New Build - 01/10/2022 - r48075

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4334

PostPosted: Mon Jan 10, 2022 6:42    Post subject: New Build - 01/10/2022 - r48075 Reply with quote
Welcome to Atheros r48075 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48068 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
CoovaChilli, Privoxy, iperf3, CAKE, FreeRADIUS, dnsmasq, Unbound, Squid, Asterisk, SmartDNS, curl, ProFTPD, Tor, BusyBox, OpenSSL, mac80211, MiniDLNA
In-kernel Samba (ksmbd 3.4.3+): guest behavior is now selectable. • WSD updateANTFS/NTFS3 kernel mode driver+++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed. • 47032 #3002 TL-WA901NDv2
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed. • TL-WR841HPv3 support. • R9000 PPPoE fixed (#7491).
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save
• Add static or delete DHCP lease from DHCP clients table in Status -> LAN. Upgrades to forwarding delete in NAT / QoS tabs.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5897
Location: Texas

PostPosted: Mon Jan 10, 2022 7:49    Post subject: Reply with quote
Linksys EA8500 ...main gateway router
DD-WRT v3.0-r48075 std (01/10/22)
Linux 4.9.296 #658 SMP Sun Jan 9 13:18:53 +07 2022 armv7l
GUI install over r48068
37 staic DHCP leases --- some for main net & some for br1
VANILLA FW for both raios
wlan0.1 + wlan1.1 + 1 wired port as VLAN all via isolated br1
everything uses unbound
couple builds back I done away with silly 'Forced DNS Redirection' for br1 Smile
port range forwarding
32GB ext4 used as samba share
local DNS
OVPN server
HFSC - CAKE
uptime 9:25
she's all good

#

Netgear WNDR3700 V4
DD-WRT v3.0-r48075 std (01/10/22)
Linux 3.18.140-d6 #133784 Mon Jan 10 07:43:18 +07 2022 mips
GUI install over r48068
switch / ovpn server
uptime 6:16
good
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 162
Location: Maharashtra, India

PostPosted: Mon Jan 10, 2022 8:16    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r48075 std (01/10/22)
Kernel: Linux 4.9.296 #660 SMP Mon Jan 10 03:05:38 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r47911 std (12/23/21)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, WireGuard, Samba

Status: Working Fine; running DD-WRT firmware type for 2.4ghz & 5ghz, uptime 1+ Hrs.


Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.
giuliomagnifico
DD-WRT User


Joined: 11 Apr 2016
Posts: 454
Location: Italy

PostPosted: Mon Jan 10, 2022 8:20    Post subject: Reply with quote
Router/Version: Netgear R7800
File/Kernel: 4.9.296 #660
Previous/Reset: CLI update from r48068 / No reset
Mode/Status: Gateway / Working
Setup/Using: Vanilla on 2.4 and DD-WRT on 5GHz, WAN, QoS, Wireguard tunnel, DDNS, DNSmasq.
Issues/Errors: Works fine no errors

All fine untill now. Thanks to devs Cool
Jovan
DD-WRT User


Joined: 06 Nov 2018
Posts: 118

PostPosted: Mon Jan 10, 2022 8:21    Post subject: Reply with quote
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r48075 std (01/10/22)
Kernel Version Linux 3.18.140-d6 #133742 Mon Jan 10 06:34:55 +07 2022 mips
Updated from r48068 via CLI
Reset: no
Working Ok as AP, Mixed, HT40
Issue: Save and Apply buttons on UPnP WebUi page don't work. Issue began on r48068, on r47976 it works fine.

Edit:
Errors in Chrome console:

Code:
UPnP.asp:19 Uncaught SyntaxError: Unexpected end of input
UPnP.asp:49 Uncaught ReferenceError: setUPnP is not defined
    at HTMLInputElement.onclick (UPnP.asp:49:511)
onclick @ UPnP.asp:49
UPnP.asp:53 Uncaught ReferenceError: to_submit is not defined
    at HTMLInputElement.onclick (UPnP.asp:53:10)
onclick @ UPnP.asp:53
UPnP.asp:49 Uncaught ReferenceError: setUPnP is not defined
    at HTMLInputElement.onclick (UPnP.asp:49:343)
onclick @ UPnP.asp:49
UPnP.asp:53 Uncaught ReferenceError: to_submit is not defined
    at HTMLInputElement.onclick (UPnP.asp:53:10)
onclick @ UPnP.asp:53
UPnP.asp:53 Uncaught ReferenceError: to_submit is not defined
    at HTMLInputElement.onclick (UPnP.asp:53:10)
onclick @ UPnP.asp:53
UPnP.asp:53 Uncaught ReferenceError: to_apply is not defined
    at HTMLInputElement.onclick (UPnP.asp:53:10)
onclick @ UPnP.asp:53
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10368
Location: Netherlands

PostPosted: Mon Jan 10, 2022 11:33    Post subject: Reply with quote
@Jovan, I have identified the error, will see to it Smile
_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7339
Location: Dresden, Germany

PostPosted: Mon Jan 10, 2022 11:53    Post subject: Reply with quote
fixed
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 136

PostPosted: Mon Jan 10, 2022 12:46    Post subject: r48075 Reply with quote
Netgear Nighthawk X10
Firmware VersionDD-WRT v3.0-r48075 std (01/10/22)
Kernel VersionLinux 4.9.296 #606 SMP Fri Jan 7 02:15:56 +07 2022 armv7l
Current TimeMon, 10 Jan 2022 05:42:52
Uptime2 min
GUI install over r48068
Reset:No
All good

thanks BS & devs
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 764

PostPosted: Mon Jan 10, 2022 13:33    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r48075 std (01/10/22)
Previous/Reset: DD-WRT v3.0-r48068 std (01/09/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Although the build did load the leases file on reboot, and the Use JFFS2 for client lease DB option was checked, I had to click Apply on the page to get the dnsmasq.leases file to start updating on /jffs. Also, the Active Clients table on the Status, LAN tab had many Hostnames as * until I erased /tmp/dnsmasq.leases.

_________________
Netgear R9000 X10
DD-WRT v3.0-r50274 std (09/27/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
Jovan
DD-WRT User


Joined: 06 Nov 2018
Posts: 118

PostPosted: Mon Jan 10, 2022 14:23    Post subject: Reply with quote
egc wrote:
@Jovan, I have identified the error, will see to it Smile

BrainSlayer wrote:
fixed

Many thanks!
Be Inspired
DD-WRT Novice


Joined: 20 Nov 2019
Posts: 4

PostPosted: Mon Jan 10, 2022 20:54    Post subject: Reply with quote
Hello,

I have a TP-LINK TL-WR1043ND v2 (r48075) configured as access point and when i want to log in in webui and type wrong username or password it doesnt ask again for username or password but the page freezes and doesnt show (401 unathorized page).

Thanks in advance and sorry for my english.

_________________
TP-LINK TL-WR1043ND v2 Wireless access point
markLopez9
DD-WRT Novice


Joined: 30 Apr 2020
Posts: 15

PostPosted: Sat Jan 22, 2022 18:09    Post subject: strange behavior with WiFi LED Reply with quote
Router/Version: tl-mr3220v2
File/Kernel: r48075
Previous/Reset: old version back in 2020
Mode/Status: gateway
Issues/Errors:

I just have a quick question regarding the LED on the front panel. Normally, the WiFi LED is lit but steady when there are no clients connected (or no traffic from connected clients). However, I noticed that the LED was continuously blinking even if there are no connected wireless clients. Here's a copy of the logs:

Jan 22 18:24:33 ntpclient Connecting to 2.pool.ntp.org [98.191.213.14] ...
Jan 22 18:24:33 ntpclient Time set from 2.pool.ntp.org [98.191.213.14].
Jan 22 18:24:33 process_monitor cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jan 22 18:24:33 logger : [sfe] : shortcut forwarding engine successfully stopped
Jan 22 18:24:34 logger : [sfe] : shortcut forwarding engine successfully started
Jan 22 18:48:02 httpd [httpd] : Authentication fail
Jan 22 18:48:02 httpd [httpd] : Request Error Code 401: Authorization required. Wrong username and/or password!
Jan 22 19:24:36 ntpclient Connecting to 2.pool.ntp.org [69.164.202.202] ...
Jan 22 19:24:36 ntpclient Time set from 2.pool.ntp.org [69.164.202.202].
Jan 22 19:24:36 process_monitor cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jan 22 19:24:36 logger : [sfe] : shortcut forwarding engine successfully stopped
Jan 22 19:24:37 logger : [sfe] : shortcut forwarding engine successfully started
Jan 22 20:24:38 ntpclient Connecting to 2.pool.ntp.org [143.198.227.207] ...
Jan 22 20:24:38 ntpclient Time set from 2.pool.ntp.org [143.198.227.207].
Jan 22 20:24:38 process_monitor cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jan 22 20:24:38 logger : [sfe] : shortcut forwarding engine successfully stopped
Jan 22 20:24:40 logger : [sfe] : shortcut forwarding engine successfully started
Jan 22 21:24:41 ntpclient Connecting to 2.pool.ntp.org [45.79.51.42] ...
Jan 22 21:24:41 ntpclient Time set from 2.pool.ntp.org [45.79.51.42].
Jan 22 21:24:41 process_monitor cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Jan 22 21:24:41 logger : [sfe] : shortcut forwarding engine successfully stopped
Jan 22 21:24:42 logger : [sfe] : shortcut forwarding engine successfully started

I observed that happen from 18:30 onwards. I have Wireless MAC filtering in a whitelist approach, and none of my whitelisted devices were connected at the time.

Out of curiousity though, I took an old tablet (which is not whitelisted) and tried to connect it to my router. As expected, it failed to connect due to the MAC filtering in place. But when I went back to the logs, there were no entries for that failed connection attempt either.

As of 23:30 local time, the blinking stopped. I checked the logs and did not find anything except for the NTP traffic.

The available logs really are not telling me anything. Can someone help interpret why the WiFi LED is behaving this way? Also, is there a setting which I should be enabling for more visibility? Thanks in advance.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum