Posted: Tue Jun 07, 2022 18:08 Post subject: New Build - 06/07/2022 - r49113
Welcome to Atheros r49113 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Linksys EA8500...main gateway
DD-WRT v3.0-r49113 std (06/07/22)
Linux 4.9.317 #1000 SMP Tue Jun 7 02:11:45 +07 2022 armv7l
scp 'firmware.bin' over r49112
she is worky very good
#
Netgear WNDR3700 V4
DD-WRT v3.0-r49113 std (06/07/22)
Linux 3.18.140-d6 #145168 Tue Jun 7 18:59:14 +07 2022 mips
scp 'firmware.bin' over r49112
all good
EA8500 r49113
imma get a bit off topic but I just gotta say---
My new USB WiFi adapter just came in a bit ago.
Worky really well on that machine.
Changed MAC to match machine cause I always use local DNS and gave the EA8500 a reboot.
Here she is--
Yeahuh it's a Linksys AE6000 -- still like them peoples
(don't tell but it's really a dual band MT7610U which Debian has builtin drivers in is kernel)
The Cudy USB adapter I was using worked very good but NO drivers worky for the k5.17.x kernel yet...
...I had to keep that machine running on k5.16.x for the Cudy to work.
Router Model: Netgear Nighthawk X10
Firmware Version: DD-WRT v3.0-r49113 std (06/07/22)
Kernel Version: Linux 4.9.317 #633 SMP Tue Jun 7 01:22:36 +07 2022 armv7l
Mode: Router (WDS/APs only)
Reset: NO, GUI upgrade from r48971
Errors: None so far
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r49113 std (06/07/22)
Kernel Version: Linux 4.9.317 #1002 SMP Tue Jun 7 12:27:15 +07 2022 armv7l
Mode: Router (WDS/APs only)
Reset: NO, GUI upgrade from r48971
Errors: None so far
Past several builds (TBH not sure what build this started) give me these same two issues, on both routers. Same results via web upgrade or full reset.
(1) Poor 2.4Ghz Wi-Fi speed when using DD-WRT firmware. The connection says it is 300Mbps but won't exceed 30-35Mbps. As soon as I open the advanced settings and switch the wireless firmware to VANILLA, the speed performs as expected. Same on both routers. 5Ghz seems fine, just noticing an issue with 2.4Ghz.
(2) SpeedChecker service. The internet test will not exceed 16Mbps (hovers around 15.xx every time) using both a Wi-fi and LAN connection, both routers. When it switches to the Wi-Fi speed the test hangs and does not run. I tried enabling and disabling the service many times and re-configured my speed, location and city but it never works. Even disabled Pi-Hole but that didn't matter as expected. Would love to get this functionality back, it is super helpful/convienent.
Not sure if these are already known or not, I've been away for a bit and just jumping back in to testing new builds in the past month or two. TY
Last edited by Laithan on Wed Jun 08, 2022 0:09; edited 2 times in total
Joined: 16 Nov 2015 Posts: 6439 Location: UK, London, just across the river..
Posted: Wed Jun 08, 2022 0:06 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r49113 std (06/07/22)
Kernel Version Linux 3.18.140-d6 #145140 Tue Jun 7 17:59:42 +07 2022 mips
uptime
08:28:37 up 19:53, load average: 0.07, 0.02, 0.00
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r49113 std (06/07/22)
Kernel Version Linux 4.9.317 #1002 SMP Tue Jun 7 12:27:15 +07 2022 armv7l
uptime
10:15:36 up 16:34, load average: 0.00, 0.00, 0.00
update: CLI
reset: NO
mode: Gateway
status: Operational +
errors: Nothing new, yet...all working as it should..
Does anyone has a problems with wget on R7800 on 49113 it throws error...on few http i tested...
p.s. all sorted, ISP bill was not paid..the reason wget was not working... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Thu Jun 09, 2022 7:29; edited 2 times in total
Joined: 16 Nov 2015 Posts: 6439 Location: UK, London, just across the river..
Posted: Wed Jun 08, 2022 7:23 Post subject:
bushant wrote:
Alozaros wrote:
Does anyone has a problems with wget on R7800 on 49113 it throws error...on few http i tested...
Was on 49112 and used wget to update to 49113.
Then used wget again on 49113 without problems.
root@R7800:/tmp# wget http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/
06-07-2022-r49113/tplink_tl-wr1043nd-v2/tplink_tl-wr1043nd-v2.bin
Connecting to download1.dd-wrt.com (185.84.6.100:80)
wget: server returned error: HTTP/1.1 404 Not Found
unit works as it should, apart of wget...i need to do a reset but not present there physically, i will wait...
i may try to use another adblocker with curl or modify the current script... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 16 Nov 2015 Posts: 6439 Location: UK, London, just across the river..
Posted: Wed Jun 08, 2022 12:00 Post subject:
aghhh...after some testing, i just figured out, that the only reason for wget to not work is, ISP bill was not paid on time, so, they stopped my http(port 80) and DNS(port 53)...but as im using DoT and https (curl) to test, that was going behind...so, false alarm...bloody GF forgot to pay the ISP bill on time... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Wed Jun 08, 2022 13:34; edited 1 time in total
Posted: Wed Jun 08, 2022 13:27 Post subject: R49113
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49113 std (06/07/22)
Kernel Version Linux 4.9.317 #633 SMP Tue Jun 7 01:22:36 +07 2022 armv7l
Current Time Wed, 08 Jun 2022 07:24:35
Uptime 1 min
GUI over 49081
Reset: no
Issues: none
