Posted: Thu May 26, 2022 11:54 Post subject: New Build - 05/26/2022 - r48971
Welcome to Broadcom r48971 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Linksys WRT54GL v1.1
File/Kernel: dd-wrt.v24 mini generic r48971 / Linux 2.4.37 #68597 Thu May 26 02:17:31 +07 2022 mips
Previous/Reset: dd-wrt.v24 mini generic r48865 / no
Mode/Status: Gateway / Working
Issues/Errors: installed since release, ok.
Thank you BS and thanks you gurus for your guides and wisdom
Netgear R6250
DD-WRT v3.0-r48971 std (05/26/22)
Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Upgrade from r48954 via CLI without reset.
Work stable with dnscrypt-proxies.
Especially R6250 and Buffalo can let my PC (FBSD13.1) connect ethernet cable.
How ever, Linksys WRT1900ACS (V1) cannot, it is very strange. And linux or Windows10 is working well connection. It only caused FBSD13.1 in trouble!
Detail info on FBSD13.1 is:
detail info:
re0: flags=8843<UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM, TXCSUM,VLAN_MTU, VLAN_HWTAGGING, VLAN_HWCSUM,WOL_MAGIC, LINKSTATE>
ether a4:1f:72:xx:xx:xx
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Wireless: Vanilla
Temperatures: CPU 71.4 °C / WL1 55.5 °C
Current Time: Fri, 27 May 2022 19:28:52
Uptime: 1 day, 1:26
Reset: No
GUI install over 48865
Installed using Brave browser over wireless
No issues
Thank you BS and thanks you gurus for your guides and wisdom _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r48741-GoodBuild / No Reset, GUI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE=CTF,SSH,Syslog
Services Disabled: FA,WiFi,QoS,ttraff,Telnet,NAS,Samba
Running for over 21 hours.
OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r48741-GoodBuild / No Reset, Remote SSH Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over 20 hours.
OffSite #2
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r48741-GoodBuild / No Reset, Remote SSH Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over 3 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Sat May 28, 2022 7:36 Post subject:
Router/Version: Anus RT-AC68U E1 (C1 via DD-WRT)
File/Kernel: asus_rt-ac68u-firmware.trx / Linux 4.4.302-st14
Kernel Version: Linux 4.4.302-st14 #6090 SMP Sat May 28 03:37:03 +07 2022 armv7l
Previous/Reset: -r48957 dev build / No Reset, CLI Update
Mode/Status: Gateway/AP : Works has issues that need verification.
I ran this build for a 24 hours, I am now on 05-28-2022-r48982 dev build also working fine.
Posted: Sat May 28, 2022 12:07 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r48971 std (05/26/22) Kernel: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope. Previous: 05-23-2022-r48954 Status: Working really well so far. Access Restrictions do not appear to be working properly, still testing. Temperatures: CPU 64.7 °C / WL0 53.0 °C / WL1 54.4 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest-1.jpg
Description:
Speedtest Over 5.8GHz Wireless.
Filesize:
59.15 KB
Viewed:
2959 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Firmware: v3.0-r48971 std (05/26/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous: v3.0-r48954 std (05/23/22)
Mode/Status: AP wired and wireless / Up and running for 1.5 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.5 °C / WL1 51.5 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: Netgear WNDR4500v1
File/Kernel: dd-wrt.v24-48971_NEWD-2_K3.x_giga-WNDR4500.bin (48971)
Previous/Reset: 44112/48971
Mode/Status: 2.4GHz client, 5GHz AP, Gateway mode
Issues/Errors: Gateway mode does not work, internet is not reachable for LAN and AP clients; router as such can traceroute and ping outer world. Same behaviour no matter if WireGuard is active or not. Did also configuration reset, no behaviour change. WireGuard started to work with R6700v3/r44112 finally, but not useable w/o internet reachability for LAN & AP clients.
Router/Version: Netgear R6700v3
File/Kernel: netgear-r6700v3-webflash.bin (48971)
Previous/Reset: 43886/43886
Mode/Status: 2.4GHz AP, 5GHz AP, Gateway mode
Issues/Errors: Gateway mode does not work, internet is not reachable for LAN and AP clients; router as such can traceroute and ping outer world. Same behaviour no matter if WireGuard is active or not.
Overall seems something wrong with Gateway mode and internet / WAN reachability.