New Build - 06/10/2022 - r49139

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Fri Jun 10, 2022 9:20    Post subject: New Build - 06/10/2022 - r49139 Reply with quote
Welcome to Broadcom r49139 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49113 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
mDNS/Avahi Tor DoT Redirect SmartDNS FreeRADIUS htop rtw88 mt76 ath10k ath5k SNMP OpenSSL NTFS-3G irqbalance
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Fri Jun 10, 2022 10:45    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r49139) / Linux 4.4.302-st14 #6347 SMP Fri Jun 10 01:44:23 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49113 std (06/07/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + DDNS (Dynu) + USB Storage (guide by egc) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Fri Jun 10, 2022 12:30    Post subject: Reply with quote
So that you guys know, Ive been reworking the english strings to fix endless and needless repetition between headers/legends and labels.

So much of how it use to be named is now new and still much to happen in that front, Im not even halfway, services page and wireless pages, info page, backup/restore pages, some help text and pages, access restrictions pages are done, the rest is between changes still.

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2028

PostPosted: Fri Jun 10, 2022 14:02    Post subject: Reply with quote
Netgear R6200v2
DD-WRT v3.0-r49139 std (06/10/22)
Linux 4.4.302-st14 #6347 SMP Fri Jun 10 01:44:23 +07 2022 armv7l

tftp R6250.chk over 49113
No reset
Uptime 3:23

wl0 WLAN Repeater, wl1 AP, wl1.1 unbridged VAP, static leases
root@6200:~# nvram set clkfreq=960,533

All good
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 289
Location: Maryland, United States

PostPosted: Fri Jun 10, 2022 14:51    Post subject: Reply with quote
Router/Version: Netgear R6300v1
Firmware Version: DD-WRT v3.0-r49139 giga (06/10/22)
Kernel Version: Linux 4.4.302-st14 #16648 Fri Jun 10 02:39:13 +07 2022 mips
Previous/Reset: r49113
Mode/Status: Gateway / Working
Issues/Errors: None

With IPv6 enabled, I found that on IPv6 speed test sites using SFE gave the best results.
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 332

PostPosted: Sat Jun 11, 2022 2:18    Post subject: Reply with quote
the-joker wrote:
So that you guys know, Ive been reworking the english strings to fix endless and needless repetition between headers/legends and labels.

So much of how it use to be named is now new and still much to happen in that front, Im not even halfway, services page and wireless pages, info page, backup/restore pages, some help text and pages, access restrictions pages are done, the rest is between changes still.


Sweet! You're awesome Bro! Thanks for all the hard work!
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 332

PostPosted: Sat Jun 11, 2022 2:50    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r49139 std (06/10/22)
Kernel: Linux 4.4.302-st14 #6347 SMP Fri Jun 10 01:44:23 +07 2022 armv7l
Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info.
Reset: Nope.
Previous: 05-26-2022-r48971
Status: Working well so far, still testing.
Temperatures: CPU 68.0 °C / WL0 54.5 °C / WL1 55.6 °C
Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.



Speedtest-1.jpg
 Description:
Speedtest Over 5.8GHz Wireless.
 Filesize:  59.15 KB
 Viewed:  3345 Time(s)

Speedtest-1.jpg



Logs.txt
 Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!

nvram set console_debug=1

cat /var/log/messages (Initial Flash)
dmesg (Initial Flash)
cat /proc/cpuinfo
cat /tmp/dnsmasq.conf
cat /tmp/DNSCache.log
cat /tmp/unbound

Download
 Filename:  Logs.txt
 Filesize:  241.87 KB
 Downloaded:  59 Time(s)

Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

PostPosted: Sat Jun 11, 2022 5:14    Post subject: Reply with quote
Router: Netgear R8000 with experimental brcmfmac driver (full mac driver)
Kernel: Linux 4.4.302-st14 #6355 SMP Fri Jun 10 02:35:11 +07 2022 armv7l
Previous/Reset: No
Mode/Status: Working, IPv6 PD+IPv4 (dual stack), QoS ON (HFSC+CAKE) link 150/15, sfe-ctf-fa OFF, WireGuard server, NextDNS CLIent with DOH from jffs2 + dnsmasq for cacheing, remote logging with papertrailapp, Inspired themes "Dracula" by the-joker, wifi - wlan0 149UU VHT80 1300Mbps, wlan1 6 upper HT40 + QAM256 600Mbps, wlan2 48LL VHT80 1300Mbps (important txpower in GUI must be set at 15dBm but actual goes to 30dBm)
Issues/Errors: sometimes reboots when you hit Apply button but that's not an real issue
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 229

PostPosted: Sat Jun 11, 2022 13:43    Post subject: Reply with quote
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r49139 std (06/10/22)
Kernel Version: Linux 4.4.302-st14 #6347 SMP Fri Jun 10 01:44:23 +07 2022 armv7l
Temperatures: CPU 71.9 °C / WL1 55.5 °C
Current Time: Sat, 11 Jun 2022 06:17:54
Uptime: 13:09
Reset: No
GUI install over 49113
Installed using Brave browser over wireless
No issues

Thank you BS and thanks you gurus for your guides and wisdom

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Sat Jun 11, 2022 20:53    Post subject: Reply with quote
Firmware: v3.0-r49139 std (06/10/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302-st14 #6347 SMP Fri Jun 10 01:44:23 +07 2022 armv7l
Previous: v3.0-r49113 std (06/07/22)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.8 °C / WL1 51.8 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325). Wink

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Sun Jun 12, 2022 13:28    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-49139_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r49139 big (06/10/22) (prev. DD-WRT v3.0-r49081 big (06/04/22))
Kernel: Linux 4.4.302-st14 #16664 Fri Jun 10 03:18:27 +07 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: installed two days ago, ok.

My R7000 is offline, need to have a look onto its hardware first.
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 260
Location: United States

PostPosted: Sun Jun 12, 2022 14:09    Post subject: Reply with quote
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r49139 std (06/10/22)
Kernel Version: Linux 4.4.302-st14 #6353 SMP Fri Jun 10 02:23:52 +07 2022 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP Unbound USB
Status: running well. thanks BS and dd-wrt community
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1855
Location: Hung Hom, Hong Kong

PostPosted: Mon Jun 13, 2022 12:58    Post subject: Reply with quote
the-joker wrote:
So that you guys know, Ive been reworking the english strings to fix endless and needless repetition between headers/legends and labels.

So much of how it use to be named is now new and still much to happen in that front, Im not even halfway, services page and wireless pages, info page, backup/restore pages, some help text and pages, access restrictions pages are done, the rest is between changes still.

Take the chance to find the proper place to escape ">" and "<" using HTML entities when returning results of running shell commands in Admin->Command! Smile

Did you(?) escape the quotation marks? Should be the same place....


_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw
foreverforgotten
DD-WRT Novice


Joined: 16 Jun 2022
Posts: 16
Location: Dallas, TX

PostPosted: Thu Jun 16, 2022 18:44    Post subject: Reply with quote
Firmware: DD-WRT v3.0-r49139 std (06/10/22)
Router/Version: ASUS RT-AC5300
Kernel: 4.4.302-st14 #6352 SMP Fri Jun 10 02:17:17 +07 2022 armv7l DD-WRT
Previous: v3.0-r48996 std (05/30/22)
Mode/Status: Wired and Wireless (1x 2.4 GHz, 2x 5 GHz) as Router (with DHCP), Switch and AP. DNS is offloaded to PiHole.
Uptime: 3.5 days
Reset: No
Temperatures: CPU 64.1 °C / WL0 47.6 °C / WL1 48.8 °C / WL2 52.4 °C
Issues/Errors: Nothing significant

Updated via web interface using .trx file; did not reset settings. Process went smoothly and everything is stable.

Only oddity I've encountered is the WL1 interface is sometimes not visible to random devices for a period of time, resulting in those devices dropping offline for an arbitrary amount of time. This was also observed under the prior version running on the router (r48996) so I suspect it's either a configuration issue on my part or a channel noise/overlapping issue and not a problem with dd-wrt itself. I'm still monitoring and investigating. WL1 is using 40 MHz channel width on channel 40 ( +38 ) vs. WL2 80 MHz width on channel 161 ( +155. ) Both are using 90 for their sensitivity (ACK) range so I may try bumping the value a little higher to see if that helps.
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Thu Jun 16, 2022 21:23    Post subject: Reply with quote
foreverforgotten wrote:
sensitivity (ACK) range so I may try bumping the value a little higher to see if that helps.


Try 1350 for a good read of what works well generally https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327595

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum