gyozteske DD-WRT Novice
Joined: 09 May 2022 Posts: 1
|
Posted: Mon May 09, 2022 17:56 Post subject: [Need a specialist] |
|
Hi,
I have the followings:
Wifi cards, all of them are AX 4X4 and M.2 connectors:
2,4 GHz: https://wallystech.com/Network_Card/DR9074-2.4G-PN01.1-Wifi-6-Qualcomm-QCN9074-Single-Band-2.4-GHz-4T4R-M.2-E-Key-Interface-802.11ax.html
5,6 GHz: https://wallystech.com/Network_Card/DR9074-5G-PN02.1-Wifi-6-Qualcomm-QCN9074-Single-Band-5-GHz-4T4R-M.2-E-Key-Interface-802.11ax.html
6,5 GHz: https://wallystech.com/Network_Card/DR9074-6E-Wifi6E-Qualcomm-QCN9074-Single-Band-6GHz-4T4R-M-2-E-Key-Interface-802-11ax.html
5G mobilnet: https://www.quectel.com/product/5g-rm500q-gl
There are 3 routers, where I have the hardwares but I need a specialist, how can install and finalize the softwares.
1. This is a PC:
MSI B460I
Intel Core i7
32 GB mem
1 TB NVMe SSD
1 pc 2.5 eth port
A pile of USB inner and outer connectors
3 pcs M.2 slot for 3 wifi cards
Goal: center of communication = pc + wifi router + nas in one small box (existing mini ATX case)
If you have a small apt, you need only just this box.
2. This is a router:
DR6018
1 pc 2.5 eth
4 pcs gigabit eth
integrated 2,4 AX wifi 2X2
integrated 5,6 AX wifi 2X2
1 pc M.2 slot for 6,5 wifi card
1 pc M.2 for 5G card
Now it is openwrt on it, but the manufacturer forgot to finish the software, so the wifi6e and the 5G do not work.
It has UART and cable for communicate with the bootloader.
Goal: 5G + wifi router
3. Mini router:
Rock PI E
1 pc gigabit eth
1 pc USB 3.0 (we can connect the 5G modem here with an existing converter)
I installed a debian the a 128GB EMMC, but I'm not a linux specialist, so I'm here without a working driver.
It has a basic wifi and a bluetooth but these are only for config for me.
Goal: 5G bridge / router.
Is anybody here who can help me remotely?
It is a project, not a charity.
Thank you!
Gyozo |
|
bl4cklabel DD-WRT Novice
Joined: 09 Aug 2022 Posts: 1
|
Posted: Wed Feb 22, 2023 11:19 Post subject: Did you ever find someone to help you with this project? |
|
This post is old, so I'd assume you've already found somebody to assist you. Seeing as you haven't updated us here, I figured I'd reach out anyway. If you still need assistance, send me a PM or reply here. |
|