Posted: Wed Jul 27, 2022 5:42 Post subject: New Build - 07/27/2022 - r49567
Welcome to Broadcom r49567 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Netgear R8500
Firmware Version DD-WRT v3.0-r49567 std (07/27/22)
Kernel Version Linux 4.4.302-st14 #6818 SMP Wed Jul 27 03:25:57 +07 2022 armv7l
Current Time Wed, 27 Jul 2022 07:00:07
Uptime 2 min
GUI over 49544
Reset: no
Issues: none
Router/Version: ASUS WL-520gC
File/Kernel: micro_olsrd_generic.bin
Previous/Reset: dd-wrt v3.0 r44715
Mode/Status: AP
Issues/Errors: Cannot browse 192.168.1.1 (after update, it is using https protocol, previous build used http), but internet works.
Joined: 01 Dec 2021 Posts: 289 Location: Maryland, United States
Posted: Wed Jul 27, 2022 17:33 Post subject:
outer/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r49567 std (07/27/22)
Kernel Version: Linux 4.4.302-st14 #6818 SMP Wed Jul 27 03:25:57 +07 2022 armv7l
Previous/Reset: r49544 / no reset
Mode/Status: Gateway / Working
Issues/Errors: GUI became unstable after update and any attempted changes to wireless setting caused a loss of GUI. I cleared Firefox browser cache, but that did not help. After a router reboot, GUI returned bet new setting were not implemented and GUI was still unstable. I did a reset and restore using the GUI, but still the GUI is unstable and any changes cause a loss of GUI.
Router/Version: TP-Link Archer C9 V2
File/Kernel: DD-WRT v3.0-r49567 std (07/27/22) | Linux 4.4.302-st14 #6814 SMP Wed Jul 27 03:01:15 +07 2022 armv7l
Previous/Reset: r49467 / No
Mode/Status: gateway, pppoe, wifi 2ghz/5ghz, CTF=Off, SFE=Off
Issues/Errors: Working, very well. But i notice, that my eth0 interface with tag 600 and priority 0, is now showing on Network Configuration as eth0.600. I dont know if is a new feature for organize tagged interfaces or a bug.
Thanks, for all devs, egc, joke, brainslayer and all.
Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Wed Jul 27, 2022 18:33 Post subject:
kavindren wrote:
Router/Version: ASUS WL-520gC
File/Kernel: micro_olsrd_generic.bin
Previous/Reset: dd-wrt v3.0 r44715
Mode/Status: AP
Issues/Errors: Cannot browse 192.168.1.1 (after update, it is using https protocol, previous build used http), but internet works.
the-joker wrote:
@kavindren
HTTPS Web interface access is and has always been optional, by default is and has always been turned off.
kavindren wrote:
I already did Factory default
bushant wrote:
@kavindren Is this your browser defaulting to https?
This is a browser configuration problem. Modern browsers default to https fallback or https only. Check your browser's settings or type in
Router/Version: ASUS WL-520gC
File/Kernel: micro_olsrd_generic.bin
Previous/Reset: dd-wrt v3.0 r44715
Mode/Status: AP
Issues/Errors: Cannot browse 192.168.1.1 (after update, it is using https protocol, previous build used http), but internet works.
the-joker wrote:
@kavindren
HTTPS Web interface access is and has always been optional, by default is and has always been turned off.
kavindren wrote:
I already did Factory default
bushant wrote:
@kavindren Is this your browser defaulting to https?
This is a browser configuration problem. Modern browsers default to https fallback or https only. Check your browser's settings or type in