Posted: Fri May 13, 2022 5:06 Post subject: New Build - 05/13/2022 - r48865
Welcome to Atheros r48865 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 16 Nov 2015 Posts: 6411 Location: UK, London, just across the river..
Posted: Fri May 13, 2022 9:03 Post subject:
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r48865 std (05/13/22)
Kernel Version Linux 4.9.312 #948 SMP Fri May 13 03:10:08 +07 2022 armv7l
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r48865 std (05/13/22)
Kernel Version Linux 3.18.140-d6 #142408 Fri May 13 07:55:45 +07 2022 mips
update: CLI r48810 > r48865
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet... Thanks BC and devs! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 18 Mar 2014 Posts: 12839 Location: Netherlands
Posted: Fri May 13, 2022 12:59 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r48865M Community Build by EGC (05/13/22)
Upgraded from: DD-WRT v3.0-r48811M Community Build by EGC (05/06/22)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working
After flashing, the R9000 would not finish the reboot. A factory reset did bring the router online with the new version. I tried to restore my settings backup from r48865 but on reboot the router hung. I factory reset again, flashed back to r48810 and restored my backup. All is normal now.
Either I had an unusual, unique issue updating or there is a problem with r48865 on the Netgear R9000.
BE CAREFUL WITH THIS UPDATE IF YOU HAVE A R9000 _________________ Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
After flashing, the R9000 would not finish the reboot. A factory reset did bring the router online with the new version. I tried to restore my settings backup from r48865 but on reboot the router hung. I factory reset again, flashed back to r48810 and restored my backup. All is normal now.
Either I had an unusual, unique issue updating or there is a problem with r48865 on the Netgear R9000.
BE CAREFUL WITH THIS UPDATE IF YOU HAVE A R9000
Thank you for the heads up. Will pass on this build.
Joined: 16 Nov 2015 Posts: 6411 Location: UK, London, just across the river..
Posted: Fri May 13, 2022 21:07 Post subject:
RobrPatty if you read carefully MLandi post, you would find its a bad fash/setup, as unit is operational after reset...ill try this build soon, on Monday...probb other users will try it too...anyway...
Bad flash, no reboot could be due to bad settings, as well tons of other things...
If im not wrong, BS still uses/tests builds on R9000 too...unless he moved to another router...
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..
I guess he has his own reasons..in fact R9000 has TFTP, so its brick resistant _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
RobrPatty if you read carefully MLandi post, you would find its a bad fash/setup, as unit is operational after reset...ill try this build soon, on Monday...probb other users will try it too...anyway...
Bad flash, no reboot could be due to bad settings, as well tons of other things...
If im not wrong, BS still uses/tests builds on R9000 too...unless he moved to another router...
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..
I guess he has his own reasons..in fact R9000 has TFTP, so its brick resistant
I had to recover quickly because I needed the router to work from home. I'll give it another try this weekend and see if I have issues. Logs would have been difficult because the router was not functional; nothing would connect. Again, I was in a hurry so I restored, made my report and got to work. _________________ Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..
Do you know a way I can get log data from the router if it crashes? As for setup, my signature has a lot of detail and I do report that I update via the command line. I'd like to provide as much info as possible. _________________ Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Posted: Fri May 13, 2022 22:15 Post subject: R48865
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r48865 std (05/13/22)
Kernel Version Linux 4.9.312 #627 SMP Sun May 8 16:12:08 +07 2022 armv7l
Current Time Fri, 13 May 2022 16:09:48
Uptime 1 min
GUI over R48810
Reset: no
Issues: Upgrade flash went smooth, no problems
Joined: 16 Nov 2015 Posts: 6411 Location: UK, London, just across the river..
Posted: Fri May 13, 2022 22:29 Post subject:
MLandi wrote:
Alozaros wrote:
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..
Do you know a way I can get log data from the router if it crashes? As for setup, my signature has a lot of detail and I do report that I update via the command line. I'd like to provide as much info as possible.
1. via remote log management - https://www.papertrail.com/
2. via "Visual Syslog server" free program, the one i used in the past
3. there was a script that saves backup of "cat /tmp/var/log/messages" at /opt or /jffs, via cron time commands by your choice, have a deep look at the forum _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Linksys EA8500...main gateway
DD-WRT v3.0-r48865 std (05/13/22)
Linux 4.9.312 #946 SMP Fri May 13 01:18:12 +07 2022 armv7l
GUI install over r48839
all ok
#
Netgear WNDR3700 V4
DD-WRT v3.0-r48865 std (05/13/22)
Linux 3.18.140-d6 #142436 Fri May 13 08:59:38 +07 2022 mips
scp 'firmware.bin' to /tmp ... over r48839
all ok