New Build - 05/06/2022 - r48810

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3  Next
Author Message
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6407
Location: UK, London, just across the river..

PostPosted: Sat May 07, 2022 10:07    Post subject: Reply with quote
yep i did check it now...and its showing
so i must ve been confused to report it was US indeed...
root@Netgear:~# iw reg get
global
country CA: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 30), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR
(5250 - 5350 @ 80), (N/A, 24), (N/A)
(5470 - 5600 @ 80), (N/A, 24), (N/A)
(5650 - 5730 @ 80), (N/A, 24), (N/A)
(5735 - 5835 @ 80), (N/A, 30), (N/A)

than checked "wlan1_regdomain"
wlan1_regdomain=US

and i thought it doesn't make a sense, y US...
so, i started to wonder.....but, i miss-looked the first line of global
country CA: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 30), (N/A)
and i had a wrong believe the putput its all about 5Ghz witch i don't even use...so yep, i was confused, as i was chasing an optimal WiFi settings and possible solution to an issue that I have going around...so, i adopted the believe there must be something wrong with country domains and the NVRAM variable it was showing US...so, now i see what is all about and it seems correct...
I'm sorry for the confusion and thanks for the clarification...
so, nvram setting wlan1_regdomain=US has no function at all... Rolling Eyes
and i may need to do a reset, when im physically next to the unit Razz

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Sponsor
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Sat May 07, 2022 14:41    Post subject: Reply with quote
Up and stable for 25+ hours. No issues. Thanks, BS & Team!
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 229

PostPosted: Sat May 07, 2022 22:32    Post subject: Reply with quote
Netgear XR500 - Gateway
Firmware Version: DD-WRT v3.0-r48810 std (05/06/22)
Kernel Version: Linux 4.9.312 #921 SMP Fri May 6 02:24:58 +07 2022 armv7l
Temperatures: CPU 56.291 °C / wlan0 60 °C / wlan1 64 °C
Current Time: Sat, 07 May 2022 15:28:57
Uptime: 17:03
Reset: No
GUI install over 48786
Installed using Brave browser over wireless
No issues

Thank you BS and thanks you gurus for your guides and wisdom

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Sun May 08, 2022 8:35    Post subject: New Build - 05/06/2022 - r48810 Reply with quote
Router/Version: TP-Link TL-WDR 3600 v. 1.5
Kernel: Linux 3.10.108-d11 #106297 Fri May 6 05:02:06 +07 2022 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq server, iptables firewall
Issues: Wireguard is active probably when it's disabled in GUI, slow WAN port, WIFI range weak. Generally device have worse work.
Status: Working with issues
Uptime: ~1 day, but today I'm make reboot via command line. I'm attach fresh syslog to check possibly problems.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12834
Location: Netherlands

PostPosted: Sun May 08, 2022 9:01    Post subject: Reply with quote
If you have WireGuard loaded it checks for current time and it seems you do not have current time on your router, that is what it is complaining about.

You can ignore the warning if you do not want/have time setup on your router

But not having current time can cause other problems so consider reviewing your setup.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Sun May 08, 2022 11:12    Post subject: New Build - 05/06/2022 - r48810 Reply with quote
The current time problem is related to the fact that when I'm dump log the cable to the WAN port was not connected. I do not understand why WireGuard reports in the log when it is completely turned off in the device configuration. Due to the slow performance lately, I will probably do a clean router configuration.
Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Mon May 09, 2022 13:19    Post subject: Reply with quote
Router/Version: Netgear XR500
File/Kernel: DD-WRT v3.0-r48810 std (05/06/22)/Linux 4.9.312 #921 SMP Fri May 6 02:24:58 +07 2022 armv7l
Previous/Reset: r48255/No
Mode/Status: Gateway/OK
Issues/Errors: None

This is my first update since the massive upgrade to the GUI and the overhaul of the wireless code (?). The GUI looks terrific, and the router is performing exceptionally well. Thank you.

_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
nyddwrtuser330
DD-WRT User


Joined: 05 Mar 2018
Posts: 217

PostPosted: Mon May 09, 2022 15:24    Post subject: Reply with quote
r900
Reset: No
GUI install over 48786

5ghz, wds AP 80, 2.4 HZ, Vanilla, QOS fq_codel, SMB, DNSCrpt, DNSMASQ,

seems more stable than previous build (router had to be restarted at 24hrs on 48786 due to unresponsiveness)

This build is logging some strangenesess from Wireguard locking and unlocking oet1 files. Its strange becuase i have no tunnels or wireguard configured.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12834
Location: Netherlands

PostPosted: Mon May 09, 2022 16:19    Post subject: Reply with quote
You can ignore the logging about WireGuard those are harmless.

But for all you nervous nellies I will remove it in a future build Smile

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Mon May 09, 2022 21:45    Post subject: Reply with quote
it seems wireguard (and sometimes unbound) is complaining about ntp on boot up, since x86_64 takes A YEAR to boot for whatever reason, they are probably starting before ntp client does thus no time set for a while longer and they panic..
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

nyddwrtuser330
DD-WRT User


Joined: 05 Mar 2018
Posts: 217

PostPosted: Tue May 10, 2022 14:42    Post subject: Reply with quote
now that ive been running this build for a bit i have some observations

there seems to be some behavioural differenes on
47692 i was able to eek out my best latency with QOS of HTB/cake, netdev max backlog 2k,

in this build the wireless 5ghz doesnt perform as well with those settings. My best overall latencies seem to be with
max backlog - 384, HFSC/FQ_codel

in both cases my networking queue length was modified to 3 from the 1000 default. In wired testing, the difference was only 2-3 ms, depending on how tested.

Not sure what could have changed that would have affected the latency by about 10ms difference in settings.
jbkt23
DD-WRT User


Joined: 31 Dec 2018
Posts: 57

PostPosted: Tue May 10, 2022 20:10    Post subject: Reply with quote
TP-Link ARCHER-C7 v5 Daul Band Wifi / Router
DD-WRT v3.0-r48810 std (05/06/22
Linux 3.18.140-d6 #141654 Fri May 6 07:24:51 +07 2022 mips
New DD-WRT install uploaded via WebUI.
Mode: Gateway
Uptime: 2 Hrs

My laptop could not connect to 5Gz with Channel set to Auto and for now it is set on channel 36.

This router is being rotated in to replace the Sig unit that will now be updated to current firmware.

_________________
ARCHER-C7v5 | v3.0-r54604 std | AP Gateway
WNDR4000|v24-52189_NEWD-2_K3.x_mega|Inactive Spare
habeIchVergessen
DD-WRT User


Joined: 04 May 2010
Posts: 427

PostPosted: Wed May 11, 2022 7:37    Post subject: Reply with quote
hardware: ea8500
software: r48810

solved: ipsec issue reported for r48567
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Wed May 11, 2022 10:42    Post subject: Reply with quote
egc wrote:
You can ignore the logging about WireGuard those are harmless.

But for all you nervous nellies I will remove it in a future build Smile

I'm not a nervous nellie, I'm and anxious whatsit, to me, since I dont use openVPN or Wireguard in DD-WRT it's not even enabled, I find it a waste of CPU cycles to read the noise Wireguard and such makes.

IDK if its possible to grab the state of the options before trying to check whatever it is that any of those are checking.

Or whatever.

Your friendly neighborhood anxious whatsit Wink

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)


Last edited by the-joker on Wed May 11, 2022 11:04; edited 1 time in total
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Wed May 11, 2022 11:01    Post subject: Reply with quote
To avoid misunderstandings.

But the static DHCP clients have renewed their DHCP lease since the router was restarted?
Goto page Previous  1, 2, 3  Next Display posts from previous:    Page 2 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum