Posted: Sun Jun 19, 2022 14:53 Post subject: New Build - 06/19/2022 - r49268
Welcome to Atheros r49268 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Sun Jun 19, 2022 15:31 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r49268M Community Build by EGC (06/19/22)
Upgraded from: DD-WRT v3.0-r49212M Community Build by EGC (06/16/22)
Reset: No not this time
Status: Up and running for 1 hour, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working
Posted: Sun Jun 19, 2022 15:45 Post subject: R49268
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49268 std (06/19/22)
Kernel Version Linux 4.9.319 #635 SMP Fri Jun 17 15:05:12 +07 2022 armv7l
Current Time Sun, 19 Jun 2022 09:41:33
Uptime 1 min
GUI over 49212
Reset: no
Issues: none
Joined: 03 Nov 2015 Posts: 316 Location: Florida, USA
Posted: Sun Jun 19, 2022 16:27 Post subject:
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r49268 std (06/19/22)
Kernel: Linux 4.9.319 #1030 SMP Sun Jun 19 03:40:42 +07 2022 armv7l
Reset: NO..GUI upgrade from r49212
Errors: None
Router: Linksys ea8500 ..WDS Station
Firmware: DD-WRT v3.0-r49268 std (06/19/22)
Kernel: Linux 4.9.319 #1030 SMP Sun Jun 19 03:40:42 +07 2022 armv7l
Reset: NO..GUI upgrade from r49212
Errors: None
Router: TP Link WR1043ND Ver.2 WDS Station
"older build"
Really haven`t had any issues last few builds. My ea8500 Station is rebooting a few times a day but I believe this is due to my own faulty settings and not having my NTP updating on the station. Thanks everyone !! _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Netgear XR500 - Gateway
Firmware Version: DD-WRT v3.0-r49268 std (06/19/22)
Kernel Version: Linux 4.9.319 #1032 SMP Sun Jun 19 14:38:50 +07 2022 armv7l
Wireless: Vanilla with Airtime Fairness disabled
Temperatures: CPU 57.135 °C / wlan0 60 °C / wlan1 64 °C
Current Time: Sun, 19 Jun 2022 09:54:17
Uptime: 1:08
Reset: No
GUI install over 49212
Running Services: Wireguard client, USB, NAS, mDNS/Avahi
Installed using Brave browser over wireless
No issues
Thank you BS and thanks you gurus for your guides and wisdom _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Joined: 13 Aug 2013 Posts: 6858 Location: Romerike, Norway
Posted: Sun Jun 19, 2022 17:33 Post subject:
Router/Version: Netgear R7800
File/Kernel: Linux 4.9.319 #1032 SMP Sun Jun 19 14:38:50 +07 2022 armv7l
Previous/Reset: 49139, no reset
Mode/Status: Working
Issues/Errors: None
Linksys EA8500main gateway
DD-WRT v3.0-r49268 std (06/19/22)
Linux 4.9.319 #1030 SMP Sun Jun 19 03:40:42 +07 2022 armv7l
GUI install over r49246
ovpn server
samba share 32GB ext4 flash drive
local DNS
unbound
static DHCP leases
ssh key only
VLAN on port4 with WLAN0.1 & WLAN1.1 via br1
all interfaces use unbound including connected to its ovpn server
QOS = HFSC CAKE
all very good
#
other EA8500
GUI install over r49246
switch / ovpn server / samba share x2 ext4 flash drives
all good
#
Netgear WNDR3700 V4
DD-WRT v3.0-r49268 std (06/19/22)
Linux 3.18.140-d6 #146439 Sun Jun 19 19:36:35 +07 2022 mips
GUI install over r49246
switch / ovpn server
all good
#
Netgear WNR2000v3
DD-WRT v3.0-r49268 std (06/19/22)
Linux 3.10.108-d11 #110804 Sun Jun 19 19:43:18 +07 2022 mips
GUI install over r49113
WAP with isolated guest net on br1
all good
So far, so good at 4 hours uptime. I'm thinking about enabling "Airtime Fairness" and seeing what happens. _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Sun Jun 19, 2022 19:59 Post subject:
Router Model: Netgear R7800
Firmware Version DD-WRT v3.0-r49268 std (06/19/22)
Kernel Version Linux 4.9.319 #1032 SMP Sun Jun 19 14:38:50 +07 2022 armv7l
Router Model: TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r49268 std (06/19/22)
Kernel Version Linux 3.18.140-d6 #146411 Sun Jun 19 18:37:39 +07 2022 mips
update: CLI r49212 > r49268
reset: NO
mode: Gateway
status: Operational 4h+
errors: Nothing new, yet...just after flash 1043v2 reported
[flash] : write block [7929856] at [0x00790000]
[flash] : write block [7995392] at [0x007A0000]
[flash] :
done [8060928]
Bus error
soft reboot put it in bootloop or radio reboot no idea but was going on/off+some lights flashing on repeat, cold boot resolved the situation, odd but unit is working as it should...there was enough memory to perform the CLI flash... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Netgear x10 primary wds AP, DNSmasq,DNsCrypt, Inadyn, NTP, SMB, gateway, QOS htb/cake, dot and dns capture
r7800, WDS sta
All good on DDWRT firmaware with airtime fairness disabled.
uptime 7hrs.
has anyne who had problems with vanilla an airtime fairness previoulsy, tested that can report back? Im hesitant to rock the boat again when DDWRT firmare is stable.
Vanilla and airtime fairness have been enabled for a day and 5 hours. Everything okay so far. _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Tue Jun 21, 2022 5:46 Post subject:
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r49268M (06/19/22)
Upgraded from: DD-WRT v3.0-r49212M (06/16/22)
Reset: No, not this time
Status: Up and running for 2 days, basic setup as Gateway, static leases, port forwarding DDNS, WOL 2,4GHz, VAP for IoT, 5Ghz (all Vanilla Firmware no Airtime fairness and No Power Save),