Posted: Thu Jul 14, 2022 10:24 Post subject: New Build - 07/14/2022 - r49492
Welcome to Broadcom r49492 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Linksys E1500 File/Kernel: dd-wrt.v24-49492_NEWD-2_K3.x_mega-e1500.bin/Linux 4.4.302-st14 #17352 Thu Jul 14 11:56:17 +07 2022 mips Previous/Reset: no Mode/Status: Router mode, not gateway DHCP DNS AP/ ok for 4 Issues/Errors: no
I see:
directory : /betas/2022/07-14-2022-r49492/netgear-nighthawk-ac2100
directory : /betas/2022/07-14-2022-r49492/netgear-nighthawk-ac2400
no directory for nighthawk-ac1900
have a nice day
I see:
directory : /betas/2022/07-14-2022-r49492/netgear-nighthawk-ac2100
directory : /betas/2022/07-14-2022-r49492/netgear-nighthawk-ac2400
no directory for nighthawk-ac1900
have a nice day
I see:
directory : /betas/2022/07-14-2022-r49492/netgear-nighthawk-ac2100
directory : /betas/2022/07-14-2022-r49492/netgear-nighthawk-ac2400
no directory for nighthawk-ac1900
have a nice day
Firmwares are made but not copied to the public directory, about 130 files are MIA
No problem here, I have mine since a few hours . Good job, and thanks.
Netgear R8500
Firmware Version DD-WRT v3.0-r49492 std (07/14/22)
Kernel Version Linux 4.4.302-st14 #6677 SMP Thu Jul 14 10:43:24 +07 2022 armv7l
Current Time Thu, 14 Jul 2022 09:04:36
Uptime 1 min
GUI over 49467
Reset: no
Issues: good so far
Router/Version: Linksys WRT54G v2.2 File/Kernel: dd-wrt.v24_mini_wrt54g.bin (r49492)/ Linux 2.4.37 #69159 Thu Jul 14 09:17:05 +07 2022 mips
Previous/Reset: DD-WRT v3.0-r49467 mini (07/09/22)/ no
Mode/Status: Gateway, SFE, AP (G only), Static Leases, 300MHz with heatsink / working
Issues/Errors: user.err syslog: Error in FILE /etc/config/base.nvramconfig on line 250, this may lead to strange effects like non working save actions
I'm unable to enable klogd yet (save button has no effect). Is it because klogd is not included in mini version?
Joined: 08 May 2018 Posts: 14244 Location: Texas, USA
Posted: Thu Jul 14, 2022 16:18 Post subject:
In regards to "missing files" on the server - when the upload starts, all the files don't automagically populate all at once. All files noted are present, save and except for the Netgear Nighthawk AC1900. I see no entry for it under the Supported Devices Wiki, and if you go back as far as you have time to research, there's never been a firmware for that device by that nomenclature. Are you sure it's not any of these?
Check the label on the bottom of the router for clues and if it's actually one of the MediaTek devices, there you go. The R6900v1 and R6900P are not officially supported, but I am sure there are threads that discuss how to flash them. These unofficial support methods of changing the board_id are risky and not always advisable, but do what you wish.
Joined: 18 Mar 2014 Posts: 12915 Location: Netherlands
Posted: Thu Jul 14, 2022 17:16 Post subject:
IONK wrote:
Router/Version: Linksys WRT54G v2.2 File/Kernel: dd-wrt.v24_mini_wrt54g.bin (r49492)/ Linux 2.4.37 #69159 Thu Jul 14 09:17:05 +07 2022 mips
Previous/Reset: DD-WRT v3.0-r49467 mini (07/09/22)/ no
Mode/Status: Gateway, SFE, AP (G only), Static Leases, 300MHz with heatsink / working
Issues/Errors: user.err syslog: Error in FILE /etc/config/base.nvramconfig on line 250, this may lead to strange effects like non working save actions
I'm unable to enable klogd yet (save button has no effect). Is it because klogd is not included in mini version?