New Build - 04/12/2022 - r48646

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4  Next
Author Message
dlmrrr
DD-WRT Novice


Joined: 18 Apr 2022
Posts: 5

PostPosted: Mon Apr 18, 2022 15:08    Post subject: Reply with quote
TP-Link ARCHER-C7 v5

48646 works, uptime 17 hrs+ now
Updated on the GUI from 44715
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Mon Apr 18, 2022 15:20    Post subject: Reply with quote
dlmrrr wrote:
TP-Link ARCHER-C7 v5

48646 works, uptime 17 hrs+ now
Updated on the GUI from 44715


Coming from such an old build it is recommended to reset to defaults after upgrade and put settings in manually.
(You could opt not to and see how it goes Smile )

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
dlmrrr
DD-WRT Novice


Joined: 18 Apr 2022
Posts: 5

PostPosted: Mon Apr 18, 2022 19:09    Post subject: Reply with quote
egc wrote:
Coming from such an old build it is recommended to reset to defaults after upgrade and put settings in manually.
(You could opt not to and see how it goes Smile )


Thanks! Wink
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Tue Apr 19, 2022 12:23    Post subject: Reply with quote
Router/Version: Netgear XR500
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.309 #873 SMP Tue Apr 12 13:07:36 +07 2022 armv7l
Previous/Reset: r47618 factory-to-ddwrt.img / yes
Previous Previous/Reset: Netgear XR500 V2.3.2.66 (installation guide by egc) / yes
Mode/Status: Gateway, SFE, SmartDNS, AP+AP (WPA2/WPA3), 802.11r / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
q8diver
DD-WRT Novice


Joined: 23 Apr 2022
Posts: 5

PostPosted: Sat Apr 23, 2022 18:42    Post subject: Reply with quote
TP-Link TL-WR940N EU V6
the flash work ok but the site not working
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Sat Apr 23, 2022 20:21    Post subject: Reply with quote
q8diver wrote:
TP-Link TL-WR940N EU V6
the flash work ok but the site not working


WTH Rolling Eyes this don't looky right


prolly should clear browser cache & junk Twisted Evil
q8diver
DD-WRT Novice


Joined: 23 Apr 2022
Posts: 5

PostPosted: Sat Apr 23, 2022 20:56    Post subject: Reply with quote
i did clear browser cache & junk but not working
i try other firmware the same i get the same
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sat Apr 23, 2022 22:21    Post subject: Reply with quote
Use Firefox, go to http://192.168.1.1 (don't add anything)...
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
q8diver
DD-WRT Novice


Joined: 23 Apr 2022
Posts: 5

PostPosted: Sat Apr 23, 2022 22:49    Post subject: Reply with quote
kernel-panic69 wrote:
Use Firefox, go to http://192.168.1.1 (don't add anything)...



Thank you it work great with Firefox
q8diver
DD-WRT Novice


Joined: 23 Apr 2022
Posts: 5

PostPosted: Sun Apr 24, 2022 5:28    Post subject: Reply with quote
there is no Wireguard in drop down menu

How to add Wireguard to my router please


TP-Link TL-WR940ND v6
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Sun Apr 24, 2022 7:22    Post subject: Reply with quote
q8diver wrote:
TP-Link TL-WR940ND v6

that is a pissyass 4MB flash router Twisted Evil
servicetech
DD-WRT User


Joined: 26 Jun 2019
Posts: 377

PostPosted: Sun Apr 24, 2022 7:54    Post subject: Reply with quote
Hardware limits (flash space, CPU). You need a dual core device with >> 1 Ghz CPU and 8M+ flash or more depending on the VPN speed you expect.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Mon Apr 25, 2022 8:59    Post subject: Reply with quote
i have a odd issue on my 1043v2 (now running 48646)

couple of build backswords i've found some of my rules regarding -m mac --mac-source are not listed under iptables -vnL
but, i can see those saved in nvram show....
iptables -I INPUT -i eth0 -m mac --mac-source xx:xx:xx:xx:xx:xx -j REJECT

in start up i also do have
insmod ipt_mac
insmod xt_mac


but, if i look at lsmod

ipt_mac modules are not there...i can see only xt_mac

root@T1043NDv2:~# lsmod
Module Size Used by
ext4 284964 2
jbd2 39920 1 ext4
mbcache 3920 1 ext4
crc16 960 1 ext4
ebt_pkttype 488 2
ebtable_filter 864 1
ebtables 13888 1 ebtable_filter
xt_mac 648 0
usb_storage 36768 2
sr_mod 11248 0
cdrom 23184 1 sr_mod
sd_mod 25024 3
scsi_mod 77904 3 usb_storage,sr_mod,sd_mod
ehci_platform 3292 0
ehci_hcd 31328 1 ehci_platform
usbcore 117108 4 usb_storage,ehci_platform,ehci_hcd
usb_common 1024 1 usbcore
nls_base 4688 1 usbcore
nf_nat_pptp 1312 0
nf_conntrack_pptp 2968 1 nf_nat_pptp
nf_nat_proto_gre 800 1 nf_nat_pptp
nf_conntrack_proto_gre 2448 1 nf_conntrack_pptp
ipt_webstr 2688 1
xt_DSCP 1440 1
ipt_ah 648 0
ipt_TRIGGER 1856 5
nf_nat_h323 4752 0
ipt_REJECT 904 19
ipt_MASQUERADE 552 2
compat_xtables 1536 0
xt_NETMAP 1104 0
xt_tcpmss 960 1
xt_iprange 864 0
xt_LOG 704 0
xt_string 696 0
xt_state 648 0
xt_conntrack 2752 18
xt_recent 5864 4
xt_CLASSIFY 528 0
xt_connlimit 3268 1
xt_connbytes 1448 0
xt_TCPMSS 2512 1
xt_limit 904 7
xt_CT 2352 0
xt_REDIRECT 1024 0
xt_length 656 0
xt_NFLOG 584 0
nf_conntrack_h323 33848 1 nf_nat_h323
iptable_mangle 868 1
iptable_raw 612 1
tun 15056 2
ath9k 498192 0
ath 14784 1 ath9k
mac80211 651684 2 ath9k,ath
compat 23248 2 ath9k,mac80211
ag71xx 20784 0
sch_pie 3804 4

the issue is very random, sometimes those load up and show off...but very rarely...it may takes mind boggling number of reboots...

I also did try to reset and manually rebuild with no avail...

i also tried to redesign firewall rules and start up commands and ect..but my set up was ok in the past and haven't moved away of it...ever since...
10x in advance !

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Mon Apr 25, 2022 10:01    Post subject: Reply with quote
I think ipt_mac is for early K2.6 after that it is superseded by xt_mac.ko

If I am correct then ipt_mac is not used any more as all K2.6 is the latest K2.6 build and should use xt_mac.ko (and 2.4 does not use .ko)

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Mon Apr 25, 2022 12:04    Post subject: Reply with quote
egc wrote:
I think ipt_mac is for early K2.6 after that it is superseded by

If I am correct then ipt_mac is not used any more as all K2.6 is the latest K2.6 build and should use xt_mac.ko (and 2.4 does not use .ko)


yep according to wiki you are correct...
https://wiki.dd-wrt.com/wiki/index.php/Iptables_command

but the default 3.18.xxx on 1043v2 doesn't have xt_mac.ko
and i need it in order to gain contol of my router as i have rules rejecting GUI and only specific macs are permited to it...
and i add those rules manually vial SSh when i need those

if no xt_mac.ko - is installed i get:

iptables v1.8.5 (legacy): Couldn't find match `mac'

Try `iptables -h' or 'iptables --help' for more information.

and no fun...
the problem is those rules are working when module is installed, but iptables -vnL command doesnt alwasy shows the output of it...
and usialy i have a couple of bad devices connected to the router ahead, that constantly spam the eth0 (WAN) with trys...(topology is router bhnd router, Doble NAT) and second router is a VPN client...(with NAT)...and firewall rules...

the other odd bit is...
if i have xt_mac.ko installed via start up script and my rules are in the firewall
when boots badly, lsmod shows xt_mac with 0, iptables -vnL (rules missin)
but if i add those manually via SSh they start to apear in lsmod...as well iptables -vnL

weirdo is, it takes a mind boggling number of reboots to.... boot once (correctly) and shows lsmod info as well iptables -vnL output,
but most of the time it doesn't boot as it should....

may be i have to set sleep 10 or 20 on the top of the firewall script... ?


P.S.

all sorted sleep 5 did the trick...
it seams BS must've adjusted start up script to be executed later than the firewall for some reason...no clue why sometimes it does the opposite 1 out or 100 times and my rules ware shown...
now back to normal...bloody sleep 5 on the top of my firewall rules did the trick problem solved Razz Cool Laughing

now another annoying thing is if in GUI 'apply' button is pressed process restart also triggers shutdown script.... i hate that moment as i need to manually reboot some services....

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Mon Apr 25, 2022 12:18; edited 1 time in total
Goto page Previous  1, 2, 3, 4  Next Display posts from previous:    Page 3 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum