New Build - 07/30/2022 - r49599

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5650

PostPosted: Sat Jul 30, 2022 4:51    Post subject: New Build - 07/30/2022 - r49599 Reply with quote
Welcome to Broadcom r49599 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49567 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
mDNS/Avahi fr htop SNMP NTFS-3G irqbalance Tor DoT Redirect SmartDNS PHP Asterisk OpenSSL ZFS Unbound mac80211
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version:[/b]
[b]File/Kernel:[/b]
[b]Previous/Reset:[/b]
[b]Mode/Status:[/b]
[b]Issues/Errors:[/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6264
Location: Texas

PostPosted: Sat Jul 30, 2022 5:27    Post subject: Reply with quote
Linksys E2500
DD-WRT v3.0-r49599 mega (07/30/22)
Linux 4.4.302-st14 #17676 Sat Jul 30 05:29:32 +07 2022 mips
scp 'firmware.bin' (dd-wrt.v24-49599_NEWD-2_K3.x_mega.bin) install over r49566
Code:
mrjcd@Will-Be-Was:~$ scp firmware.bin root@Volus-E2500.mrjcd.com:/tmp
DD-WRT v3.0-r49566 mega (c) 2022 NewMedia-NET GmbH
Release: 07/26/22
Board: Linksys E2500
firmware.bin                                                              100% 7424KB 833.3KB/s   00:08   
mrjcd@Will-Be-Was:~$
uptime 'bout 17 minutes -- all ok
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 947

PostPosted: Sat Jul 30, 2022 9:10    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r49599) / Linux 4.4.302-st14 #6836 SMP Sat Jul 30 03:31:48 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49567 std (07/27/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + DDNS (Dynu) + USB Storage (guide by egc) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6388
Location: UK, London, just across the river..

PostPosted: Sat Jul 30, 2022 9:16    Post subject: Reply with quote
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r49599 std (07/30/22)
Kernel Version Linux 4.4.302-st14 #6836 SMP Sat Jul 30 03:31:48 +07 2022 armv7l

update via: CLI r49567 > r49599
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55363 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55363 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Sat Jul 30, 2022 13:56    Post subject: Reply with quote
Netgear R8500
Firmware Version DD-WRT v3.0-r49599 std (07/30/22)
Kernel Version Linux 4.4.302-st14 #6842 SMP Sat Jul 30 04:28:35 +07 2022 armv7l
Current Time Sat, 30 Jul 2022 07:53:04
Uptime 1 min
GUI over 49567
Reset: no
Issues: none

Thannk You BS & Devs
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6855
Location: Romerike, Norway

PostPosted: Sat Jul 30, 2022 14:23    Post subject: Reply with quote
Router/Version: Asus RT-AC66U
File/Kernel: Linux 4.4.302-st14 #17656 Sat Jul 30 05:00:37 +07 2022 mips
Previous/Reset: 49544, No reset
Mode/Status: Working
Issues/Errors: None so far
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12812
Location: Netherlands

PostPosted: Sat Jul 30, 2022 15:58    Post subject: Reply with quote
Router Model: Netgear R6400v2, board_id: U12H332T

Firmware Version: DD-WRT v3.0-r49599M Community Build (07/30/22)
Kernel Version: Linux 4.4.302-st14 #1 SMP Sat Jul 30 15:00:58 CEST 2022 armv7l

Upgraded from: DD-WRT v3.0-r49418M Community Build (07/04/22)
Reset: No not this time

Status: Up and running for 6 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working.
OpenVPN client working.
WireGuard client working with 2 tunnels one to Oracle cloud server, one for site-to-site connection.
mDNS/Avahi working.

Errors: Nothing encountered yet

Thanks BS and other developers!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 228

PostPosted: Sat Jul 30, 2022 17:41    Post subject: Reply with quote
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r49599 std (07/30/22)
Kernel Version: Linux 4.4.302-st14 #6836 SMP Sat Jul 30 03:31:48 +07 2022 armv7l
Temperatures: CPU 74.7 °C / WL1 57.3 °C
Current Time: Sat, 30 Jul 2022 10:38:24
Uptime: 12:30
Reset: No
GUI install over r49567
Installed using Brave browser over wireless
No issues

Thank you BS and gurus.

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
turmoil77
DD-WRT Novice


Joined: 06 Jan 2013
Posts: 14

PostPosted: Sat Jul 30, 2022 18:21    Post subject: Reply with quote
Router/Version: Tp-Link Archer C9 v2
File/Kernel: DD-WRT v3.0-r49599 std (07/30/22) / Linux 4.4.302-st14 #6838 SMP Sat Jul 30 04:06:58 +07 2022 armv7l
Previous/Reset: 27-july-2022 (last previous) / No
Mode/Status: gateway, pppoe, ipv4 only, cft/sfe=off, dnsmasq, wl1,wl2=on, port fowarding=on, qos=off, spi firewall=on
Issues/Errors: no errors Smile

Thanks a lot to Brainslayer and all devs Smile Very Happy
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14102
Location: Texas, USA

PostPosted: Sat Jul 30, 2022 20:52    Post subject: Reply with quote
Router Model: R7000P
Firmware Version: DD-WRT v3.0-r49599 std (07/30/22)
Previous: DD-WRT v3.0-r49583 std (07/28/22)
File: netgear-r7000p-webflash.bin
Kernel Version: Linux 4.4.302-st14 #6842 SMP Sat Jul 30 04:28:35 +07 2022 armv7l
Mode: Gateway/AP
Reset: No
Status: OK
Uptime: ~18h
Issues/Errors: None

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Mon Aug 01, 2022 13:20    Post subject: Reply with quote
Firmware: v3.0-r49599 std (07/30/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302-st14 #6836 SMP Sat Jul 30 03:31:48 +07 2022 armv7l
Previous: v3.0-r49567 std (07/27/22)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.9 °C / WL0 47.0 °C / WL1 52.1 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325). Wink

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
PeteSL
DD-WRT User


Joined: 01 May 2007
Posts: 98

PostPosted: Mon Aug 01, 2022 22:50    Post subject: Reply with quote
Router/Version: Asus AC-3100
File/Kernel: asus_rt-ac3100-firmware.trx/Linux 4.4.302-st14 #6841 SMP Sat Jul 30 04:21:54 +07 2022 armv7l
Previous/Reset: r49599/No
Mode/Status: Gateway,NAT,uPNP,AP(2&5),Wiregard site-site client,server supplied DNS&DHCP/Working
Issues/Errors: Nothing new
unregd
DD-WRT Novice


Joined: 02 Aug 2022
Posts: 5

PostPosted: Tue Aug 02, 2022 9:31    Post subject: Reply with quote
I'm new to dd-wrt, only tried the last few betas from july.

Router/Version: TP-Link Archer C9 V1

Upgrading from the stock FW (still) causes a boot loop.
Now r49599 boot loops as well whatever I do.

Steps done:
start from latest, official stock FW 20160517
factory reset
upgrade FW to 07-30-2022-r49599 factory-to-ddwrt.bin (or any other from july)
boot loop
TFTP recovery back to stock 20160517
factory reset
upgrade FW to 11-03-2020-r44715 factory-to-ddwrt.bin (suggested by the router DB)
works
upgrade FW to 07-30-2022-r49599
BOOT LOOP
TFTP recovery back to stock 20160517
upgrade FW to 11-03-2020-r44715 factory-to-ddwrt.bin
works
upgrade FW to 07-27-2022-r49567 archer-c9v1-webflash.bin (one older)
works

Can something be done about this?


Last edited by unregd on Tue Aug 02, 2022 10:39; edited 2 times in total
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12812
Location: Netherlands

PostPosted: Tue Aug 02, 2022 10:15    Post subject: Reply with quote
unregd wrote:
I'm new to dd-wrt, only tried the last few betas from july.

Router/Version: TP-Link Archer C9 V1

Upgrading from the stock FW (still) causes a boot loop.

Steps done:
start from latest, official stock FW 20160517
factory reset
upgrade FW to 07-30-2022-r49599 factory-to-ddwrt.bin (or any other from july)
boot loop
TFTP recovery back to stock 20160517
factory reset
upgrade FW to 11-03-2020-r44715 factory-to-ddwrt.bin (suggested by the router DB)
works
upgrade FW to 07-30-2022-r49599
works

Can something be done about this?


If I understand you correctly flashing from stock via 44715 works?

If so newer builds are probably too large so start with a smaller earlier build and then flash to a recent build

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
unregd
DD-WRT Novice


Joined: 02 Aug 2022
Posts: 5

PostPosted: Tue Aug 02, 2022 10:37    Post subject: Reply with quote
egc wrote:
If I understand you correctly flashing from stock via 44715 works?

If so newer builds are probably too large so start with a smaller earlier build and then flash to a recent build

I see, thanks, but I missed the worst part, I've edited the original post, this new r49599 boot loops, doesn't work at all.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum