WRT3200ACM - DD-WRT and Rind Doorbells

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
weavol
DD-WRT Novice


Joined: 28 Nov 2011
Posts: 15

PostPosted: Tue Feb 22, 2022 3:33    Post subject: WRT3200ACM - DD-WRT and Rind Doorbells Reply with quote
I'm on my second WRT3200ACM. I bought the first one from Amazon and upgraded it to DD-WRT Firmware v3.0-r47528.

I was never able to get my Ring Doorbells to work right and so I bought a WRT3200ACM from Flashrouters thinking I'd get some expert support. They upgraded me to WRT3200ACM - DD-WRT v3.0-r42335 std (02/10/20) and somehow they got them working this weekend.

Long story short they've quit again and I cannot get them to connect. I even restored a backup from last night (when they were working)

The Ring Door bells are -- Ring Video Doorbell – 2020 release – 1080p HD video, improved motion detection, easy installation – Satin Nickel

I have WRT54GL and when I connect these Ring Doorbells to that router they work EVERY TIME
Sponsor
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5650

PostPosted: Tue Feb 22, 2022 7:35    Post subject: Reply with quote
Driver & binary blob issue unfortunately Linksys nor Marvell develop or support as WiFi/BT sold to NXP.
Easy fix is to set up an access point for example with WRT54GL, or migrate to Atheros hardware setup.
Recommended: R7800 (XR450/XR500), R9000 (R8900/XR700), R7500v2, EA8500 (serial flash) or x86.

Due to recent changes in mac80211 affecting Marvell WRT series use the builds no earlier than r47720,
a build from December 2021 but always recommend latest available. New Build - 02/20/2022 - r48402

Early known workarounds in the past have been to limit your 2.4 GHz wireless network modes G-Only,
BG-Mixed or disable WMM which indirectly forces legacy rates. New builds might find option to disable
LDPC (ESP8266 workaround) in 2.4 GHz advanced settings. IoT smart home switch automation TLDR.
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Tue Feb 22, 2022 22:26    Post subject: Reply with quote
I'll echo that. One 2.4 SSID with WMM support disabled, and one 2.4 SSID with WMM support enabled. Both are NG-Mixed.

I have two devices from the same manufacturer, and one will only connect to the disabled and the other will only connect to the enabled WMM network.

_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
JackPollack
DD-WRT User


Joined: 22 May 2015
Posts: 60

PostPosted: Wed May 04, 2022 13:05    Post subject: Reply with quote
I had similar issues and was able to fix them with suggestions from this post.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1262030#1262030
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum