Failure404 DD-WRT Novice
Joined: 10 Dec 2011 Posts: 37
|
Posted: Fri Apr 15, 2022 13:38 Post subject: R7000 as IPv6 client only? |
|
Hi,
I have sort of a weird network setup here, I hope someone can help me.
Fritz box connected to dual stack ISP and in bridge mode.
R7000 connected to Fritz box via WAN port to Fritz bridged port - R7000 gets IPv4 from Fritz box, all lan clients connected to R7000 and use IPv4 through R7000.
Now there is an additional lan - lan connection between Fritz box and R7000.
Fritz box acts as dhcp6 server and assigns IPv6 to lan clients. Lan clients access IPv6 internet directly through Fritz box, not going through R7000 WAN. This is intended and works.
Now, how can I make R7000 get an IPv6 from Fritz box like all other lan clients without any prefix delegation and/or routing?
R7000 WAN is on vlan2 and LAN is on br0. I assume the Fritz box dhcp6 server is reachable via br0, can I get an IPv6 for the R7000 from Fritz box with dhcp6c via LAN? |
|