Posted: Fri May 06, 2022 6:32 Post subject: New Build - 05/06/2022 - r48810
Welcome to Atheros r48810 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
update: CLI r48786 > r48810
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet... Thnaks BS and devs(egc, Joker and ect.)
on R7800 output of nvram show | grep regdomain shows output of
wlan1_regdomain=UNITED_STATES
witch is wrong...or standard for 2,4Ghz ?
i ve set up for global country domain CANADA
i can see only for wlan0 (5Ghz) its set to CANADA
so i sat:
nvram set wlan1_regdomain=CANADA
nvram commit
while on my 1043v2 2.4Ghz shows correct for reg domain CANADA...
i guess they both use a different drivers for 2,4Ghz or ?? _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Fri May 06, 2022 12:29 Post subject: R48810
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r48810 std (05/06/22)
Kernel Version Linux 4.9.312 #626 SMP Sun May 1 03:26:55 +07 2022 armv7l
Current Time Fri, 06 May 2022 06:25:32
Uptime 1 min
GUI over 48786
Reset: no
Issues: all good last 4 or 5 builds
Joined: 18 Mar 2014 Posts: 12889 Location: Netherlands
Posted: Fri May 06, 2022 13:41 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r48810M Community Build by EGC (05/06/22)
Upgraded from: DD-WRT v3.0-r48786M Community Build by EGC (05/03/22)
Reset: No not this time
Status: Up and running for 3 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working
Apologies, possibly is a silly question but to achieve the functionality of unbound and/or DN-TLS do you just select them by ticking them in the GUI? or any other steps are required?
Joined: 16 Nov 2015 Posts: 6440 Location: UK, London, just across the river..
Posted: Sat May 07, 2022 7:04 Post subject:
yep all started with
iw reg get - it was showing US
as well the output of nvram show | grep regdomain=
wlan1_regdomain=US
wlan0_regdomain=CANADA
and them my wonder is, if global is set to Canada why it affects only 5Ghz...so, is it fixed to US for wlan1 (2,4Ghz), and there is no point changing the nvram variable to Canada...
May be as i haven't done reset for a long time i carried out old variables...? _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913