Posted: Sat Jul 02, 2022 4:12 Post subject: [SOLVED] WG tunnel WAN -> DSL Modem -> Internet routin
Hi. I cannot get a wireguard tunnel working on my dd-wrt router.
My setup is a DSL-632 with the WAN port connected to an ethernet port on my ADSL router (ASUS).
DSL-632 is set to autoconfigure DHCP. Without the wireguard tunnel enabled when I connect to the DSL-632 via WiFi I can see the internet fine.
When I enable the tunnel wireguard it connects - I can see from the log that I get bytes sent and recieved, but connected devices can't access the internet.
I can connect to the remote wireguard server from a client on a PC connected to the DSL-632 when the tunnel is disabled.
Obviously my end goal is to have any device connected to the DSL-632 be routed via the wireguard tunnel for anti-geoblocking reasons!
I'm assuming this is a routing issue? Any suggestions for a setting that might fix the issue?
Main LAN is on 192.168.20.X
ASUS gateway is 192.168.20.1
DSL-632 is taking 192.168.20.34 from DHCP via the WAN port
DSL-632 itself is currently 'stock' aside from the wireguard tunnel config - 192.168.1.1
Please post your applicable configuration information so that we can deduce what the problem could be. Thanks. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio