[blkt]

Welcome to Marvell r49492 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49467 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
• mDNS/Avahi fr htop SNMP NTFS-3G Unbound irqbalance Tor DoT Redirect OpenSSL SmartDNS PHP ZFS mac80211 Asterisk
• In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
• Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[Zyxx]

Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r49492 std (07/14/22) (prev. DD-WRT v3.0-r49467 std (07/09/22))
Kernel: Linux 4.9.322 #3306 SMP Thu Jul 14 09:22:12 +07 2022 armv7l
Mode: Gateway, SFE enabled, Wifi disabled, Wireguard for external access, WAN to DSL, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning
Reset: No
Status: installed yesterday, ok. Load average 0.00, 0.00, 0.00, Temperatures CPU 77.4 °C / WL0 50.7 °C / WL1 52.3 °C

[Fritzbuf]

Router: Linksys WRT3200ACM
Previous/Reset: r49392/no
Issues/Errors: no/no

Info: the Lan Fault was gone in this version! (see my last Post in "New Build - 07/09/2022 - r49467"!)

- update works good without any problems
- VPN WireGuard
- USB
- DDNS
- CRON "delete directories older > x Days, created by 3xWebCams (stored on128GB SSD)":
e.g. for Cam1: 10 0 * * * root find /tmp/mnt/sda1/Cam1/ -type d -name "20*" -mtime +30 -print0 | xargs -0 rm -r

- Port Forwarding
- FTP
- Samba
- WLAN offline, I use UniFi AP AC LITE as access Point!
- Lan


all OK without error, Thank You for the good work !!!!

best regards

[saphirely]

Linksys WRT1900ACS v1
Firmware:DD-WRT v3.0-r49467 std (07/09/22)
Kernel:Linux 4.9.322 #3300 SMP Sat Jul 9 13:21:02 +07 2022 armv7l

Upgrade via CUI from r49467 without reset

Work stable!

Thank BS team.

[oliver44]

DD-WRT
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r49492 std (07/14/22)
Kernel Version Linux 4.9.322 #3306 SMP Thu Jul 14 09:22:12 +07 2022 armv7
Current Time Fri, 15 Jul 2022 18:00:45
Uptime 16:00

update- browser-waterfox,I switched directly from the first partition from the original software Linksys,
connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation- DHCPv6 Server Daemon Enable Daemon, Router Advertisement Daemon (radvd)Enable Daemon,
Theme - Dracula
Schedule Reboot-on,
Web Access Protocol - HTTPS,
Port Forwarding ok,

adblock - 1.Go to Administration -> Go to Administration -> Commands. paste it in “Run Startup”

wget -qO /tmp/mvps http://winhelp2002.mvps.org/hosts.txt
curl -k https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts https://raw.githubusercontent.com/jerryn70/GoodbyeAds/master/Hosts/GoodbyeAds.txt "^0.0.0.0" >> /tmp/mvps
killall -HUP dnsmasq
stopservice dnsmasq && startservice dnsmasq

2.then in the Additional Dnsmasq options add this: addn-hosts=/tmp/mvps 3.Schedule Reboot tuesday 4.reboot router




Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36,Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N/G, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok

[o2bad455]

Router/Version: Linksys WRT1900ACS v1 / DD-WRT v3.0-r49492 std (07/14/22)
File/Kernel: CLI webflash / Linux 4.9.322 #3306 SMP Thu Jul 14 09:22:12 +07 2022 armv7l
Previous/Reset: r49361 / No
Mode/Status: Gateway, DNSmasq, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3, Radar Detection (DFS), 14 dBm, AutoChannel / Uptime 12:46
Issues/Errors: This ACSv1 5GHz radio sees all channels from 36-161 as confirmed by Status/Wireless/ChannelSurvey. The Wireless/Basic/Advanced ScanList customization doesn't seem to have any effect; but everything else is working great, thank you!

Router/Version: Linksys WRT1900ACS v2 / DD-WRT v3.0-r49492 std (07/14/22)
File/Kernel: CLI webflash / Linux 4.9.322 #3306 SMP Thu Jul 14 09:22:12 +07 2022 armv7l
Previous/Reset: r49361 / No
Mode/Status: Gateway, DNSmasq, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3, Custom ScanList / Uptime 1:23
Issues/Errors: This ACSv2 5GHz radio transmits on all channels 36-161, but cannot receive on channels 52-144 so ChannelSurvey only returns 36-48 and 149-161. The router can still select (manually or AutoChannel) and transmit on channels 52-144 since it doesn't seem to check whether it can actually receive on these channels. Using custom wireless ScanLists doesn't seem to have any effect, so AutoChannel cannot currently be used on the 5 GHz band. GUI results attached (pdf).