New Build - 01/28/2022 - r48218

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Fri Jan 28, 2022 4:29    Post subject: New Build - 01/28/2022 - r48218 Reply with quote
Welcome to Atheros r48218 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48208 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
Privoxy, iperf3, CAKE, Asterisk, SmartDNS, curl, ProFTPD, BusyBox, OpenSSL, mac80211, FreeRADIUS, dnsmasq, Unbound, zfs, SoftEther, Squid, zstd, Tor
In-kernel Samba (ksmbd 3.4.4): guest behavior is now selectable. • WSD update ANTFS/NTFS3 kernel mode driver++++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed. • 47032 #3002 TL-WA901NDv2
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed. • TL-WR841HPv3 support. • R9000 PPPoE fixed (#7491).
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save
Add static or delete DHCP lease from clients table in Status -> LAN. Upgrades to forwarding delete, NAT / QoS tabs & more.
Recent features, enhancements, fixes: Dynamic WDS, Stations, Site Survey, Radioname, Switch Config, Tagging and DTAG.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Fri Jan 28, 2022 6:52    Post subject: r48218 Reply with quote
DD-WRT R9000
Router ModelNetgear Nighthawk X10
Firmware VersionDD-WRT v3.0-r48218 std (01/28/22)
Kernel VersionLinux 4.9.298 #609 SMP Thu Jan 27 21:02:15 +07 2022 armv7l
Current TimeThu, 27 Jan 2022 23:50:07
Uptime2 min
Reset:No
GUI over r48208
Issues: All good

Thank you BS & Devs
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Fri Jan 28, 2022 9:25    Post subject: Reply with quote
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r48218 std (01/28/22)
Kernel Version Linux 3.18.140-d6 #135228 Fri Jan 28 05:47:42 +07 2022 mips


update: CLI r48208 > r48218
reset: NO
mode: Gateway
status: Operational 2h+
errors:

Thanks BS for adding the DNSSEC trust-anchor, however if GUI option validate DNSSEC is used no DNS no internet, but i don't need to use it anyway...as im trying to make stubby to work with DNSSEC instead...will post results later, of what i was trying, so far with self added trust-anchor at /opt was not working..lets see if it will work now...(i doubt Laughing) but thanks anyway...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Fri Jan 28, 2022 10:07    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r48218 std (01/28/22)
Linux 4.9.298 #721 SMP Thu Jan 27 18:14:17 +07 2022 armv7l
GUI install over r48028
after 3 hrs would NOT resolve sites --- the recursive DNS resolver showed over 4000 active IP connections but none working.
Local DNS was still good. I disabled 'unbound'
Have two Verisign DNS servers set & one OpenNic ...they do DNSSEC anyways Cool
rebooted after change DNS --- uptime 9:47 ...all is very good
Very Happy
m3lab
DD-WRT Novice


Joined: 07 Oct 2018
Posts: 2

PostPosted: Fri Jan 28, 2022 10:11    Post subject: TP-LINK WR841N WiFi Power Reply with quote
Router/Version: TP-LINK WR841N
Previous/Reset: r48081 -> r48138 -> r48218
Mode/Status: AP/ Ok
Issues: WiFi TX power is 16dBm

Buongiorno,

I live in Italy and as far as I know the max Tx power could be 20dBm but here is limited to 16dBm: is this an error?

Is/are there hint(s), tip(s) to reach max power?

Thanks in advance,
.m.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Fri Jan 28, 2022 11:21    Post subject: Re: TP-LINK WR841N WiFi Power Reply with quote
m3lab wrote:
Router/Version: TP-LINK WR841N
Previous/Reset: r48081 -> r48138 -> r48218
Mode/Status: AP/ Ok
Issues: WiFi TX power is 16dBm

Buongiorno,

I live in Italy and as far as I know the max Tx power could be 20dBm but here is limited to 16dBm: is this an error?

Is/are there hint(s), tip(s) to reach max power?

Thanks in advance,
.m.


Different country regions have different regulations regarding Channels dBm MAX power...try to change your country domain to Canada or Haiti...(I always use Channel 11 too) and check again...
your router max power is 20dBm so it wont go more than that...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Fri Jan 28, 2022 12:00    Post subject: Reply with quote
Netgear WNDR3700 V4
DD-WRT v3.0-r48218 std (01/28/22)
Linux 3.18.140-d6 #135256 Fri Jan 28 06:42:55 +07 2022 mips
switch / ovpn server
all ok --- uptime 1:47

---
NOTE:
my previous post about 'unbound' quit working ---
That is NOT necessarily a DD-WRT problem ...most likely not..could have been several things...
...lots of bad crazies still roam this world Rolling Eyes
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Fri Jan 28, 2022 13:40    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r48218 std (01/28/22)
Previous/Reset: DD-WRT v3.0-r48208 std (01/26/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Although the build did load the leases file on reboot, and the Use JFFS2 for client lease DB option was checked, I had to click Apply on the page to get the dnsmasq.leases file to start updating on /jffs. Also, the Active Clients table on the Status, LAN tab had many Hostnames as * until I erased /tmp/dnsmasq.leases.

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
MesMurized
DD-WRT User


Joined: 08 Aug 2017
Posts: 84

PostPosted: Fri Jan 28, 2022 18:58    Post subject: Reply with quote
Router Model: Netgear Nighthawk X10 P9000
Firmware Version: DD-WRT v3.0-r48218 std (01/28/22)
Kernel Version: Linux 4.9.298 #609 SMP Thu Jan 27 21:02:15 +07 2022 armv7l
Previous/Reset: r48141, Web update w/o reset
Mode/Status: AP, Gateway / Working
Setup/Using: Vanilla 2.4,DD-WRT, 5GHz, vlan, OpenVPN w/PBR, DDNS, DNSmasq, 2xUSB+Samba
Uptime 1 hr
Minor Issues: After boot, USBs were dirty (not umounted during upgrade?) ...and...
Quote:
Previously unseen log warnings
Dec 31 16:00:48 user.info : [openvpn] : General Killswitch for OpenVPN enabled from OpenVPN
Dec 31 16:00:48 daemon.warn openvpn[2222]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 16:00:48 daemon.warn openvpn[2222]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 16:00:48 daemon.warn openvpn[2222]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 16:00:48 daemon.warn openvpn[2222]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 16:00:48 daemon.warn openvpn[2222]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 16:00:48 daemon.warn openvpn[2222]: WARNING: file '/tmp/openvpncl/credentials' is group or others accessible

_________________
Current: Netgear R9000 DD-WRT v3.0-r55460 std (03/25/24)
Retired: Linksys WRT32X r39296, TP-Link Archer C7 v2, LinkSys WRT54G v5
m3lab
DD-WRT Novice


Joined: 07 Oct 2018
Posts: 2

PostPosted: Fri Jan 28, 2022 18:59    Post subject: Re: TP-LINK WR841N WiFi Power Reply with quote
Alozaros wrote:

Different country regions have different regulations regarding Channels dBm MAX power...try to change your country domain to Canada or Haiti...(I always use Channel 11 too) and check again...
your router max power is 20dBm so it wont go more than that...


Thanks: yesterday, I've used Canada and dBm max was 18... Following your suggestion (Haiti) it is still 16 dBm ...

Sad

.m.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Fri Jan 28, 2022 20:09    Post subject: Re: TP-LINK WR841N WiFi Power Reply with quote
m3lab wrote:
Alozaros wrote:

Different country regions have different regulations regarding Channels dBm MAX power...try to change your country domain to Canada or Haiti...(I always use Channel 11 too) and check again...
your router max power is 20dBm so it wont go more than that...


Thanks: yesterday, I've used Canada and dBm max was 18... Following your suggestion (Haiti) it is still 16 dBm ...

Sad

.m.


that is the hardware max of your unit i guess...
some units have more powerful amps...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Fri Jan 28, 2022 20:17    Post subject: Re: TP-LINK WR841N WiFi Power Reply with quote
Alozaros wrote:
that is the hardware max of your unit i guess...
some units have more powerful amps...


not always the amps sometimes many times its just stupid eeprom etc limits cause of idiot companies limiting their own products' potential just cause..

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Fri Jan 28, 2022 21:17    Post subject: Reply with quote
Yes, has nothing to do with government regulations or anything like that, lol.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
slowmotionscene
DD-WRT User


Joined: 03 Oct 2014
Posts: 364

PostPosted: Sun Jan 30, 2022 17:44    Post subject: Reply with quote
works fine


TP-Link TL-WR1043ND

DD-WRT v3.0-r48218 std (01/28/22)

Linux 3.10.108-d11 #100058 Fri Jan 28 04:46:51 +07 2022 mips7
Sun, 30 Jan 2022 18:43:44

24 min


Atheros AR9132 rev 2 (0xb9)
Број CPU језгара
1
CPU Features
MIPS32r1 MIPS32r2 MIPS16

400 MHz

21%
0.21, 0.49, 0.37
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Sun Jan 30, 2022 18:06    Post subject: Reply with quote
Up and stable for 20 hours. No issues, good build. Thanks, BrainSlayer and Team!
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum