Wi-Fi down after a while on WRT3200ACM

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
View previous topic :: View next topic  
Author Message
NoGool4g
DD-WRT Novice


Joined: 12 Nov 2021
Posts: 7
PostPosted: Fri Mar 18, 2022 19:18    Post subject: Wi-Fi down after a while on WRT3200ACM Reply with quote
Router/Version: WRT3200ACM
File/Kernel: 4.9.288
Previous/Reset: None
Mode/Status: Gateway
Issues/Errors:

Hello guys. I have updated from r44863 to DD-WRT v3.0-r47618 std (11/05/21).

After a while, the Wi-Fi is not available anymore, but I am still able to reach the router from a machine connected with RJ45.

The dmesg provides this:

Quote:
[246394.055178] mwifiex_sdio mmc0:0001:1: 24609408 : Tx timeout(#1), bss_type-num = 1-2
[246395.015179] mwifiex_sdio mmc0:0001:1: 24609504 : Tx timeout(#1), bss_type-num = 1-1
[246400.055175] mwifiex_sdio mmc0:0001:1: 24610008 : Tx timeout(#2), bss_type-num = 1-1
[246404.055176] mwifiex_sdio mmc0:0001:1: 24610408 : Tx timeout(#2), bss_type-num = 1-2
[246410.055172] mwifiex_sdio mmc0:0001:1: 24611008 : Tx timeout(#3), bss_type-num = 1-1
[246414.055173] mwifiex_sdio mmc0:0001:1: 24611408 : Tx timeout(#3), bss_type-num = 1-2
[246420.055173] mwifiex_sdio mmc0:0001:1: 24612008 : Tx timeout(#4), bss_type-num = 1-1
[246424.055173] mwifiex_sdio mmc0:0001:1: 24612408 : Tx timeout(#4), bss_type-num = 1-2
[246430.055172] mwifiex_sdio mmc0:0001:1: 24613008 : Tx timeout(#5), bss_type-num = 1-1
[246434.055171] mwifiex_sdio mmc0:0001:1: 24613408 : Tx timeout(#5), bss_type-num = 1-2
[246440.055174] mwifiex_sdio mmc0:0001:1: 24614008 : Tx timeout(#6), bss_type-num = 1-1
[246444.055169] mwifiex_sdio mmc0:0001:1: 24614408 : Tx timeout(#6), bss_type-num = 1-2
[246450.055170] mwifiex_sdio mmc0:0001:1: 24615008 : Tx timeout(#7), bss_type-num = 1-1
[246450.062958] mwifiex_sdio mmc0:0001:1: tx_timeout_cnt exceeds threshold. Triggering card reset!
[246450.071865] mwifiex_sdio mmc0:0001:1: info: shutdown mwifiex...
[246450.077990] mwifiex: Have pending ack frames!
[246450.082562] mwifiex: Have pending ack frames!
[246450.087585] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.093652] mwifiex_sdio mmc0:0001:1: Failed to delete mgmt IEs!
[246450.099792] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.105830] mwifiex_sdio mmc0:0001:1: Failed to stop the BSS
[246450.113200] br0: port 5(wlan2) entered disabled state
[246450.118793] device wlan2 left promiscuous mode
[246450.123406] br0: port 5(wlan2) entered disabled state
[246450.128856] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.134954] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.175564] br0: port 6(wlan2.1) entered disabled state
[246450.181431] br0: port 7(wlan2.2) entered disabled state
[246450.215256] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.221406] mwifiex_sdio mmc0:0001:1: Failed to delete mgmt IEs!
[246450.227557] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.233591] mwifiex_sdio mmc0:0001:1: Failed to stop the BSS
[246450.240969] br0: port 6(wlan2.1) entered disabled state
[246450.246582] device wlan2.1 left promiscuous mode
[246450.251406] br0: port 6(wlan2.1) entered disabled state
[246450.256992] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.263044] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.365245] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.371283] mwifiex_sdio mmc0:0001:1: Failed to delete mgmt IEs!
[246450.377425] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.383516] mwifiex_sdio mmc0:0001:1: Failed to stop the BSS
[246450.391004] br0: port 7(wlan2.2) entered disabled state
[246450.396674] device wlan2.2 left promiscuous mode
[246450.401399] br0: port 7(wlan2.2) entered disabled state
[246450.406901] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.412942] mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
[246450.583788] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[246450.590931] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[246460.615168] mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id = 0xa9, act = 0x0
[246460.624084] mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
[246460.630040] mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
[246460.635906] mwifiex_sdio mmc0:0001:1: is_cmd_timedout = 1
[246460.641414] mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
[246460.646838] mwifiex_sdio mmc0:0001:1: last_cmd_index = 0
[246460.652263] mwifiex_sdio mmc0:0001:1: last_cmd_id: a9 00 d0 00 d0 00 d0 00 d0 00
[246460.659782] mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 00 00 b0 00 dc 00 b0 00 dc
[246460.667385] mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 4
[246460.673248] mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: d0 80 d0 80 d0 80 d0 80 d0 80
[246460.681202] mwifiex_sdio mmc0:0001:1: last_event_index = 3
[246460.686799] mwifiex_sdio mmc0:0001:1: last_event: 55 00 37 00 55 00 55 00 55 00
[246460.694227] mwifiex_sdio mmc0:0001:1: data_sent=1 cmd_sent=1
[246460.700000] mwifiex_sdio mmc0:0001:1: ps_mode=0 ps_state=0
[246460.705754] mwifiex_sdio mmc0:0001:1: info: _mwifiex_fw_dpc: unregister device


Any clue on why this occurs?

Prior to the update, the router was stable.

Cheers.
Back to top View user's profile Send private message
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 13289
Location: Texas, USA
PostPosted: Fri Mar 18, 2022 20:36    Post subject: Reply with quote
If wlan2 (formerly ath2 in older DD-WRT versions) is the 88W8887 interface, it has no external antenna, is only for DFS radar detection, and should be disabled in DD-WRT (and OpenWRT).
Quote:
Note: The WRT3200ACM Firmware has a third WLAN (ath2). While some have had limited success enabling it it is recommended that it be Disabled. It was intended for DFS Radar Detection.

Sticky: DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes

https://forum.dd-wrt.com/wiki/index.php/Linksys_WRT1900AC
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.
Because they are tired of bottom-feeders and the same old hat.
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Back to top View user's profile Send private message Visit poster's website
SurprisedItWorks
DD-WRT Guru


Joined: 04 Aug 2018
Posts: 1386
Location: Appalachian mountains, USA
PostPosted: Sat Mar 19, 2022 15:10    Post subject: Reply with quote
Also do consider upgrading to a current build. Look for "new build" in the thread names in this forum. Generally the latest is the best, but always read the new-build thread just in case.

Wifi problems were recently fixed. I don't remember the exact build number when the fixed wifi appeared, but I believe it was fairly near the build you are using.
_________________
Five Linksys WRT1900ACSv2 routers on 51530: VLANs, VAPs, NAS, client mode, OpenVPN client (AirVPN), wireguard servers (via AirVPN port forwarding) and clients (AzireVPN, AirVPN), 3 DNSCrypt providers via VPN clients.
Back to top View user's profile Send private message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4959
PostPosted: Sun Mar 20, 2022 4:45    Post subject: Reply with quote
r47720 fixed wifi cutouts for Marvell series, but at this point upgrade to a build from this year so try r48607.

r44863 config is too old GUI factory defaults, reset button 10 seconds or Telnet root nvram erase && reboot.
Back to top View user's profile Send private message
NoGool4g
DD-WRT Novice


Joined: 12 Nov 2021
Posts: 7
PostPosted: Wed Apr 13, 2022 16:24    Post subject: Reply with quote
Thanks a lot guys for your help. I will proceed with your suggestions. Very Happy

Cheers.
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum