Multi SSID VLAN with one ssid on default VLAN

Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking
Author Message
samgurung
DD-WRT Novice


Joined: 15 May 2020
Posts: 5

PostPosted: Mon Jun 27, 2022 6:14    Post subject: Multi SSID VLAN with one ssid on default VLAN Reply with quote
I am having a problem setting up multi sssid with VLANS.
I have configued a d-link 882 wifi router as a AP and have two ssids on it.
wlan0 - ddwrt (2.4 ghz)
wlan1 - ddwrt-5 (5ghz)

Virtual ssids: same ssid for 2.4 and 5 ghz
wlan0.1 - homewifi (2.4ghz)
wlan1.1 - homewifi (5Ghz)

I have added a bridge (br1) and a vlan id(20) and have made vlan20 and wlan0.1, wlan1.1 part of the br1 in Setup->networking (please see the attached images) and in Setup->switch config

i am using the wan port as a trunk port and have tagged vlan20, vlan1 (see screen shot).

In my mikrotik router i have set vlan20 with the relevant address (192.168.20.0/24) and dhcp server.

The non vlan ip address range is 192.168.88.0/24 and dhcp server is setup in the bridge interface

When I connect to homewifi my devices get the correct ip address in the 192.168.20.x series However when I try connect to ddwrt or ddwrt-5 the wifi devices do not connect. For the life of me I cannot figure out what I am doing wrong.

I want people conneced to the homewifi to be on vlan20 and those who connect to ddwrt* to be on the default vlan and hence get their ip from the 192.168.88.x series.

Any pointers will be appreciated.
Sponsor
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Mon Jun 27, 2022 13:51    Post subject: Reply with quote
The switch config page only works on Broadcom devices. It would also be a good idea to upgrade to the current release.

EDIT: I completely overlooked the DIR-882 in the OP. MediaTek devices require the use of swconfig utility.

vlan trunking

R7800 vlans guide

PPPoE VLan ID Tagging on WAN (using EA8500)

802.1q VLAN tagging on WAN Port TPLink Archer C7 v5 [SOLVED]

VLAN success on WRT1900ACSv2, WRT3200ACM, et al.

How to VLAN tag WAN traffic for ISP on WRT1900AC v1 - SOLVED

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5


Last edited by dale_gribble39 on Mon Jun 27, 2022 17:44; edited 1 time in total
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Mon Jun 27, 2022 16:54    Post subject: Reply with quote
samgurung wrote:
I have configued a d-link 882 wifi router as a AP and have two ssids on it.

Your DD-WRT version is a bit behind at 48971 I cant remember when the swconfig changes went in, but to be safe http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2022/06-26-2022-r49361/dlink-dir882-a1/

Its the only d-link 882 we have and is a1 revision.

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum