Posted: Sat Jul 30, 2022 4:51 Post subject: New Build - 07/30/2022 - r49599
Welcome to Broadcom r49599 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 16 Nov 2015 Posts: 6388 Location: UK, London, just across the river..
Posted: Sat Jul 30, 2022 9:16 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r49599 std (07/30/22)
Kernel Version Linux 4.4.302-st14 #6836 SMP Sat Jul 30 03:31:48 +07 2022 armv7l
update via: CLI r49567 > r49599
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55363 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55363 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Netgear R8500
Firmware Version DD-WRT v3.0-r49599 std (07/30/22)
Kernel Version Linux 4.4.302-st14 #6842 SMP Sat Jul 30 04:28:35 +07 2022 armv7l
Current Time Sat, 30 Jul 2022 07:53:04
Uptime 1 min
GUI over 49567
Reset: no
Issues: none
Joined: 13 Aug 2013 Posts: 6855 Location: Romerike, Norway
Posted: Sat Jul 30, 2022 14:23 Post subject:
Router/Version: Asus RT-AC66U
File/Kernel: Linux 4.4.302-st14 #17656 Sat Jul 30 05:00:37 +07 2022 mips
Previous/Reset: 49544, No reset
Mode/Status: Working
Issues/Errors: None so far
Joined: 18 Mar 2014 Posts: 12812 Location: Netherlands
Posted: Sat Jul 30, 2022 15:58 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r49599M Community Build (07/30/22)
Kernel Version: Linux 4.4.302-st14 #1 SMP Sat Jul 30 15:00:58 CEST 2022 armv7l
Upgraded from: DD-WRT v3.0-r49418M Community Build (07/04/22)
Reset: No not this time
Status: Up and running for 6 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working.
OpenVPN client working.
WireGuard client working with 2 tunnels one to Oracle cloud server, one for site-to-site connection.
mDNS/Avahi working.
Joined: 08 May 2018 Posts: 14102 Location: Texas, USA
Posted: Sat Jul 30, 2022 20:52 Post subject:
Router Model: R7000P
Firmware Version: DD-WRT v3.0-r49599 std (07/30/22)
Previous: DD-WRT v3.0-r49583 std (07/28/22)
File: netgear-r7000p-webflash.bin
Kernel Version: Linux 4.4.302-st14 #6842 SMP Sat Jul 30 04:28:35 +07 2022 armv7l
Mode: Gateway/AP
Reset: No
Status: OK
Uptime: ~18h
Issues/Errors: None _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Firmware: v3.0-r49599 std (07/30/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st14 #6836 SMP Sat Jul 30 03:31:48 +07 2022 armv7l
Previous: v3.0-r49567 std (07/27/22)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.9 °C / WL0 47.0 °C / WL1 52.1 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
I'm new to dd-wrt, only tried the last few betas from july.
Router/Version: TP-Link Archer C9 V1
Upgrading from the stock FW (still) causes a boot loop.
Now r49599 boot loops as well whatever I do.
Steps done:
start from latest, official stock FW 20160517
factory reset
upgrade FW to 07-30-2022-r49599 factory-to-ddwrt.bin (or any other from july)
boot loop
TFTP recovery back to stock 20160517
factory reset
upgrade FW to 11-03-2020-r44715 factory-to-ddwrt.bin (suggested by the router DB)
works
upgrade FW to 07-30-2022-r49599
BOOT LOOP
TFTP recovery back to stock 20160517
upgrade FW to 11-03-2020-r44715 factory-to-ddwrt.bin
works
upgrade FW to 07-27-2022-r49567 archer-c9v1-webflash.bin (one older)
works
Can something be done about this?
Last edited by unregd on Tue Aug 02, 2022 10:39; edited 2 times in total
Joined: 18 Mar 2014 Posts: 12812 Location: Netherlands
Posted: Tue Aug 02, 2022 10:15 Post subject:
unregd wrote:
I'm new to dd-wrt, only tried the last few betas from july.
Router/Version: TP-Link Archer C9 V1
Upgrading from the stock FW (still) causes a boot loop.
Steps done:
start from latest, official stock FW 20160517
factory reset
upgrade FW to 07-30-2022-r49599 factory-to-ddwrt.bin (or any other from july)
boot loop
TFTP recovery back to stock 20160517
factory reset
upgrade FW to 11-03-2020-r44715 factory-to-ddwrt.bin (suggested by the router DB)
works
upgrade FW to 07-30-2022-r49599
works
Can something be done about this?
If I understand you correctly flashing from stock via 44715 works?