New Build - 04/12/2022 - r48646

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Apr 12, 2022 18:01    Post subject: New Build - 04/12/2022 - r48646 Reply with quote
Welcome to Marvell r48646 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48607 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
iPerf3 curl IPTraf FRR Unbound OpenSSL APFS exFAT BIRD mtr Dropbear lighttpd lzo dosfs zlib mac80211 ZFS mDNS/Avahi
In-kernel Samba (ksmbd 3.4.4++) guest behavior now selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Wed Apr 13, 2022 20:19    Post subject: Reply with quote
Router Model Linksys WRT1900ACS V2
Firmware Version DD-WRT v3.0-r48646 std (04/12/22)
Kernel Version Linux 4.9.309 #3165 SMP Tue Apr 12 13:19:12 +07 2022 armv7l
Uptime 23:22

update- browser-waterfox,I switched directly from the first partition from the original software,

connection Type PPPoE-IPv6 Type DHCPv6 with Prefix Delegation-, Radvd-Enable, Schedule Reboot- All ok

Port Forwarding ok

adblock- ok https://github.com/AnielShri/ddwrt-adblocker#startup-code

Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36-Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N/G, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok

from what I notice there are differences in performance on the wifi side between versions, there is also a high latency in ping during speed tests on the wifi side, if I try to open putty with htop command during the test it disconnects, the previous version handles the wifi side better!

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Wed Apr 13, 2022 20:34    Post subject: Reply with quote
....
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 252

PostPosted: Sat Apr 16, 2022 20:05    Post subject: Reply with quote
Router/Version: Linksys WRT1900ACS / DD-WRT v3.0-r48646 std (04/12/22)
File/Kernel: CLI webflash / Linux 4.9.309 #3165 SMP Tue Apr 12 13:19:12 +07 2022 armv7l
Previous/Reset: r48432 / No
Mode/Status: Gateway, DNSmasq, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3 / Uptime 29 min
Issues/Errors: No issues or errors so far, thanks! Ping over wifi to (<1ms) and through the router both look normal for my config.

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Sun Apr 17, 2022 3:53    Post subject: Reply with quote
the ping problem occurs during a speed test!
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 252

PostPosted: Sun Apr 17, 2022 13:52    Post subject: Reply with quote
oliver44 wrote:
the ping problem occurs during a speed test!


I gathered that from your #1 test (2ms ping which I assume was using a previous release) versus all the others (16-18ms ping which I assume were using the current release), but I'm just not seeing it with my configuration. You'd mentioned wifi, which I assume is only between your client and local router, but your speed tests seem to have little to do with local wifi and more to do with variable performance over the generally wired Internet. To be fair, I'm running VPNs on mine, so although my ping tests to the router are generally <1ms, my ping and speed tests through the router (and therefore through the VPN) are (with the current release) and have always been (with previous releases) closer to your latest release results. But unless I'm missing something, you haven't ruled out that the differences (e.g., 2ms versus 16-18ms) you observed weren't related to variable IP routing on the WAN/Internet side. IP hop counts and/or traces might offer some additional clues (and I believe both can be performed from the dd-wrt router's internal command shell using ping, traceroute, etc., if you care to skip, rule out, or even back-trace the wifi hop).

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Sun Apr 17, 2022 14:23    Post subject: Reply with quote
on the wire side things are fine ping changes I noticed only during the upload test, on openwrt I did not notice this anomaly
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 252

PostPosted: Sun Apr 17, 2022 14:57    Post subject: Reply with quote
I'm still not sure how you can be sure it's not on the WAN side. The increase in wifi ping response from your own router in the midst of an intensive upload does not seem unusual given the load vs. processing and/or bandwidth vs. rate going on, but probably implies that it has predictably de-prioritized responding to your ping while it keeps up with the upload data burst and handles other higher priority tasks. More importantly, this should not impact initial ping results in Internet speed tests (and apparently does not from your last two screenshots). So, if the issue to be examined is the 16-18ms ping response in your earlier #2-#5 shots, you still need to catch it in the act with ping (that is, pinging just the wifi hop while simultaneously getting a slow initial ping result from the speed test). Ping and traceroute from the router's command shell rather than the client really might be more helpful here, especially since you could then ping and even traceroute in either direction from the router itself.
_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
Gameman Advanced Kid
DD-WRT Guru


Joined: 18 Nov 2012
Posts: 1158

PostPosted: Sun Apr 17, 2022 16:21    Post subject: Reply with quote
Router Model: Linksys WRT32X
Firmware Version: DD-WRT v3.0-r48646 std (04/12/22)
Kernel Version: Linux 4.9.309 #3165 SMP Tue Apr 12 13:19:12 +07 2022 armv7l

MiniDLNA, Samba, WiFi appear to be fine.

One issue that keeps pulling my attention is the RAM usage on this thing. its using 75 percent when the router is idle.

I dont know if this is related to miniDLNA setting "Keep metadeta on storage". If I leave it disabled, the ram using is about 51 percent or so.

But if I enable it, I get what you see in the picture.

EDIT: I almost forgot to mention this. Yes, I did do a factory reset and then re-setup from scratch on this firmware.

_________________
For people who are new to the dd-wrt forums >> http://www.catb.org/~esr/faqs/smart-questions.html#rtfm

barryware wrote:
It takes a "community" to raise a router..


Internet Connection 1
Some Techicolor modem > Linksys WRT3200ACM

Internet connection 2
Ubiquiti Powerbeam Gen 2 > Netgear R9000

Official (but not really) dd-wrt General Discussion element/matrix chat

https://matrix.to/#/#dd-wrt-private-non-offical:matrix.org


Last edited by Gameman Advanced Kid on Mon Apr 18, 2022 3:11; edited 1 time in total
routerrodney
DD-WRT Novice


Joined: 29 Mar 2021
Posts: 1

PostPosted: Sun Apr 17, 2022 18:42    Post subject: Client bridged mode and DD-WRT GUI unresponsive Reply with quote
Router/Version: Linksys WRT1900ACv2 / DD-WRT v3.0-r48646 std (04/12/22)
Previous/Reset: r48567 / no reset
Mode/Status: Client Bridged
Issues/Errors: Loss of internet connectivity/GUI unresponsiveness

This is my first post to the DD-WRT forums so apologies if I leave out something.

I do all firmware updates using the GUI with Firefox 99.0.1.

I'm running in Client Bridged mode exactly following these wiki steps:
https://forum.dd-wrt.com/wiki/index.php/Client_Bridged

I use this router for a few test hosts which do not generate much traffic,
but noticed they would lose internet connectivity after the router was up for
only a few minutes. The past several firmware versions operating in Client Bridged
mode were very stable. Since I had not done a factory reset for several of the
recent firmware upgrades I decided to reset the router and attempt to reconfigure
Client Bridged mode.

After factory resetting the router and using my web browser to get to the GUI,
after just a few mouse clicks (didn't seem to matter which tabs I selected) the
GUI would become unresponsive. I tried several factory resets and power cycling
the router and was never able to configure for Client Bridged mode because of the
GUI problems.

DD-WRT versions previous to r48646 operated fairly reliably in Client Bridged mode but
I had documented r48362 was particularly stable (and also a stable GUI). I switched back
to r48362 and have no issues.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum