New Build - 08/03/2022 - r49626

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4585

PostPosted: Wed Aug 03, 2022 7:57    Post subject: New Build - 08/03/2022 - r49626 Reply with quote
Welcome to Broadcom r49626 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49599 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
mDNS/Avahi htop snmp NTFS-3G irqbalance Tor DoT Redirect SmartDNS PHP Asterisk OpenSSL ZFS Unbound mac80211 frr
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version:[/b]
[b]File/Kernel:[/b]
[b]Previous/Reset:[/b]
[b]Mode/Status:[/b]
[b]Issues/Errors:[/b]
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10799
Location: Netherlands

PostPosted: Wed Aug 03, 2022 8:20    Post subject: Reply with quote
Router Model: Linksys EA6900 (XVortex CFE)

Firmware Version: DD-WRT v3.0-r49626M Community Build (08/03/22)
Kernel Version: Linux 4.4.302-st20 #1 SMP Wed Aug 3 08:22:08 CEST 2022 armv7l

Upgraded: DD-WRT v3.0-r49492M Community Build (07/15/22) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)

Reset: No not this time.

Configuration: AP, DHCP server, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
Wireguard client running with PBR.
OpenVPN client with PBR running.
NVRAM size 47K (NVRAM size should not be a problem with the Xvortex CFE)

Status: Up and stable for 8 hours

Errors: none so far

Thanks BS!!



Naamloos-ipset.png
 Description:
To come, full ipset integraton with WireGuard
 Filesize:  9.94 KB
 Viewed:  3046 Time(s)

Naamloos-ipset.png



Naamloos-vpn.png
 Description:
To come import OpenVPN client configuration (in collaboration with @eibgrad)
 Filesize:  11.57 KB
 Viewed:  3047 Time(s)

Naamloos-vpn.png



_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 647

PostPosted: Wed Aug 03, 2022 8:37    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r49626) / Linux 4.4.302-st20 #6845 SMP Mon Aug 1 13:26:02 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49599 std (07/30/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + DDNS (Dynu) + USB Storage (guide by egc) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 List of reference threads, how-tos, and otherwise (Moderator's Pick 🌟)
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Wed Aug 03, 2022 15:43    Post subject: Reply with quote
Netgear R8500
Firmware Version DD-WRT v3.0-r49626 std (08/03/22)
Kernel Version Linux 4.4.302-st20 #6851 SMP Wed Aug 3 04:03:45 +07 2022 armv7l
Current Time Wed, 03 Aug 2022 09:40:05
Uptime 0 min
GUI over 49599
Reset: No
Issues: none

Thank you BS & Devs
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 200
Location: Maryland, United States

PostPosted: Wed Aug 03, 2022 18:42    Post subject: Reply with quote
Router/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r49626 std (08/03/22)
Kernel Version: Linux 4.4.302-st20 #6851 SMP Wed Aug 3 04:03:45 +07 2022 armv7l
Previous/Reset: r49567 / no reset
Mode/Status: Gateway / Working
Issues/Errors: none
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 204

PostPosted: Wed Aug 03, 2022 23:56    Post subject: Reply with quote
Netgear R6250
Firmware: DD-WRT v3.0-r49626 std (08/03/22)
Kernel: Linux 4.4.302-st20 #6845 SMP Mon Aug 1 13:26:02 +07 2022 armv7l

Works stable with dnscrypt (ch-blahdns-ipv4), and my AD private blocking refer ahadns.com.
Upgrade via CUI from 49599 without reset.

Free memory 25% 62604 KiB / 253616 KiB
Administration->Commands: (Save Startup)
Sleep 20
/jffs/each_RR.sh

Continued above:

Code:

root@DD-WRT:~# cat /jffs/each_RR.sh
#!/bin/sh
cd /tmp
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/malware.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>Y
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/abuse.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>>Y
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/fraud.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>>Y
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/phishing.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'|sort -u|head -n -1>>Y #Russia
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/ads.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>>Y
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/basic.txt"|sed '/^#/d;/s.youtube.com/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>>Y
# s.youtube.com  # Blocking this will interfere with video watching history
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/redirect.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>>Y #2.8MB
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/drugs.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>>Y
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/ransomware.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>>Y
curl -sS -L --compressed "https://dnsmasq.oisd.nl/" |sed '/address=/!d' >>Y
sort -u Y -o X # total  64.2M downsize to 46.4 @ R6250 only after booting
rm Y
curl -sS -L --compressed "https://dnsmasq.oisd.nl/nsfw/" |sed '/address=/!d'>Y # 6MB
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/tracking.txt"|sed '/^#/d;/google/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>ptracking
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/crypto.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>pcrypto
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/tiktok.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>ptiktok
curl -sS -L --compressed "https://raw.githubusercontent.com/olbat/ut1-blacklists/master/blacklists/dating/domains"|awk '{print "address=/"$1"/#"}'>pdating
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/gambling.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>pgambling
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/piracy.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>piracy
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/scam.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>pscam
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/vaping.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>pvaping
curl -sS -L --compressed "https://raw.githubusercontent.com/blocklistproject/Lists/master/smart-tv.txt"|sed '/^#/d;s/^0.0.0.0 /address=\//g'|awk '{print $1"/#"}'>psmarttv
/jffs/19WiFi24G.sh


Code:

root@DD-WRT:~# cat /jffs/19WiFi24G.sh
#!/bin/sh
logger starting 19WiFi2.4G scripts
killall dnsmasq
grep "conf-file=/tmp/X" /tmp/dnsmasq.conf || echo "conf-file=/tmp/X" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/Y" /tmp/dnsmasq.conf || echo "conf-file=/tmp/Y" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/pcrypto" /tmp/dnsmasq.conf || echo "conf-file=/tmp/pcrypto" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/ptracking" /tmp/dnsmasq.conf || echo "conf-file=/tmp/ptracking" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/ptiktok" /tmp/dnsmasq.conf || echo "conf-file=/tmp/ptiktok" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/pdating" /tmp/dnsmasq.conf || echo "conf-file=/tmp/pdating" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/pgambling" /tmp/dnsmasq.conf || echo "conf-file=/tmp/pgambling" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/piracy" /tmp/dnsmasq.conf || echo "conf-file=/tmp/piracy" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/pscam" /tmp/dnsmasq.conf || echo "conf-file=/tmp/pscam" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/pvaping" /tmp/dnsmasq.conf || echo "conf-file=/tmp/pvaping" >>/tmp/dnsmasq.conf;
grep "conf-file=/tmp/psmarttv" /tmp/dnsmasq.conf || echo "conf-file=/tmp/psmarttv" >>/tmp/dnsmasq.conf;
dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
logger Finish exec 19WiFi2.4G scripts


Because WiFi2.4GHZ will Switch on at 19:00.

Verified on Netgear R6250 over 1 month
marbss
DD-WRT Novice


Joined: 13 Jul 2007
Posts: 25

PostPosted: Sat Aug 06, 2022 11:36    Post subject: Reply with quote
Router/Version: TP-Link Archer c9 v2
File/Kernel: DD-WRT v3.0-r49626 std (08/03/22)/ Linux 4.4.302-st20 #6847 SMP Wed Aug 3 03:15:39 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49599 std (07/30/22) / Yes (too many gremlins left over from previous builds)
Mode/Status: Gateway, OpenVPN server, DDNS, static IPs, access restrictions (block kids wifi at bedtime), QoS, scheduled daily reboots, UPnP, port forwarding, IPv6 with prefix delegation / Up for 20hrs+
Issues/Errors: None to report yet.
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 399
Location: Ottawa, Ontario, Canada

PostPosted: Sat Aug 06, 2022 14:42    Post subject: Reply with quote
Firmware: v3.0-r49626 std (08/03/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302-st20 #6845 SMP Mon Aug 1 13:26:02 +07 2022 armv7l
Previous: v3.0-r49599 std (07/30/22)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 63.0 °C / WL0 47.5 °C / WL1 52.3 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325). Wink

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r50963 std (11/28/22)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 5
PeteSL
DD-WRT User


Joined: 01 May 2007
Posts: 91

PostPosted: Sat Aug 06, 2022 18:40    Post subject: Reply with quote
Router/Version: Asus AC-3100
File/Kernel: asus_rt-ac3100-firmware.trx/Linux 4.4.302-st20 #6850 SMP Wed Aug 3 03:56:41 +07 2022 armv7l
Previous/Reset: r49599/No
Mode/Status: Gateway,NAT,uPNP,AP(2&5),Wiregard site-site client,server supplied DNS&DHCP/Working
Issues/Errors:
I notice that my Samsung S21 (fully up-to-date) is having to reconnect on 5 GHz -sometimes- when the router does an NTP update every hour. There are no errors in the log (last NTP update below).

Code:
Aug 6 13:29:15 wrouter daemon.debug ntpclient[12842]: Connecting to time.nist.gov [132.163.96.1] ...
Aug 6 13:29:15 wrouter daemon.info ntpclient[12842]: Time set from time.nist.gov [132.163.96.1].
Aug 6 13:29:15 wrouter daemon.info process_monitor[2380]: Cyclic NTP Update success (servers time.nist.gov)
Aug 6 13:29:15 wrouter daemon.info process_monitor[2380]: Local timer delta is 0
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2143
Location: All over YOUR webs

PostPosted: Sat Aug 06, 2022 19:13    Post subject: Reply with quote
@PeteSL

Services restart at each NTP update, and this is why you experience what you experience.

This is also why we have now included a way for you to determine the NTP update interval, and you are welcome to change this to any other interval than the default 3600 seconds or hour.

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
PeteSL
DD-WRT User


Joined: 01 May 2007
Posts: 91

PostPosted: Sat Aug 06, 2022 21:04    Post subject: Reply with quote
the-joker wrote:
@PeteSL
Services restart at each NTP update, and this is why you experience what you experience.

Thank you for your reply.

Interesting since there are no syslog entries indicating service restarts, this is a relatively new issue (last couple of months), and does not always cause a reconnect nor do the 2.4GHz devices seem to ever go through a reconnect sequence.

I am not doubting your statement, just commenting on what I am seeing. I don't understand why "services restart at each NTP update" as this seems to me to be needless overhead for keeping hardware in sync, especially since most of the "Delta"s are zero.
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1765
Location: Canada

PostPosted: Sun Aug 07, 2022 7:40    Post subject: Reply with quote
HOME Wired Multicast ISP 4K TV Network
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r49626 std (08/03/22)
Kernel Version: Linux 4.4.302-st20 #6845 SMP Mon Aug 1 13:26:02 +07 2022 armv7l
Previous/Reset: r48971 / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,CTF,SSH,Syslog
Services Disabled: FA,WiFi,QoS,ttraff,Telnet,NAS,Samba

Running for over 72 hours.

OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r49626 std (08/03/22)
Kernel Version: Linux 4.4.302-st20 #6845 SMP Mon Aug 1 13:26:02 +07 2022 armv7l
Previous/Reset: Router Swap / YES
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: CTF,DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Router/Version:E3000
File/Kernel: DD-WRT v3.0-r49626 mega (08/03/22)
Kernel Version: Linux 4.4.302-st20 #17712 Wed Aug 3 05:19:51 +07 2022 mips
Previous/Reset: Router Swap / YES
Mode/Status: Station Bridge & Router Mode / Working Well
Issues/Errors: none / none
Services Used: CTF,NTP,VLANx,BRx,SSH,Syslog,WiFi
Services Disabled: WAN,DHCP,QoS,ttraff,Telnet,USB

Running for over 29 hours.

OffSite #2
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r49626 std (08/03/22)
Kernel Version: Linux 4.4.302-st20 #6845 SMP Mon Aug 1 13:26:02 +07 2022 armv7l
Previous/Reset: Router Swap / Yes
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: CTF,DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running for over 3 hours.

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r50963 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r50963 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r50963 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r50963 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2


Last edited by mac913 on Sun Aug 07, 2022 19:59; edited 2 times in total
nick_name
DD-WRT Novice


Joined: 06 Jan 2022
Posts: 6

PostPosted: Sun Aug 07, 2022 15:27    Post subject: Reply with quote
Router/Version: Asus RT-N18U
File/Kernel: r49626_asus_rt-n18u-firmware.trx / Linux rt-n18u 4.4.302-st20 #6849 Wed Aug 3 03:33:03 +07 2022 armv7l DD-WRT
Previous/Reset: v3.0-r48897 std (05/18/22) / no
Mode/Status: gw, dhcp, usb, ftp, http, cron runing a couple of ash scripts
Issues/Errors: No.
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 152

PostPosted: Sun Aug 07, 2022 21:03    Post subject: Reply with quote
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r49626 std (08/03/22)
Kernel Version: Linux 4.4.302-st20 #6845 SMP Mon Aug 1 13:26:02 +07 2022 armv7l
Temperatures: CPU 72.5 °C / WL1 56.2 °C
Current Time: Sun, 07 Aug 2022 14:01:22
Uptime: 3 days, 20:41
Reset: No
GUI install over r49599
Installed using Brave browser over wireless
No issues

Thank you BS and gurus.

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
WouldRatherBeFOSS
DD-WRT User


Joined: 09 Nov 2019
Posts: 106

PostPosted: Sun Aug 07, 2022 23:41    Post subject: Reply with quote
Router: Asus RT-AC66U
Mode: AP
File: <dd-wrt-49626-Asus_RT-AC66U.trx>.
Kernel: Well, the one included in the build.
Reset: no.
Status: Working.
Previous build: 49544.
Uptime: Two days.
Flashed via: GUI.

Slow speeds for twenty minutes after flashing - which is longer than usual - but good, even excellent speeds now.

_________________
My router: Asus RT-AC66U

Operating systems on devices that I use with that router: GNU-Linux; Windows 10; Android Lollipop
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum