New Build - 06/04/2022 - r49081

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5700

PostPosted: Sat Jun 04, 2022 11:51    Post subject: New Build - 06/04/2022 - r49081 Reply with quote
Welcome to Marvell r49081 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49049 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
mDNS/Avahi dnscrypt PHP mdadm Tor DoT Redirect SmartDNS FreeRADIUS htop rtw88 mt76 ath10k ath5k SNMP OpenSSL
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
raywan
DD-WRT User


Joined: 16 Jun 2020
Posts: 66

PostPosted: Sat Jun 04, 2022 16:24    Post subject: Reply with quote
Router/Version: Linksys WRT32X
File/Kernel: DD-WRT v3.0-r49081 std (06/04/22)
Previous/Reset: DD-WRT v3.0-r48996/
Mode/Status: AP only
Issues/Errors: Everything works fine without reset.
NTP server never sync although ntp setting is correct. This problem happened in both wrt32x and wrt1900acsv2 for a very long time. I don't know is it bug or not. When i type "startservice process_monitor" in SSH or commands page, the time sync immediately.
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5700

PostPosted: Sun Jun 05, 2022 12:32    Post subject: Reply with quote
raywan wrote:
NTP server never sync although ntp setting is correct.

Please specify correct settings to reproduce, but your problems are likely DNS related in addition to NTP.
servers = "2.pool.ntp.org 212.18.3.19 88.99.174.22"; if Server IP/Name field is blank src/router/rc/ntp.c

So use any pools or servers, but keep in mind the reasons for a few IP addresses after in case DNS fails.
Edit: The character limit is only 32, unable to replicate "blank" defaults or fit more than two IP addresses.
raywan
DD-WRT User


Joined: 16 Jun 2020
Posts: 66

PostPosted: Sun Jun 05, 2022 16:46    Post subject: Reply with quote
my ntp setting as below:
NTP Client:enable
Time Zone:Asia/Hongkong
Server IP/Name:223.255.185.2
Update Interval:3600
DHCP: Disable
Local IP:192.168.1.3
DNS server:192.168.1.1
Gateway:192.168.1.1
AP mode only. So, WAN port doesn't connect anything but the wrt32x is able to reach internet. Ping/traceroute:1.1.1.1 (No Problem at all)
Don't worry about network setting.
I used same setting on my both wrt32x and wrt1900acsv2 with 2 different sites and ISP. Both router suffer the same problem. If i execute "startservice process_monitor" in SSH or commands page. The network time update immediately. Otherwise, it never update.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14216
Location: Texas, USA

PostPosted: Sun Jun 05, 2022 18:15    Post subject: Reply with quote
If your WAN is disabled, you do not need to specify a DNS server on the main setup page and you should have dnsmasq and dhcp server disabled for WAP setup per the wiki. This is a configuration error from normal WAP configuration, most likely. You *can* set up to use dnsmasq for DNS, but you don't use your gateway IP for DNS server unless it is also running DD-WRT / OpenWRT / FreshTomato and dnsmasq is configured properly on the gateway device. Please post all screenshots to reproduce your "error" or fix your configuration.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum