC3100
File/Kernel: asus_rt-ac3100-firmware.trx
Previous/Reset: 49677 / No
Mode/Status: Testing as a Gateway / AP
Issues/Errors: None, working as configured. still testing
Services used: DHCP, SSH, Syslog, QoS, AP 2.4 (20Mhz-11), AP 5Ghz (VHT 80-149)
Thank you to BS and the great devs on this board to make this firmware great. _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
@the-joker I don't understand what's broken. DNS servers are disabled. Installed via telnet and web. Erase nvram and reboot. Used several laptops and gadgets. Press CTRL+F5 in the browser. I wanted to update the firmware for micro generic via telnet again from this version, but it does not want to download from the network
You said you returned to build 49547 but that build doesnt exist on servers. At this time Im contemplating zen after these claims.
I have a feeling it might be "r49544", but considering the gap between versions flashed here, that would be pure speculation. Wouldn't be the first time the version number did not match the release number (Atheros r44715 = r44719) <wink><grin>:
KACTET wrote:
Router/Version: Linksys WRT54GL v1.1
File/Kernel: dd-wrt.v24 mini generic r49547 / Linux 2.4.37 #69223 Sat Jul 23 04:50:35 +07 2022 mips
Previous/Reset: dd-wrt.v24 mini generic r49392 / yes
Mode/Status: Gateway / Working
Issues/Errors: yes.
The secret assembly is installed r49547
New Build - 08/03/2022 - r49626 - page 2 _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
@the-joker
Thanks for the codes, I already successfully know them and even used them. The console does not want to download firmware from the network
That's right, it doesn't exist. It is introduced in version r49626, but not due to the wrong order. Builds fail and older images are loaded if the version information doesn't change or the update fails and reverts to a previous good version, which in my case is r49547
Posted: Tue Aug 16, 2022 4:19 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r49741 std (08/15/22) Kernel: Linux 4.4.302-st20 #6948 SMP Mon Aug 15 02:19:32 +07 2022 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, nvram free unused variables script. Previous: 07-09-2022-r49467 Status: Working so far, still testing. wl: 14E4:4360 Temperatures: CPU 69.1 °C / WL0 54.8 °C / WL1 56.1 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: Asus RT-N66U
File: dd-wrt.v24-49741_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r49741 big (08/15/22) (prev. DD-WRT v3.0-r49677 big (08/10/22))
Kernel: Linux 4.4.302-st20 #17960 Mon Aug 15 04:03:20 +07 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed at release, ok.
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Tue Aug 16, 2022 10:19 Post subject:
KACTET wrote:
@the-joker
Thanks for the codes, I already successfully know them and even used them. The console does not want to download firmware from the network
That's right, it doesn't exist. It is introduced in version r49626, but not due to the wrong order. Builds fail and older images are loaded if the version information doesn't change or the update fails and reverts to a previous good version, which in my case is r49547
Your alternative is kicking it in, download the latest build manually and upload to /tmp folder and flash it via cli, its very odd you cant get the file to download, unless the link youre using is bad.