Alozaros
DD-WRT Guru
Joined: 16 Nov 2015
Posts: 6440
Location: UK, London, just across the river..
|
 Posted: Sun Jan 23, 2022 16:47 Post subject: |
 |
the right way to change the ddwrt GUI http or https microserver port, to something other than 80 or 443
login over telnet or ssh and issue these commands
nvram set http_lanport=8083 <---- Or whatever port you want
nvram commit
reboot
Then access your router via
http://routeripaddress:8083
same for https, 443
just the access is https://routeripaddress:443 or what ever port you changed to....
and nvram command is:
nvram set https_lanport=
_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913 |
|
