Posted: Fri Jun 10, 2022 9:20 Post subject: New Build - 06/10/2022 - r49139
Welcome to Atheros r49139 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Netgear WNDR3700 V4
DD-WRT v3.0-r49139 std (06/10/22)
Linux 3.18.140-d6 #145560 Fri Jun 10 06:17:57 +07 2022 mips
scp 'firmware.bin' over r49113
up ---> 8:02
all good --- the old dog's samba & its radios still good...on its 5GHz now
#
Linksys EA8500 ...gateway
DD-WRT v3.0-r49139 std (06/10/22)
Linux 4.9.317 #1012 SMP Fri Jun 10 01:02:25 +07 2022 armv7l
GUI install over r49113
she worky very well
Joined: 16 Nov 2015 Posts: 6185 Location: UK, London, just across the river..
Posted: Fri Jun 10, 2022 12:24 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r49139 std (06/10/22)
Kernel Version Linux 4.9.317 #1014 SMP Fri Jun 10 13:24:44 +07 2022 armv7l
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r49139 std (06/10/22)
Kernel Version Linux 3.18.140-d6 #145532 Fri Jun 10 05:18:29 +07 2022 mips
on 1043v2 using pale-moon browser (private mode), all GUI pages loading/behaving as normal..
update: CLI r49113 > r49139
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...al'worky, worky
p.s. for some reason things in custom script are executed x2 (visible via htop) but it could be couse usb script is executed x2 as things trigger the custom script from there.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 53045 WAP
TP-Link WR1043NDv2 -DD-WRT 54420 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall,VPN,x1VLAN
TP-Link WR1043NDv2 -DD-WRT 54475 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 54475 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 54475 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 54475 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Fri Jun 10, 2022 12:47; edited 1 time in total
Posted: Fri Jun 10, 2022 13:22 Post subject: R49139
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49139 std (06/10/22)
Kernel Version Linux 4.9.317 #633 SMP Tue Jun 7 01:22:36 +07 2022 armv7l
Current Time Fri, 10 Jun 2022 07:17:52
Uptime 1 min
Reset: no
GUI over 49113
Issues: none
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Fri Jun 10, 2022 14:47 Post subject: New Build - 06/10/2022 - r49139
Router/Version: TP-Link TL-WDR3600 v1
File/Kernel: Linux 3.10.108-d11 #109908 Fri Jun 10 03:31:52 +07 2022 mips
Reset: No
Mode: Internet gateway, WIFI AP 5GHz, dnsmasq server, iptables firewall
Issues: Slow WAN performance
[b]Status: [/b}Working with issues
Device offer weak WAN performance. For tests I'm disable firewall functions in GUI and clear iptables rules by iptables -F. Generally I haven't higher speed than 400 mbit/s on gigabit wire interfaces. In future I try to use other network card on PC. I think problem isn't here.
Joined: 05 Oct 2008 Posts: 651 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Fri Jun 10, 2022 20:22 Post subject:
@ho1Aetoo. I upgraded my R7800 to r49139 via GUI this morning when it became available without any resets. It has now been running about 8 hrs since I last rebooted it.
CTRL+F5 has no immediately noticeable effect on either Basic Setup/Settings page.
I did accidentally notice that syslog was only half a page of just DHCPREQUEST and DHCPACK messages. I haven't noticed it being this short before. Perhaps it's just because I have rsyslog in use and nothing to do with pressing odd function keys (What is it supposed to do?).
My DNS server is the target for rsyslog and it apparently has all of the router's syslog lines.
I am still testing, but I may have a problem with this build on the 2.4MHz radio. Performance has all but stopped, down to 0.1Mb/s. 5GHz and Ethernet are normal and fast. I will cold boot the router but what should I capture to isolate a problem with one radio? _________________ Netgear R9000
DD-WRT v3.0-r54475 std (12/07/23)
Linux 4.9.337 #686 SMP Wed Nov 29 03:14:52 +07 2023 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Also seeing issues with 2.4GHz using Vanilla firmware - very slow. Previous build (06-07-2022-r49113) had the same issues and connectivity problems as well.
Switched to DD-WRT firmware on 2.4GHz and it's better (have to compare speeds to previous versions later).
Have not reset settings - will likely try that next.
Also seeing issues with 2.4GHz using Vanilla firmware - very slow. Previous build (06-07-2022-r49113) had the same issues and connectivity problems as well.
Switched to DD-WRT firmware on 2.4GHz and it's better (have to compare speeds to previous versions later).
Have not reset settings - will likely try that next.
Cold boot did not help. Will try switching from Vanilla to DD-WRT _________________ Netgear R9000
DD-WRT v3.0-r54475 std (12/07/23)
Linux 4.9.337 #686 SMP Wed Nov 29 03:14:52 +07 2023 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
