egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
|
Posted: Tue May 17, 2022 13:54 Post subject: |
|
AsX wrote: | Anybody has issues with RTSP video remote streaming via forwareded 554 port, with latest builds?
Connected old camera which was working before. Same phone with same tinyCam app using same settings, nothing changed. Same forwarded port to 554. Used to work just fine, but not anymore. ONVIF connects but RTSP UDP (this camera uses UDP) streaming doesn't start. When on LAN it works.
Anybody? |
Not much to work with you do not even tell us the router you are using.
To diagnose the problem screenshots of settings page and forward page is helpful.
But a long shot, as you are posting in the Atheros forum you will likely not have CTF & FA but you will have SFE (Shortcut Forwarding Engine on Setup page)
Try with that disabled and reboot the router after disabling _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|
AsX DD-WRT User
Joined: 15 Jun 2010 Posts: 50
|
Posted: Tue May 17, 2022 14:47 Post subject: |
|
egc wrote: | AsX wrote: | Anybody has issues with RTSP video remote streaming via forwareded 554 port, with latest builds?
Connected old camera which was working before. Same phone with same tinyCam app using same settings, nothing changed. Same forwarded port to 554. Used to work just fine, but not anymore. ONVIF connects but RTSP UDP (this camera uses UDP) streaming doesn't start. When on LAN it works.
Anybody? |
Not much to work with you do not even tell us the router you are using.
To diagnose the problem screenshots of settings page and forward page is helpful.
But a long shot, as you are posting in the Atheros forum you will likely not have CTF & FA but you will have SFE (Shortcut Forwarding Engine on Setup page)
Try with that disabled and reboot the router after disabling |
R7800. Forwarding is fine, in fact it hasn't changed. I just haven't used this camera for few months (moving) and finally connected it back expecting it to work right away, but it didn't. Router went through few firmware updates, but settings hasn't changed much. QoS is disabled, firewall is pretty standard with no custom rules.
I'll try disabling SFE but I think it was enabled before, and probably not a good idea to disable it anyway.
I the log I see that there are some RTSP related modules loading (nf_conntrack_rtsp, nf_nat_rtsp) for some reason as Warnings. I wonder what they do...
If nobody has issues, I'm starting to think maybe the Internet provider at the new place is messing with some outgoing traffic. |
|
Alozaros DD-WRT Guru
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
|
Posted: Wed May 18, 2022 15:01 Post subject: |
|
Router Model Netgear Nighthawk X10
Firmware Version DD-WRT v3.0-r48886 std (05/16/22)
Kernel Version Linux 4.9.313 #628 SMP Mon May 16 03:04:47 +07 2022 armv7l
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r48886 std (05/16/22)
Kernel Version Linux 4.9.313 #951 SMP Mon May 16 03:50:59 +07 2022 armv7l
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r48886 std (05/16/22)
Kernel Version Linux 3.18.140-d6 #142528 Mon May 16 08:44:32 +07 2022 mips
update: CLI
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...10x BS, Joker, egc and others! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913 |
|