Posted: Thu Jul 21, 2022 18:19 Post subject: Fully working with multiple devices ArcherA7v5 (05/30/22)
Everyone, this goes against the grain of many of the 'working' settings builds, but living in an environment w 3 distros of unix, Windows, Roku, Chromecast, Androids, and iPhones, this is the ONLY way after countless hours to achieve 300mbps on 5ghz and full connectivity on 2.4ghz.
For some reason this build or the combo of devices DOES NOT LIKE having the 2.4/5 SSID to be the same name. Please copy me and let me know how it works. Note I am not using ANY advanced network features like routing/DLNA/port forwarding/NAT redirection, however I MUST use DNS MASSQ and ignore (of course) ISP WAN DNS. I also use ivpn.net and their amazing anti-tracking and firewall features on Windows, Linux (Kali and Arch), and iOS.
But you need a 3x3 client and the maximum PHY rate is not the maximum possible throughput.
The maximum possible throughput is much lower with ~200Mbit.
Since most good clients have only 2 antennas, the throughput should be even lower.
And you don't need to enter values like 499 or 433 for ACK Timing - because they are not accepted by the radio firmware anyway.
So somehow the shown settings do not fit to your statement - it is technically impossible with such settings and the hardware to achieve a data throughput of over 300MBit.
