New Build - 03/15/2022 - r48494

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Mar 15, 2022 6:25    Post subject: New Build - 03/15/2022 - r48494 Reply with quote
Welcome to Broadcom r48494 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48432 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • TP-Link Archer C8 v2, v3 support.
SmartDNS ProFTPD BusyBox OpenSSL FreeRADIUS Unbound Squid SoftEther Zstd Asterisk Tor nginx SiS-PM dnsmasq MC Nmap ZFS mac80211 PHP iperf3 curl iptraf FRR
In-kernel Samba (ksmbd 3.4.4++) guest behavior now selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
AndyOxon
DD-WRT User


Joined: 16 Aug 2021
Posts: 81
Location: Oxford, UK.

PostPosted: Tue Mar 15, 2022 8:34    Post subject: All good Reply with quote
Router/Version: Netgear WNDR4500 / v2
File/Kernel: dd-wrt.v24-48494_NEWD-2_K3.x_giga-WNDR4500V2.bin / 4.4.302 #14884 Tue Mar 15 04:53:00 +07 2022 mips
Previous/Reset: r48432 / No
Mode/Status: Router, 2x AP, NAS, Entware / Perfect
Issues/Errors: Nothing obvious across UI, within logs, or core services.

_________________
Hardware (Device/Firmware/Roles):
Netgear RAX50 | Stock | Gateway, DHCP, AP, NAS.
Netgear WNDR4500v2 | FreshTomato | Router, WAP (2G), WDS-AP (5G), Samba, Torrent Client.
Netgear WNDR4500v2 | FreshTomato | Router, WAP (2G), WDS-AP (5G).
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2029

PostPosted: Tue Mar 15, 2022 16:18    Post subject: Reply with quote
R6200V2
DD-WRT v3.0-r48494 std (03/15/22)
Linux 4.4.302 #5440 SMP Mon Mar 14 05:39:21 +07 2022 armv7l

tftp R6250.chk over 48305
No reset
Uptime 15:19

wl0 WLAN Repeater, wl1 AP, wl1.1 unbridged VAP, static leases, Access Restrictions

All good
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Tue Mar 15, 2022 16:39    Post subject: Reply with quote
Router/Version: Asus RT-AC66U
File: dd-wrt-#####-Asus_RT-AC66U.trx
Firmware: DD-WRT v3.0-r48494 giga (03/15/22)
Kernel: Linux 4.4.302 #14884 Tue Mar 15 04:53:00 +07 2022 mips
Mode: Gateway
Previous: r48425
Reset?: N
Status: Working
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Tue Mar 15, 2022 17:51    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.302 #5440 SMP Mon Mar 14 05:39:21 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48432 std (03/01/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd (using Entware's php8) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Tue Mar 15, 2022 18:45    Post subject: Reply with quote
Broadcom
--------
Router/Version: WNDR4500v2 (x2)
File/Kernel: r48494
Previous/Reset: r48402/no reset
Mode/Status: OpenVPN client
Issues/Errors: None

Router/Version: RT-AC66U
File/Kernel: r48494
Previous/Reset: r48402/no reset
Mode/Status: Test router
Issues/Errors: None

_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Wed Mar 16, 2022 9:31    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r48494 std (03/15/22) (prev. DD-WRT v3.0-r48432 std (03/01/22))
Kernel: Linux 4.4.302 #5440 SMP Mon Mar 14 05:39:21 +07 2022 armv7l
Mode: Gateway, SFE disabled, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning, samba to access external (ext4) disk
Reset: No
Status: 10m up, ok.


Router/Version: Asus RT-N66U
File: dd-wrt.v24-48494_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r48494 big (03/15/22) (prev. DD-WRT v3.0-r48432 big (03/01/22))
Kernel: Linux 4.4.302 #14896 Tue Mar 15 05:09:17 +07 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 10m up, ok.
angler
DD-WRT User


Joined: 10 Feb 2012
Posts: 113

PostPosted: Wed Mar 16, 2022 12:31    Post subject: TEW-DRU811 Reply with quote
Router/Version: Trendnet TEW811DRU / DD-WRT v3.0-r48494 mini (03/15/22)
File/Kernel: trendnet-811dru-webflash.bin / Linux 4.4.302 #5443 Tue Mar 15 04:16:17 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48402 mini (02/20/22)/no
Mode/Status: Client AP/ Booted ok, CPU 80.2 °C / WL0 54.3 °C / WL1 60.4 °C
Issues/Errors: temps ok, UI too, thx devs for the hard work

update: still good, first stable build since 48402 for this device


Last edited by angler on Sat Mar 19, 2022 6:41; edited 1 time in total
PeteSL
DD-WRT User


Joined: 01 May 2007
Posts: 98

PostPosted: Wed Mar 16, 2022 16:49    Post subject: Reply with quote
Router/Version: Asus RT-AC3100
File/Kernel: asus_rt-ac3100-firmware.trx/Linux 4.4.302 #5445 SMP Tue Mar 15 04:25:58 +07 2022 armv7l
Previous/Reset: r48141 Experimental/No
Mode/Status: NAT,uPNP,SFE,G/N Mixed(VHT40),N/AC Mixed(VHT80),Wireguard site-site client;No DHCP,DNS,other svcs.
Issues/Errors: Once UI was displayed improperly using Opera (Chrome engine) but was able to view in Firefox.
First tried experimental build which showed everything was fine but the radio was not active (showed active in UI, just not on air).
Noticed that now only None,SFE,CTF are offered. Have been using SFE with no issues on the experimental builds so am leaving it for the standard build.
CPU usage is reasonable and temps are reasonable.
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Wed Mar 16, 2022 21:11    Post subject: Reply with quote
Firmware: v3.0-r48494 std (03/15/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302 #5440 SMP Mon Mar 14 05:39:21 +07 2022 armv7l
Previous: v3.0-r48432 std (03/01/22)
Mode/Status: AP wired and wireless / Up and running for 30 hours
Reset: Soft boot before and after upgrade
Temperatures: CPU 59.1 °C / WL0 45.8 °C / WL1 50.9 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
jheide44
DD-WRT Guru


Joined: 03 Sep 2013
Posts: 739

PostPosted: Sat Mar 19, 2022 19:03    Post subject: Netgear R6400v1 r48432 --> r48494 Reply with quote
Netgear R6400v1
r48432 --> r48494

**Dirty Flash -- NO RESET**

Firmware Version: r48494
Kernel Version: see SSH notes below

File: https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2022/03-15-2022-r48494/netgear-r6400/
File Name: netgear-r6400-webflash.bin
MD5: didn't log, already moved on


DDNS -- OK
SSH Tunneling -- OK



SSH notes:

DD-WRT v3.0-r48494 std (c) 2022 NewMedia-NET GmbH
Release: 03/15/22
Board: Netgear R6400 v1
Authenticating with public key "rsa-key-187"
Passphrase for key "rsa-key-187":
==========================================================

___ ___ _ _____ ______ ____ ___ee
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/

DD-WRT v3.0
https://www.dd-wrt.com


==========================================================


BusyBox v1.35.0 (2022-03-15 04:02:41 +07) built-in shell (ash)

root@DD-WRT:~# uname -r
4.4.302
root@DD-WRT:~#

_________________
reenignE esreveR
Resistance is NOT futile... It's Voltage divided by Current!


_.-:Curently Deployed Devices:-._
Loc_1.0: R6400 -- v3.0-r51887 std (02/28/23)
Loc_2.0: R6300v2 -- Kong PTB 35550M 03-28-2018

Others: too many others to list

R7000 (& similar HW) Tips/Tricks HERE.

Assumptions:
1. Everyone on the forum has read the relevant forum section announcements.
2. For Broadcom section we have ALL at least tried to understand the "Peacock" thread,
HERE
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 229

PostPosted: Sat Mar 19, 2022 20:44    Post subject: Reply with quote
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r48494 std (03/15/22)
Kernel Version: Linux 4.4.302 #5440 SMP Mon Mar 14 05:39:21 +07 2022 armv7l
Temperatures: CPU 68.0 °C / WL1 54.4 °C
Current Time: Sat, 19 Mar 2022 13:42:43
Uptime: 3 days, 20:23
Reset: No
GUI install over 48432
Installed using Brave browser over wireless
No issues

Thank you BS and thanks you gurus for your guides and wisdom

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
mj666
DD-WRT User


Joined: 26 Nov 2010
Posts: 58

PostPosted: Sun Mar 20, 2022 13:05    Post subject: Reply with quote
I still have random reboots for both RT-AC88U. The reboot frequency is from a couple of hours till a few days. Internet radio is stopping and not recover from time to time. Need to powercycle the receiver to fix the problem. Coming from build 48432 and will likely revert to 47900 which was more stable.
_________________
Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
mastaofdisastax
DD-WRT Novice


Joined: 16 Oct 2018
Posts: 19

PostPosted: Tue May 03, 2022 6:04    Post subject: Reply with quote
Router/Version: Linksys wrt320n
File: dd-wrt.v24-48494_NEWD-2_K3.x_mega_wrt320n
Kernel: Linux 4.4.302 #14900 Tue Mar 15 05:15:45 +07 2022 mips
Previous: 47206 (08/19/21)
Reset: before and after GUI flash
Mode/Status: Defaults, AP (NG-mixed and WPA2)
Issues/Errors: Yes

#1
The router froze when clicking Wireless > Advanced Settings during the initial configuration. After the reset/upgrade/reset, the first thing I did was save/apply Wireless Basic Settings and then save/apply Wireless Security settings. Then I clicked Advanced Settings and the GUI froze.

Using ethernet. No internet access. Hard reboot. Still no internet access. Router has WAN IP. Release/renew. Reboot. Still no internet or ping from windows. Reset router. Reconfigure wireless settings. Reboot. Success.

#2
Under Wireless > Basic Settings, disabling Wireless GUI Access has no effect after save/apply/reboot.

#3
While configuring the remaining settings over wireless (not configuring the wireless settings), the connection drops after clicking Save/Apply almost half the time. I have to manually reconnect to the wireless network to proceed.

#4
Wifi has been flaky in general for all clients, similar to my last build, 47206. Wireless devices lose internet access and have to be manually disconnected/reconnected 0-4 times per day. I've had to hard reboot the router 4 times since 2022-03-15. 47206 was worse, however. 47206's wifi got worse and worse over time, to the point that it was dropping some or all clients every couple hours. I know that's an older build, but I mention it because this build also has wireless issues, though it is slightly better.

#5
I think it would be nice if the configuration pages don't automatically scroll to the top when you click Save (for how often it seems I have to hit Apply right after.) I wonder if that's the case for the majority. Alternatively, could we add copies of the Save/Apply bottons at the top of the pages?


I know this is not the latest build, but I wanted to point out these issues in case they are still issues. I'll update to the latest build, retest, and post updates.
Lewis Matthews
DD-WRT Novice


Joined: 09 May 2022
Posts: 3

PostPosted: Mon May 09, 2022 9:07    Post subject: Reply with quote
mastaofdisastax wrote:
Router/Version: Linksys wrt320n
File: dd-wrt.v24-48494_NEWD-2_K3.x_mega_wrt320n
Kernel: Linux 4.4.302 #14900 Tue Mar 15 05:15:45 +07 2022 mips
Previous: 47206 (08/19/21)
Reset: before and after GUI flash
Mode/Status: Defaults, AP (NG-mixed and WPA2)
Issues/Errors: Yes

#1
The router froze when clicking Wireless > Advanced Settings during the initial configuration. After the reset/upgrade/reset, the first thing I did was save/apply Wireless Basic Settings and then save/apply Wireless Security settings. Then I clicked Advanced Settings and the GUI froze.

Using ethernet. No internet access. Hard reboot. Still no internet access. Router has WAN IP. Release/renew. Reboot. Still no internet or ping from windows. Reset router. Reconfigure wireless settings. Reboot. Success.

#2
Under Wireless > Basic Settings, disabling Wireless GUI Access has no effect after save/apply/reboot.

#3
While configuring the remaining settings over wireless (not configuring the wireless settings), the connection drops after clicking Save/Apply almost half the time. I have to manually reconnect to the wireless network to proceed.

#4
Wifi has been flaky in general for all clients, similar to my last build, 47206. Wireless devices lose internet access and have to be manually disconnected/reconnected 0-4 times per day. I've had to hard reboot the router 4 times since 2022-03-15. 47206 was worse, however. 47206's wifi got worse and worse over time, to the point that it was dropping some or all clients every couple hours. I know that's an older build, but I mention it because this build also has wireless issues, though it is slightly better.

#5
I think it would be nice if the configuration pages don't automatically scroll to the top when you click Save (for how often it seems I have to hit Apply right after.) I wonder if that's the case for the majority. Alternatively, could we add copies of the Save/Apply bottons at the top of the pages?


I know this is not the latest build, but I wanted to point out these issues in case they are still issues. I'll update to the latest build, retest, and post updates.

Did you check the server settings?
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum