New Build - 01/21/2022 - r48141

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3897

PostPosted: Fri Jan 21, 2022 4:24    Post subject: New Build - 01/21/2022 - r48141 Reply with quote
Welcome to Marvell r48141 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48138 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
Privoxy, iperf3, CAKE, Asterisk, SmartDNS, curl, ProFTPD, Tor, BusyBox, OpenSSL, mac80211, FreeRADIUS, dnsmasq, Unbound, zfs, SoftEther, Squid, zstd
In-kernel Samba (ksmbd 3.4.3++): guest behavior now selectable. • WSD updateANTFS/NTFS3 kernel mode driver+++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed.
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed.
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save
• Add static or delete DHCP lease from DHCP clients table in Status -> LAN. Upgrades to forwarding delete in NAT / QoS tabs.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
oliver44
DD-WRT User


Joined: 01 Jun 2016
Posts: 215
Location: Romania

PostPosted: Sat Jan 22, 2022 8:23    Post subject: Reply with quote
Hello all,

DD-WRT Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r48141 std (01/21/22)
Kernel Version Linux 4.9.297 #3035 SMP Fri Jan 21 03:12:25 +07 2022 armv7l

Uptime 1h

update- browser-waterfox,I switched directly from the first partition in the original software to the current version of ddwrt,after installation and config rebooted manually ,i use default theme,


Connection Type PPPoE-IPv6 Type DHCPv6 with Prefix Delegation 1Gbps - Avoid DHCP6 client release on Enable, Radvd-Enable All-ok

Port Forwarding ok

Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36-Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N, Width VHT 40 Mhz-Wireless Channel-6, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok

Congratulations to all for the work done on this firmware which is more and more stable for a year !!!




And yet I have to bring something negative to this variant, I have a 1Gbps connection, in speed test on ipv4 everything is fine 930Mbps download as well as upload, the problem occurs on ipt6 speedtest on https://www.ziggo.nl/speedtest, I would encounter the following anomaly, it does not exceed 500Mbps download, if I restart the router I reach the maximum speed of 930Mbps, but soon again it is capped at 500Mbps download, this phenomenon I did not meet in the previous version 01-11-2022-r48081!

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS RCS & RDS 1Gbps
Linksys WRT1900ACS v.2 -OpenWrt/DD-WRT
WDR3600 rev.1.5 - OpenWrt
oliver44
DD-WRT User


Joined: 01 Jun 2016
Posts: 215
Location: Romania

PostPosted: Sat Jan 22, 2022 11:49    Post subject: Reply with quote
I have to come up with a remark, I do the test on https://www.ziggo.nl/speedtest with the pale mon browser, today I made an update to this browser and I think the problem is with it, with other browsers I can't reach speed of 1 gigabit in ipv6 speedtest.
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS RCS & RDS 1Gbps
Linksys WRT1900ACS v.2 -OpenWrt/DD-WRT
WDR3600 rev.1.5 - OpenWrt


Last edited by oliver44 on Sun Jan 23, 2022 6:38; edited 1 time in total
gospeedgo
DD-WRT User


Joined: 23 Jul 2018
Posts: 146
Location: Italy

PostPosted: Sat Jan 22, 2022 17:30    Post subject: Reply with quote
The jffs partition still does not work
_________________
Linksys WRT3200ACM AP 1
Linksys WRT3200ACM AP 2 + WDS AP
Linksys WRT3200ACM WDS STATION + WDS VAP
DD-WRT Version: r48494
OpenVPN Server
OpenVPN Client
Cloudflare
Express VPN
Raspberry Pi-hole
likeyea
DD-WRT Novice


Joined: 05 Jan 2022
Posts: 5

PostPosted: Sun Jan 23, 2022 5:15    Post subject: Reply with quote
gospeedgo wrote:
The jffs partition still does not work


confirmed.

jffs2 appears to initialize on the reboot, but changing settings afterwards seems to arbitrarily break this; setting dhcp to use jffs2 for leases does not appear to write a useable file to jffs2, even though it looks like the setting is present in the config file, and the lease file itself is there; it just never seems to get used/updated again after initial creation.

Unfortuantely there doesn't seem to be a way for me to consistently reproduce this because of the fact that if you set it up, it appears to work, initially. But then turn on storing leases in jffs2 and leases break. Then you reboot it in the course of changing other settings... and at some point jffs2 is just gone (ie- not listed as mounted). i've rebooted it just after config and had the jffs2 part stay "active" after reboot too, but leases still do not work if stored there.. and jffs2 will still disappear at some unspecified point after doing this.

I've tried this with all firmwares since 47942, same result. Have not checked earlier versions.

edit- iirc the first version i tried as noob was r47874. jffs2 didn't work at all in that one, not even mountable. Being a noob, i just figured the 1200ac just ..didn't support it.. XD

I have two 1200ac v1's. Both have had the same result.
gospeedgo
DD-WRT User


Joined: 23 Jul 2018
Posts: 146
Location: Italy

PostPosted: Sun Jan 23, 2022 6:54    Post subject: Reply with quote
ok thanks, I understand the problem perfectly, but that you know, what is the latest firmware where jffs works perfectly?
_________________
Linksys WRT3200ACM AP 1
Linksys WRT3200ACM AP 2 + WDS AP
Linksys WRT3200ACM WDS STATION + WDS VAP
DD-WRT Version: r48494
OpenVPN Server
OpenVPN Client
Cloudflare
Express VPN
Raspberry Pi-hole
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9602
Location: Netherlands

PostPosted: Sun Jan 23, 2022 8:06    Post subject: Reply with quote
Why not use an USB stick?

Writing to flash ram wears it out.

P.S. why are you writing the leases File to JFFS2?

It is very easy to add static leases with dhcp-host in additional dnsmasq options so it is a simple copy paste when you reset.

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
gospeedgo
DD-WRT User


Joined: 23 Jul 2018
Posts: 146
Location: Italy

PostPosted: Sun Jan 23, 2022 8:20    Post subject: Reply with quote
i currently use a powered hd, how can i mount it without using jffs?
_________________
Linksys WRT3200ACM AP 1
Linksys WRT3200ACM AP 2 + WDS AP
Linksys WRT3200ACM WDS STATION + WDS VAP
DD-WRT Version: r48494
OpenVPN Server
OpenVPN Client
Cloudflare
Express VPN
Raspberry Pi-hole
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9602
Location: Netherlands

PostPosted: Sun Jan 23, 2022 9:26    Post subject: Reply with quote
A powered HD is something else than JFFS2.

JFFS2 (as set on Administration tab) is the use of a part of your routers Flash RAM for permanent storage.

I think that JFFS2 is not compatible with the use of a /jffs partition on a USB stick/drive

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
likeyea
DD-WRT Novice


Joined: 05 Jan 2022
Posts: 5

PostPosted: Sun Jan 23, 2022 9:55    Post subject: Reply with quote
egc wrote:
A powered HD is something else than JFFS2.

JFFS2 (as set on Administration tab) is the use of a part of your routers Flash RAM for permanent storage.

I think that JFFS2 is not compatible with the use of a /jffs partition on a USB stick/drive


jffs2 buggyness happens with or without using usb storage. I can't remember if the jffs2 partition crapped out all the way and dissappeared with the external mount applied or not, but storing lease data on jffs2 does not work with the external mounted storage either. The usb storage was a microsd formatted with 2 ext2 partitions, named jffs2 and opt respectively.
gospeedgo
DD-WRT User


Joined: 23 Jul 2018
Posts: 146
Location: Italy

PostPosted: Sun Jan 23, 2022 9:56    Post subject: Reply with quote
egc wrote:
A powered HD is something else than JFFS2.

JFFS2 (as set on Administration tab) is the use of a part of your routers Flash RAM for permanent storage.

I think that JFFS2 is not compatible with the use of a /jffs partition on a USB stick/drive

And how can I use an HD connected to the router? if i can't mount it with jffs how do i do it? on version 44048 it works perfectly.

_________________
Linksys WRT3200ACM AP 1
Linksys WRT3200ACM AP 2 + WDS AP
Linksys WRT3200ACM WDS STATION + WDS VAP
DD-WRT Version: r48494
OpenVPN Server
OpenVPN Client
Cloudflare
Express VPN
Raspberry Pi-hole
likeyea
DD-WRT Novice


Joined: 05 Jan 2022
Posts: 5

PostPosted: Sun Jan 23, 2022 10:02    Post subject: Reply with quote
gospeedgo wrote:
ok thanks, I understand the problem perfectly, but that you know, what is the latest firmware where jffs works perfectly?


I didn't check. I put openwrt on the main router and left the secondary router as dd-wrt because it's only a repeater
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9602
Location: Netherlands

PostPosted: Sun Jan 23, 2022 10:24    Post subject: Reply with quote
On Administration page do NOT enable JFFS2 support if you want to use a /jffs partition on an USB stick/harddrive

Simply make an ext4 partition on your harddrive and label it /jffs.

Enable automount and the partition should automatically mount to /jffs


See attachment

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
gospeedgo
DD-WRT User


Joined: 23 Jul 2018
Posts: 146
Location: Italy

PostPosted: Sun Jan 23, 2022 17:07    Post subject: Reply with quote
I connected another HD, formatted in ext4, enabled jffs from the admin panel and now it works perfectly.
_________________
Linksys WRT3200ACM AP 1
Linksys WRT3200ACM AP 2 + WDS AP
Linksys WRT3200ACM WDS STATION + WDS VAP
DD-WRT Version: r48494
OpenVPN Server
OpenVPN Client
Cloudflare
Express VPN
Raspberry Pi-hole
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 670

PostPosted: Fri Jan 28, 2022 13:50    Post subject: Reply with quote
egc wrote:
I think that JFFS2 is not compatible with the use of a /jffs partition on a USB stick/drive


I have a /jffs partition on a USB stick working on my R9000. I use it to store the dnsmasq.leases file. It works.

_________________
Netgear R9000 X10
DD-WRT v3.0-r48897 std (05/18/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
Vanilla Firmware, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 450, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 450, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum