But to clarify it cannot be installed as is from that page, DD-WRT supports entware packages, so you would need to find a trustworthy and up to date package to install.
There are plenty guides on how to setup and use entware on DD-WRT, please search.
There are another (at least) 10 threads on adguard, please search.
I am running it, a slightly adapted version to use a USB stick, (I am not a fan of using the routers own flash as permanent storage) and in tandem with DNSMasq.
now im curious, curiosity killed my cat !! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Tue May 17, 2022 11:23 Post subject:
That is one aspect, but if you only use it to store some settings and do not write often than that should be no problem,
The other thing is that the one router I bricked while upgrading had JFFS2 enabled and that was indeed the problem back then, nowadays you should be good.
I am running it, a slightly adapted version to use a USB stick, (I am not a fan of using the routers own flash as permanent storage) and in tandem with DNSMasq.