New Build - 06/23/2022 - r49326

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Thu Jun 23, 2022 5:01    Post subject: New Build - 06/23/2022 - r49326 Reply with quote
Welcome to Marvell r49326 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49289 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
mDNS/Avahi SmartDNS FreeRADIUS htop SNMP OpenSSL NTFS-3G Unbound irqbalance Tor ZFS DoT Redirection mac80211
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Thu Jun 23, 2022 6:48    Post subject: Reply with quote
Router Model Linksys WRT1900ACS
Firmware Version DD-WRT v3.0-r49326 std (06/23/22)
Kernel Version Linux 4.9.319 #3286 SMP Thu Jun 23 02:57:55 +07 2022 armv7l


update- browser-waterfox,I switched from pation 1 previous version r49289

connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation-, Schedule Reboot-on

Port Forwarding ok


Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36-Short GI, Short Preamble,Single User Beamforming,Max Associated Clients 50, Radio Scheduling, Enable -WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N/G, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI ,Max Associated Clients50, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES) all-ok

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Thu Jun 23, 2022 20:01    Post subject: Reply with quote
I would like to note the duration of the internet connection after the connection to the router is configured for the first time in PPPoE mode, it takes about a minute and I noticed this in previous versions as well.
Even at some settings such as activating and configuring IPv6 it is not done instantly it takes some time to allocate the IP...

In Openwrt it is done instantly, can be do something about it?

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 252

PostPosted: Sat Jun 25, 2022 5:55    Post subject: Reply with quote
Router/Version: Linksys WRT1900ACS v1 / DD-WRT v3.0-r49326 std (06/23/22)
File/Kernel: CLI webflash / Linux 4.9.319 #3286 SMP Thu Jun 23 02:57:55 +07 2022 armv7l
Previous/Reset: r49289 / No
Mode/Status: Gateway, DNSmasq, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3, Radar Detection (DFS), 14 dBm, AutoChannel / Uptime 2:58
Issues/Errors: Working great, thanks!

Router/Version: Linksys WRT1900ACS v2 / DD-WRT v3.0-r49326 std (06/23/22)
File/Kernel: CLI webflash / Linux 4.9.319 #3286 SMP Thu Jun 23 02:57:55 +07 2022 armv7l
Previous/Reset: r49289 / No
Mode/Status: Gateway, DNSmasq, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3, Custom ScanList / Uptime 2:19
Issues/Errors: Working fine, except the 5 GHz ScanList is still being ignored. This is more of an issue on the ACSv2 than the ACSv1 since, although the ACSv2 thinks it can transmiit on all 5 GHz channels just like the ACSv1 and reports all's well, it can actually communicate with clients on only channels 36-48 and 149-161 (5150-5250 and 5735-5835 GHz). For example, I can improve my chances of getting a usable random channel from 8/24 (33%) to 8/12 (66%) with AutoChannel by switching regions to one with fewer choices, such as United States to Indonesia, but haven't found any way to block the middle channels 52-64 without ScanList which could potentially leave just the 8/8 (100%) channels that are actually usable on the ACSv2. Log attached.

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum